FOCAL P60 Limited Edition User Manual
- June 9, 2024
- FOCAL
Table of Contents
P60 LIMITED EDITION
User Manual
P60 Limited Edition
|
---|---
|
|
Specifications
Tweeter Be
Cone | Beryllium inverted dome |
---|---|
Nominal power | 15W |
Maximum power | 100W |
Sensitivity (2.83V/1m) | 93.5dB |
Nominal impedance | 4 Ω |
Frequency response | 2.5kHz – 40kHz |
Voice-coil diameter | 3/4 (20mm) |
Depth | 1″ (24.15mm) |
Cone diameter | 1 |
Magnet | 8-May |
Net weight | (42mm) Neodymium 0.11lbs (50g) |
Medium 4″
Cone | “W” composite sandwich |
---|---|
Nominal power | 50W |
Maximum power | 100W |
Sensitivity (2.83V/1m) | 87dB |
Nominal impedance | 4 Ω |
Frequency response | 150Hz – 2,500Hz |
Surround | Butyl |
Voice-coil diameter | 1″ (25mm) |
Depth | 13/8 ” (33.8mm) |
Cone diameter | 4” (10cm) |
Magnet | Neodymium |
Net weight | 0.55lbs (250g) |
Woofer 8″
Cone | W composite sandwich |
---|---|
Nominal power | 100W |
Maximum power | 200W |
Sensitivity (2.83V/1m) | 91dB |
Nominal impedance | 4 Ω |
Frequency response | 35Hz – 500Hz |
Surround | Butyl |
Voice-coil diameter | 15/8 ” (40mm) |
Depth | 2″ (50mm) |
Cone diameter | 8” (20cm) |
Magnet | Neodymium |
Net weight | 2.65lbs (1200g) |
READ FIRST!
IMPORTANT SAFETY INSTRUCTIONS!
Warning symbol. This symbol is designed to warn the user of the presence of important instructions mentioned and relating to the handling, operation and maintenance of the device.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all the instructions.
- Do not use this device near water.
- After removing the product from its packaging, keep the packaging out of the reach of children. It poses a suffocation risk.
- Never use chemical products or abrasive detergents to clean the device. Clean with a dry cloth only.
- Do not obstruct ventilation openings, as this may alter the sound quality of the device.
- During storage, the device should not be exposed to temperatures below 20°C or above 80°C. The operating temperature range for the device is between -10°C and 50°C.
- If the product emits smoke or an unusual smell, immediately turn off the power supply (turn off the ignition and remove the key) and stop using it. Contact your retailer as soon as possible.
- Do not turn on any function likely to distract you when driving. Functions or settings that require prolonged attention should only be used when the vehicle is at a complete stop. There is a risk of accident.
- Do not listen to the loudspeakers at a high volume, so that you can hear external noise when driving.
- If cords or connectors are supplied, use them properly as described in the user manual without replacing them or modifying them.
- If the kit or connector includes a fuse, it must only be replaced by a fuse of the same rating.
- Do not attempt to repair this device yourself. Opening the device may expose you to dangerous voltages or other risks.
- All maintenance tasks should be performed by a qualified professional. Maintenance is required in case of any kind of damage to the device (spillages or objects inserted into the device, exposure to rain, if the device malfunctions or is dropped, etc.).
- When replacement components are needed, make sure that the maintenance technician uses the components recommended by the manufacturer or components with exactly the same technical features as the original product. Using non-compliant components could cause fires, electric shocks or other risks.
- After any maintenance or repair work on the device, ask the maintenance technician to test it to check that it is working safely.
- If a subwoofer is installed in the vehicle, it is essential to secure it by attaching it solidly. We recommend attaching the subwoofer to the floor or chassis of the vehicle for safety. If it is not properly secured, it could become a projectile in the event of an accident. This is even more important if the subwoofer is installed in a hatchback, a station wagon, a utility vehicle or a van.
- Some users who are not self-sufficient enough to use the product on their own without danger. In particular, children under 14 or people with some types of disabilities must be supervised and/or accompanied when using the device.
