Acer AL1916W 19-Inches Widescreen LCD Monitor Quick Start Guide
- June 11, 2024
- Acer
Table of Contents
Acer AL1916W 19-Inches Widescreen LCD Monitor
Important
NOTE: This product can only operate with the attached power accessories.
Before installing your LCD display, consider the following with reference to the conditions under which the display is to be installed:
- Make sure that the voltage of the product conforms to the local voltage.
- Don’t allow children to operate the product alone.
- For more information about safety, read the manual in the attached CD- ROM.
- To minimize the reflection of the display, protect your eyes, and ensure premium quality, don’t install your LCD display near windows or with Keep the display away from your eyes by at least 30 cm.
- The upper edge of the display should be a little higher than your sight.
- Adjust the front and back angles of the display based on your visual angle so that you can view the display comfortably.
Components and Accessories
Installation Guide ****
Note: Read the [Important] section carefully before starting the installation
Quick Installation
Complete the following steps for quick installation: (See the figure)
Assemble the seat of the display
- Take the seat out of the box and place it on a flat table.
- Take your LCD display out of the carton and assemble the display and seat it along the rail. You will hear a click sound when the display and seat are engaged correctly.
Connection to PC
- Make sure that the power supply of your PC is turned off and the power plug is removed.
- Connect and fasten both ends of the signal cable to your PC host and LCD display respectively.
- If your LCD display has built-in speakers, connect the audio cable attached to the display from the sound card output of your PC to the audio input on the back of your LCD display.
- Connect the attached power cable to your LCD display.
- Plug the power cable into the receptacle.
- Turn on the power supplies of your PC and LCD display.
- Power Cable
- Audio Cable
- DVI Signal Cable (Optional)
- **** D-Sub Signal Cable
Adjustment of display
Key Definition
1
| | Power Source| Power On/Off
Green indication: Power is on and normal
Orange indication: Sleep status in the energy-saving mode Colorless indication: Power off
---|---|---|---
2| Menu| OSD Menu| Press this button to enter OSD. Press it again to exit OSD.
3| >| Plus| Press this button for selection or adjustment when OSD is started.
Press this button and click < and > to adjust the volume when
OSD is not started (for the model with speakers only)
4| <| Minus
5| Auto| Automatic Adjustment| Press this button to exit the manual when OSD
is started. Press this button for the display to optimize the position, phase,
and clock pulse automatically when OSD is not started.
6| Speaker| (For the model with speakers)|
FREQUENTLY ASKED QUESTIONS
How do I adjust the angle on my Acer LCD monitor?
The best way to do this is to have one hand on the upper bezel and one on the bottom. Push back on the top edge as you pull forward on the bottom, to tilt it back. Be careful not to press on the screen itself as these can break from too much pressure on the LCD panel.
How do I turn on my Acer LCD monitor?
Press the power button below the screen of the monitor. If the monitor is working properly, the light on the power button should turn on, as should the monitor.
What is a good viewing angle for LCD monitor?
When the display is viewed from 25 degrees above the vertical, it will be at its maximum contrast and best look. If the viewer moves their eyes further above the display by an additional 30 degrees, they will see a contrast reduction, but the display will still be readable.
How to use LCD as a monitor?
If you want to use your TV as a computer monitor, you will need to connect them using an HDMI or DP cable. First, make sure both devices have HDMI and DP ports. Once you have connected the cables, switch your TV to the right input source. Also, match the resolution of your PC to that of your TV.
Why is my Acer monitor not working?
Make sure the outlet you are using is not powered by a switch. After plugging the monitor into another power source, check to see if there are any power lights that show. Reset the power to the monitor by removing all power from it. Then press and hold the power button for 30 seconds.
What are the best Acer monitor settings for eyes?
During the daylight hours, it’s best to keep your monitor relatively cool with a default color temperature of 6,500K. At night, the color temperature should be warmer, and around 3,400K. You can adjust your monitor’s settings manually, or you can let f. lux make the changes for you.
Is LCD screen analog or digital?
LCDs are available in analog-only, digital/analog hybrid, and digital-only interfaces. Using an analog interface requires converting the video signal from digital to analog inside the PC and then from analog to digital inside the monitor, which reduces image quality, particularly at higher resolutions.
What type of monitor is LCD?
A liquid-crystal display (LCD) is a flat-panel display or other electronically modulated optical device that uses the light-modulating properties of liquid crystals combined with polarizers. Liquid crystals do not emit light directly but instead, use a backlight or reflector to produce images in color or monochrome.
Are LCD monitors good?
Picture quality. Factors such as resolution, color accuracy, brightness, contrast, and viewing angle affect the picture quality in LED and LCDs. It is important to note that LCD monitors produce good-quality images, though not as great as LEDs.
Which type of LCD monitor offers the best color?
The best monitors for color grading use IPS LED technology for their panels. IPS stands for In-Plane Switching and monitors using this tech have the best color and viewing angles compared to those with other types of LED panels.
Is LCD display strong?
Reliable – LCD technology has been around for a while, and the technology is well into the refinement stage of development. Great Viewing Angles – Most high-quality Phone LCD displays use IPS technology to offer 178 degrees of view without any color shifting or color distortion.
What is the Acer AL1916W?
The Acer AL1916W is a 19-inch widescreen LCD monitor.
What is the resolution of the Acer AL1916W?
The resolution of the Acer AL1916W is 1440 x 900 pixels.
What is the aspect ratio of the Acer AL1916W?
The aspect ratio of the Acer AL1916W is 16:10.
What is the refresh rate of the Acer AL1916W?
The refresh rate of the Acer AL1916W is 60 Hz.
What is the response time of the Acer AL1916W?
The response time of the Acer AL1916W is 5 ms.
What inputs does the Acer AL1916W have?
The Acer AL1916W has VGA and DVI inputs.
DOWNLOAD THE PDF LINK:Acer AL1916W 19-Inches Widescreen LCD Monitor Quick Start Guide