Huikun Technology CM77 Tablet PC User Manual
- June 10, 2024
- Huikun Technology
Table of Contents
User Manual
CM77 Tablet PC
| Rear Camera
---|---
| Front Camera
| 3.5mm Audio Jack
| Volume+
Volume-
| Power ON/OFF
| Reset
| TF Card
| Type-C
| Speaker
Attention
C idea tablet contain important security measures and the correct use of the product information, in order to avoid accidents, please make sure to read the manual carefully before using the device.
When charging, please only use C idea charger to protect your device
Please don’t be in high temperature, moisture place
please don’t put the device in the car
Don’t crash or no stack on it.
Don’t invade it by other article
Keep it away from the chemical or the water drop
Keep it away from the direct sunlight or the other heating article
Keep it away from the dust
Backup the files or important information stored in it
Don’t refurbish or repair without the authorization
For those who because of damage to the product, repair or other causers of erased the memory. the company shall not be liable for any responsibility. please follow the user manual for the standardized operation to use the device
Power ON/OFF
Start or Shut the PC
Start the tablet pc
If power is off, press the “power on/off” button for continual 5 seconds
Shut the tablet pc(power off)
At any working status, press the “power on/off” button for continual 5 seconds, it will display 2 options: cancel ok
Reset
If the tablet pc “die” when working, press the “power on/off” button for continual 8 seconds. Re-start it
Unlock screen
At the screen-saving(black screen )status, press “power on/off” button shortly to siren the screen, and move the lock icon to the unlock location ,them operate again.
Reset
Factory settings
If the device is infected with computer virus, or the applications by the third party. please prick the “reset” by using a needle and wait for the original factory settings.
First use
Battery management and charge
Before first using, please make sure the battery is charged 100% completely. please use the factory equipped adaptor and USB interface for tablet charging connecting. for the second times charging, please keep the charging term is about 6 hours .then 4 hours for each time.
Remark
The tablet must be charged once every month during storage, otherwise the battery will discharge.
Device should be in standby status if for no long time using. because with device and screen consumption, it may cause longer charging term and damage the device.
OTG
It is the abbreviation of on-the-go, it allows the data-transfering and data- sharing between this device and other one without“host”.
1,connect this device with other one for example flash memory through OTG converter
2,press “file manage ”after this device display “external devices in”, then press the icon all the filed will be listed.
Remark:
The original OTG converter is recommended. If other USB storage is found incompatible, please download the fire ware from the authorized homepage.
When OTG being used, make sure the sufficient battery power insides this device. if other USB storage has the independent power supply, please turn on the power.
OTG is compatible with the external keyboard, mouse and other device.
Connecting with the PC
Connect this device with PC by USB cable, then it will work as the mobile storage for PC(remark:all the files insides the internal storage of this device is read only by PC.it can run other option like the WIFI internet etc. turn off USB storage ,it can read the files insides itself again.
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.