- To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive volumes (over 85dB) for more than one hour can cause irreparable damage to your hearing.
**** The methods of installing and mounting loudspeakers to any surface (bracket, ground anchoring, etc.) depend on the conditions and standards of installation, refurbishment, safety and cabling in force and applicable to the surfaces and/or brackets involved. In addition, the products may vibrate and damage the brackets onto which they are mounted. For this reason, the installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of incident, accident and/or any other result or damage of any kind related to the installation of loudspeakers.
Please validate your Focal-JM lab warranty, it is now possible to register
your product online:
www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world.
Innovation, tradition, excellence and pleasure are our values; our one and
only aim is to bring you a sound that is rich, pure and true. To get the most
out of your product, we recommend that you read the instructions in this
booklet, then store it in a safe place to refer to in the future if needed.
Important recommendations
These speaker drivers have been designed to be fitted in the factory location.
Check that there is sufficient space between the speaker driver and the
protective grille.
- Keep the speaker drivers clear of any metal shavings and dust particles.
- Clean thoroughly before fitting the speaker drivers.
- Ensure that there are no objects positioned across the grille, as this could damage the speaker drivers.
Pre-installation wiring
You will only be able to begin fitting the speaker drivers once they are
connected using the terminal block on the speaker drivers (fig. 8).
Installation
Please use suitable screws to avoid damaging the sub, vehicle trim or any of
its other components (fig. 15, 16).
Product positioning
The speaker drivers have been designed to deliver the most faithful sound
reproduction for any style of music. Nonetheless, a few simple rules should be
followed to optimise their performance and to guarantee good tonal balance and
a realistic sound image. We recommend placing the speaker drivers from the kit
in the dedicated locations (fig. 2).
Packaging
The packaging containing the P60 Limited Edition kit is designed to be reused.
After installing the speaker drivers in the vehicle, the sections initially
containing the speaker drivers can be removed to convert the packaging into a
piece of luggage (see fig. 26).
**** This piece of luggage is not suitable to be transported by plane. Focal
is therefore not liable in any capacity whatsoever in the event of incident,
accident and/or any other result or damage of any kind related to the
transportation of the piece of luggage by plane.
For the purposes of improvement or to take into account any legal or
regulatory changes, FOCAL-JM Lab reserves the right to modify the technical
specifications of its products without prior notice. Where applicable, the
images shown are intended for illustration purposes only, and may differ
slightly from the product sold.
SPECIAL PRECAUTIONS
Maintenance
To look after the P60 Limited Edition speaker drivers, simply dust using a dry
cloth. If the grille is marked, use a damp duster. Never use solvents,
detergents, alcohol or corrosive products, scrapers or scouring utensils to
clean the surface of the speaker drivers.
Running-in period
The speaker drivers used are complex mechanical components that require a
running-in period to operate at their best. This running-in period varies
depending on the conditions in question and may take several weeks. To reduce
this time, we recommend operating your speaker drivers for about 20 hours at a
moderate volume. Once the speaker drivers’ characteristics have fully
stabilized, you will be able to enjoy the performance of your products to the
full.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by the official Focal
distributor in your country. Your distributor can provide all details
concerning the conditions of warranty. Warranty cover extends at least to that
granted by the legal warranty in force in the country where the original
purchase invoice was issued.
Scan QR code for information on packaging disposal![FOCAL P60 Limited Edition
- qr code](https://manuals.plus/wp-content/uploads/2023/04/FOCAL-P60-Limited-
Edition-qr-code.jpg)https://www.focal.com/regulatory-product-information
Focal-JMlab® – BP 374 – 108, rue de l’Avenir – 42353 La Talaudière cedex – France – www.focal.com
Tel. (+33) 04 77 43 57 00 – Fax (+33) 04 77 43 57 04 – SCCG – 19/04/2023 – v1
References
- Top-of-the-range speakers and hi-fi equipment | Focal
- Extension de garantie | Focal
- Se connecter à focal-naim
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>