sinope TH1500WF Smart Double Pole Thermostat Installation Guide

sinope TH1500WF Smart Double Pole Thermostat

Product Information Smart Double Pole Thermostat

The TH1500WF is a smart double pole thermostat that can be controlled through the Neviweb app. It features load/line wires located on the back of the thermostat that can be connected using the provided connectors. The thermostat must be installed by a certified electrician and comply with national and local electrical codes and regulations. The installation process requires powering off the heating system’s breakers at the main electrical panel.

Technical Specifications

• Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod, Apple TV, or iPad set up as a home hub.
• It is recommended to update to the latest software and operating system.
• The product comes with a 3-year limited warranty.
• Operating voltage : 120/208/240/277Vac, 50/60 Hz
• Maximum load:
  • 1800 W @ 120 V / 15 A
  • 3120 W @ 208 V / 15 A
  • 3600 W @ 240 V / 15 A
  • 4155 W @ 277 V / 15 A
• Setpoint range : 5 °C to 30 °C (41 °F to 86 °F)
• Display range : 0 °C to 50 °C (32 °F to 99 °F)
• Resolution : ± 0.5 °C (± 1 °F)
• Storage : -20 °C to 50 °C (-4 °F to 122 °F)
• Operation : 0 °C to 50 °C (32 °F to 122 °F)
• Protocol : Wi-Fi
• Standard : IEEE 802.11 b/g/n
• Frequency : 2.4 GHz

Controlling this HomeKit-enabled accessory automatically and away from home requires a HomePod. Apple TV. or iPad set up as a home hub. lt is recommended that you update to the latest software and operating system. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. HomeKit is a trademark of Apple Inc. Neviweb® is a registered trademark of Sinopé Technologies Inc. in Canada and the United States. Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Google Play and the Google Play logo are trademarks of Google Inc. The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®

Product Usage Instructions

To install the thermostat, follow these steps:

1. Unlock and lift the thermostat cover.
2. Connect the load/line wires located on the back of the thermostat using the provided connectors. Firmly tighten the wire connectors to ensure a secure connection.
3. Use screws to secure the thermostat to the electrical box.
4. Replace and lock the cover.
5. Power up the thermostat.

To modify the device’s settings, follow these steps:

• Access the menu by getting the setpoint to its minimum and holding the button for 10 seconds.
• Press the + or – button to change the setting.
• Press the + and – buttons simultaneously to save and go to the next parameter.
• Continue to press until the end of the list to exit the menu.

To add the thermostat to the Neviweb app, follow these steps:

1. Download the Neviweb app for iOS or Android and create an account.
2. Select “Add Device” and then select “Thermostats”.
3. Select your thermostat model: TH1500WF.
4. Follow the steps of the installation wizard.

To disconnect the thermostat from the Wi-Fi router or the Neviweb app, press the + and – buttons simultaneously for 10 seconds. The symbol will disappear from the display. To remove the thermostat from Neviweb, press “Delete” in the thermostat’s settings.

Warnings
The installation of this thermostat must be performed by a certified electrician and comply with the national and local electrical codes and regulations Before starting the installation of your new thermostat. make sure that the breakers for your heating system are off at the main electrical panel

INSTALL YOUR THERMOSTAT

1. Unlock and lift the thermostat cover
2. Use the provided connectors to connect the load/line wires located on the back of the thermostat. Make sure to firmly tighten the wire connectors for a secure connection. A loose connection can be a fire hazard.
3. Use the screws to secure the thermostat to the electrical box.
4. Replace the cover and lock.
5. Power up the thermostat.

USER SETTINGS

Ali of the thermostat’s settings can be set through the Neviweb app. However. if you have not created your account and wish to change the temperature format, you need to:

Get the setpoint to its minimum and hold the button for 10 seconds to access the menu. Press the or button to change the setting, Press the and buttons simultaneously to save and go to the next parameter. Continue to press until the end of the list to exit the menu

SETTINGS WHICH CAN BE MODIFIED ON THE DEVICE DIRECTLY

0 W to 4155 W

|
 | Temp| Temperature format

°C or °F (Default: °C)

|
 | Min| Minimum setpoint

5 °C to 30 °C (Default: 5 °C)

|
4| Max| Maximum setpoint

5 °C to 30 °C (Default: 30 °C)

|

Load power
Reading of the load power connected to the thermostat, featured in watts.

ADD YOUR THERMOSTAT TO THE NEVIWEB APP

1. If you do not have an account yet, download the Neviweb app for iOS or Android to create an account and add your device.
2. Tap the , then select “Add Device”. Select “Thermostats”, then tap on your thermostat model: TH1500WF.
3. Follow the steps of the Installation Wizard.

DISCONNECT YOUR THERMOSTAT FROM THE WI-FI ROUTER OR THE NEVIWEB APP

To disconnect your thermostat from the Wi-Fi router, press the and buttons simultaneously for 10 seconds. The symbol will disappear from the display. To remove your thermostat from Neviweb, press “Delete” in the thermostat’s settings

FCC

Transmitter Module IC : 21098-ESPWROOM32 / FCC ID: 2AC7Z-ESPWROOM32

This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device does not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

3-year limited warranty

SINOPÉ TECHNOLOGIES INC. warrants the components of their products against defects in material and workmanship for a 3 year period from the date of purchase, under normal use and service, when proof of purchase of such is provided to the manufacturer. This warranty does not cover any transportation costs that may be incurred by the consumer. Nor does it cover a product subjected to misuse or accidental damage. The obligation of SINOPÉ TECHNOLOGIES INC., under the terms of this warranty, will be to supply a new unit and this releases the manufacturer from paying the installation costs or other secondary charges linked to replacing the unit or the components.

For more information, visit our website www.sinopetech.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>