KUXIU SX-X23 3in1 Magnetic Phone Stand Wireless Charger User Manual
- June 10, 2024
- KUXIU
Table of Contents
KUXIU SX-X23 3in1 Magnetic Phone Stand Wireless Charger
Product Introduction
Thanks for your choosing our wireless charger, Before you use this product,
Please read this manual carefully and save it.
Parameters
- Name: 3 in 1 Magnetic Phone Stand Wireless Charger
- Model: SX-X23
- Material: Aluminium+ Silica gel
- Color: Silver/ Space Gray
- Interface: Type-C input
- Input: DC 5V=3A,9V=2.22A,l2V=3A max
- Output: 3W/5W/7.5W/10W/15W (Total 30W max)
Compatibility:
The Magnetic Wireless Charger maintains compatibility with Qi charging And
compatibility with a MagSafe-capable device. It also can be used to wirelessly
charge other devices with Qi-certified Apple Watch. (Compatibility with Apple
official accessories case, and may not be compatible with unofficial
accessories.)
Note:
The parameters is derived from the actual measurement of the product
The actual parameters will vary with the product or other factors.
Packing list
- Wireless Charger x l
- UserManual x l
- USB Cable xl
User instruction
- Insert the USB cable plug into the power adapter and the wireless charger;
- For more stability on the desktop, please remove the film on the surface of the non-slip mat.
- Close the wireless charger to the mobile device that supports wireless charging, the wireless charger will automatically be attached to the wireless receiving position;
- If the mobile device has no magnetic attraction function, you need to manually adjust the circle Iron sticker to the back of the mobile device, Try to ensure that the centers of the two are aligned. (The wireless receiving position is generally in the center of the mobile device)
Precautions
When the wireless charger is charging the mobile device, if you run a power- consuming App the mobile device or use the App on the device for a long time, the heat of the mobile device will increase. This is normal and will not affect the service life of the device Or performance.
- This charger compatibility with a MagSafe-capable device. ;
- This charger is compatible with Apple’s official accessories case for iPhone, and may not be compatible with unofficial accessories;
- It recommends using PD-certified adapters;
- The operating temperature is between oc and 35°C. If the storage temperature is between -2D”Cond 50″C.lf used outside the recommended temperature, it may damage your device;
- Do not allow children or animals to chew or swallow the device;
- Do not disassemble, modify or repair the device;
- Do not place magnetic stripe cards (including credit cards, phone cards, bankbooks, and registration cards) near the device being charged to avoid damage to the magnetic stripe card due to the magnetic field generated by the device.
FCC Warning Statement
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and the receiver.
- Connect the equipment to on outlet on o circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>