EXW B0BL7BTSDV 3 In 1 Magnetic Wireless Charger User Manual

EXW B0BL7BTSDV 3 In 1 Magnetic Wireless Charger

Product Information

• The device complies with part 15 of the FCC Rules.
• Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
• The equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Product Usage Instructions

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• To reduce the risk of interference, you can:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• If you need assistance, consult the dealer or an experienced radio/TV technician for help.

Overview

Product Parameter

• Product name 3 in 1 magnetic wireless charger
• Material ABS+pu
• Interface USB-C
• Input 9V-2A, 12-2A
• mobile phone output 5W/7.5W/10W/15W
• iwatch output 2.5W
• AirPods 3W
• Unfold size: 31.581cm folding size: 983cm
• Compatibility: support mobile phones, airpods and iwatch that comply with the Qi standard.

Steps for usage

1. The device is connected to the power supply through the charging cable, and then it can be powered on.
2. When charging the mobile phone, place the mobile flat in the mobile phone charging area to start charging the mobile phone.
3. After fully charging, simply take off the phone, during the charging process, if you need to terminate the charging, take it directly.
4. When charging the Apple watch,place the watch flat in the charging area to start charging the watch.After fully charged, directly remove the iwatch. During the charging process, if you need to terminate the charging, remove the watch directly.
5. When charging the Airpods. place the airpods flat in the charging area to start charging.
6. After fully charged simplv remove the airpods.During the charging process if you need to terminate the charging, remove it directly.

Important Notes

1. Please put the phone/watch/earphone at the center of charge area. (as picture shows)
2. The watch has temperature control. When the temperature reaches 104 F.it will stop charging automatically. If the temperature is normal, it will continue to charge.
3. No metal or magnetic objects around 6cm of the back center of the phone during charging.
4. The lower temperature, the faster the charging speed. The charging speed is faster in winter than in summer.
5. Please don’t charge in high temperatures and humid environments to avoid damage of circuit.
6. It is recommended to use QC/PD certified adapters, advise to use 24W power adapter.
7. This charger only supports iP 12/13/14 series with a magnetic wireless charger function.
8. This charger is only compatible with standard iP12/13/14 series case, Third part magnet accessories may not be compatible with the charger.

Packing accessories

• 3 in 1 wireless charging x 1
• USB-C Charging cable x 1
• Packing box x 1
• Packing box x 1

The content of this manual and product specifications are subject to change without notice.

FCC STATEMENT

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>