Kmart 43186150 Star Light Projector Instruction Manual
- June 4, 2024
- Kmart
Table of Contents
Star Light Projector
Instruction Manual
Feature of Main Body
How to connect and use
- Power on the Star Light Projector by using a 5V USB cable and a 5V/2A adapter (Not included).
- Toggling the ON/OFF button to the middle of the main body.
- Turn on your mobile phone Bluetooth to search and connect #43186150#.
- Or USB port is an option for plugging in a U disk to play music.
- Change LED lighting modes by toggling the “LED” button on the main body.
The function of Remote Control
Remote button for Playing Music
-
Press this button to turn on/off the audio light control feature.
-
Press this button to change the music mode:
Bluetooth mode&USB playing mode. -
Press this button to make the music silent.
-
Press this button to pause/play the music.
-
Press these buttons to change the previous song and the next song.
-
Press these buttons to volume down and volume up.
Remote button about Displaying Light
- Press this button to turn on/off all the lights.
- Press these buttons to change the colors.
- Press this button to turn on the LED light.
- Press this button to make the lights automatically change color in turn.
- Press this button to turn on the laser.
- Press this button to make the led lights ashing.
- Press this button to make the starry elect rotate.
1)Firstly press to start rotating; 2)Secondly press fast rotating
- Thirdly press stop rotating;
4)Fourthly press resume rotating.
- Press these buttons to decrease/ increase the brightness.
Timer Setting
Pressing timing buttons to set up a timer to turn off the light.
Notes
- When you press the timing button , the light will flash one time which means the timer setting up is successful. Then the light will automatically turn off per the timer. Please turn on the night light when you set up timing.
- The timer setting is used for light only and doesn’t work with music.
How to change the remote battery
- Remove the screw on the back of the remote.
- Push the small part per to the arrow , and pull the battery cover at the same time.
WARNING:
Button cell Batteries are Hazardous (new or used). Keep away from Children.
Button Cell Batteries can cause severe or fatal injuries in 2 hours or less if
they are swallowed or placed inside any part of the body. If you suspect your
child has swallowed or inserted a button cell battery, call the 24-hour poison
information center in Australia on 131126 or in New Zealand at 0800 764 766 or
contact your country’s emergency dept. Used batteries must be disposed of in
the garbage or a battery recycle facility.
Tips
- Please read this instruction carefully before using it to get a better experience. Please contact us if you have any questions.
- The product is designed for indoor demonstration, please do not use it in a wet environment for a long time. Waterproofing measures are required if you have to use it outdoors.
- Please do not look directly at this product for too long, so as not to hurt the eyes.
- Do not aim the laser light directly into the eyes
- Do not allow children to play with this product
Technical Parameters
LED Power | 2*3W RGBW LED |
---|---|
Input | DC5V/2A |
Rating Power | 9W |
Tips
- Please read this instruction carefully before using it to get a better experience. Please contact us if you have any questions.
- The product is designed for indoor demonstration, please do not use it in a wet environment for a long time. Waterproofing measures are required if you have to use it outdoors.
- Please do not look directly at this product for too long, so as not to hurt the eyes.
- Please keep or use the product under normal temperature.
- Do not throw this product casually or put it on fire to avoid danger.
- Do not disassemble or repair the product by yourself.
- Do not use harsh chemicals or strong detergents to clean the product.
WARNING:
THIS PRODUCT PRODUCES FLASH THAT MAY TRIGGER EPILEPSY IN SENSITISED
INDIVIDUALS
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>