celebrate SZ22WMA11031355E Bunny Wireless Speaker User Manual
- June 11, 2024
- celebrate
Table of Contents
celebrate SZ22WMA11031355E Bunny Wireless Speaker
Product Information
- Product Name: Bunny Wireless Speaker
- Model Number: FSG11031355E
- FCC ID: 2AYNN-FSG031355E
- Bluetooth Version: 5.3
- Distance Range: 32.8ft (10m)
- Support Mode: BDR, EDR
- Standby Time: Up to 100 Hours
- Play Time: 2-3 Hours*
- Charging Time: about 2 Hours*
Depending on usage
Product Usage Instructions
- To turn on or off the speaker, long press the Power On/Off Button (1).
- To pick up and hang up phone calls, short press the Power On/Off Button (1). Press twice to redial the last call.
- To play or pause music, short press the Power On/Off Button (1) once.
- The Micro USB Charging Port (2) is used for charging the speaker. It is recommended to use the 5V/1A AC adapter with this device. If you do not use the recommended adapter, charging may be unavailable or charging time may differ.
- The Pairing Indicator Light (3) will blink when the speaker is in pairing mode.
- The Charging Indicator Light (4) will light up when the speaker is charging and turn off when fully charged.
It is important to note that the equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. To avoid fire or electric shock, do not open the unit and contact qualified personnel only.
When cleaning the unit, use a soft, dry cloth. If surfaces are extremely
dirty, use a soft cloth lightly moistened with a mild detergent solution. Do
not use strong solvents such as alcohol, benzene, or thinner as these might
damage the surface of the unit.
Do not use volatile liquids such as insecticide spray near the unit. Wiping
with strong pressure may damage the surface. Do not leave rubber or plastic
products in contact with the unit for a long period of time.
It is recommended not to place the unit near heating appliances or subject it to direct sunlight, moisture, or mechanical shock. Do not place the unit over the vehicle’s airbag as it may result in injury. Before using in the car, fix the unit. Do not use the handsfree function while driving a car.
Do not leave the unit on an unstable place such as high shelves.
It may fall down because of the vibration of the sound. Do not use high
voltage products around this product (ex. Electrical swatter) as it may
malfunction due to electrical shock. When using this product in environments
of low humidity, it may cause static electricity. It is recommended to use
this product after touching any metal object which conducts electricity.
For safety marking information including product identification and supply ratings, please refer to the main label on the bottom or the other surface of the product.
FOR SMARTPHONES, TABLETS AND OTHER
BLUETOOTH MEDIA DEVICES
Item model#: FSG11031355E
FCC ID: 2AYNN-FSG031355E
Includes
- Wireless Speaker
- USB Charging
- Cable & Manual
Product Overview
- Power On/Off Button
- Micro USB Charging Port
- Pairing Indicator Light
- Charging Indicator Light
Features
- Bluetooth handsfree audio
- Connection with most Bluetooth-enabled devices (mobile phones, tablets, etc.)
- Built-in rechargeable lithium battery 300mAh
- Micro USB power cable
- Ideal for traveling, easy installation, excellent sound quality
Keys
-
Power
Long press 1 Power
On/Off Button to turn on or off speaker -
Phone
Short press 1 Power
On/Off Button to pick up and hang up phone calls. Press twice to redial last call -
Play/Pause
Short press the 1 Power On/Off Button once to play or pause music
Pairing Your Device
- Turn on your device and activate Bluetooth function, and blue LED light flashes.
- Search for Bluetooth devices. Select “Bunny Speaker”.
- Automatically connect by selecting Bluetooth name without password. Blue LED light goes out.
Charging
The Wireless Speaker is powered by an integrated rechargeable lithium battery.
Charge as follows:
- Insert the charging cable into the DC 5V socket on the unit. Connect the USB plug into a PC or 5V/1A AC/DC adaptor. When the battery is charging, the LED indicator turns red.
- When the indcator LED light goes out, the speaker is fully charged.
Safety Instructions
- Keep the device away from heat, direct sunlight and sharp edges
- To avoid short circuit, do not insert any metal object into the device
- To avoid static charge, do not use in an extremely dry climate
- Do not repair the unit yourself. Contact an authorized specialist
- Do not charge in the shower or other wet environments
- Only charge when unit is dry
- Do not submerge under water
Technical Specification
- Bluetooth Version 5.3
- Distance Range: 32.8ft (10m)
- Support Mode: BDR, EDR
- Standby Time: Up to 100 Hours
- Play Time: 2-3 Hours*
- Charging Time: about 2 Hours*
Depending On Usage
FCC Notice
This equipment has been tested and found to comply withthe limits for a Class
B digital device,pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC
Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
Instructions
- It is recommended that you use the 5V/1A AC adapter with this device. If you do not use the recommended adapter, charging is unavailable or charging time may differ.
- To avoid fire or electric shock, do not open the unit, contact to qualified personnel only.
- Do not leave the unit in a place near the heating appliances or subject to direct sunlight, moisture, or mechanical shock.
- To clean the unit, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzene, or thinner, as these might damage the surface of the unit.
- Do not use volatile liquids such as insecticide spray near the unit. Wiping with strong pressure may damage the surface. Do not leave rubber or plastic products in contact with the unit for a long period of time.
- Do not place the unit over the vehicle’s air bag. When the air bag deploys, it may result in injury. Before using in the car, fix the unit.
- Do not use the handsfree function during driving a car.
- Do not leave the unit on an unstable place such as high shelves. It may fall down because of the vibration of the sound.
- Do not use high voltage products around this product (ex. Electrical swatter). This product may malfunction due to electrical shock.
CAUTION when using this product in environments of low humidity.
- It may cause static electricity in environments of low humidity.
- It is recommended to use this product after touching any metal object which conducts electricity.
NOTICE: For safety marking information including product identification
and supply ratings,please refer to the main label on the bottom or the other
surface of the product.
All rights reserved. Trademarks and registered trademarks are the property of
their respective owners.
This proprietary artwork and concepts are copyright designs of Fourstar Group Inc. 2022. No part of this artwork may be reproduced or transmitted in any form without express written consent.
© Fourstar Group Inc. All Rights Reserved.
Please contact Account Executive for availability of design before initiating project
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>