CALLMATE W18 Wireless Charger Instruction Manual

CALLMATE W18 Wireless Charger

Product Information

• Name: Wireless Charger
• Model: w18
• Product Size: 12477.2128mm
• Input: 12V-1.5A / 9V-2A 9V-2.22A /12V-1.67A
• Power Supply Port: Type C
• Phone Charging: 15W
• Maxium Output Power: Type-C Charging 3W, Lightning Charging 5W

Product Usage Instructions

1. Connect the Type C power supply port of the wireless charger to a power source.
2. Place your compatible device on the center of the charging pad.
3. The LED indicator will light up to signify that your device is charging.
4. Remove your device once it is fully charged.
5. Avoid using the wireless charger in hot and humid conditions.
6. Keep the wireless charger at a minimum distance of 20cm between the radiator and your body to comply with FCC radiation exposure limits.

Note: This wireless charger complies with part 15 of the FCC Rules and any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The wireless charger must accept any interference received, including interference that may cause undesired operation.

Charging the Bluetooth headset

Insert the plug to the Bluetooth headset charging compartment (Attention: If a thick silicone protective cover is provided on the headset charging compartment, it may cause poor contact and failure to charge, please remove the silicone protective cover before charging.)

INTRODUCTION

1. Wireless charging area for mobile phone
2. Charging of AirPods/AirPods Pro.
3. TYPE-C Charging
4. Operating indicator light.
5. TYPE-C Female
6. Cellphone stand using for charging in horizonal direction

Charging for W18

This product needs to be powered with an adapter with a power of 12V-1.5A / 9V-2A / 9V-2.22A / 12V-1.67A and connected to the type-c port. When the bottom power indicator is on, it means that the power supply is connected.

Operating indicator

• The blue working indicator is always on during the charging process of the mobilephone;
• The green working indicator is on when it’s been fully charged;
• The red working indicator is always on when standby by;
• The red working indicator light will be flashing when there with with errors.

OPERATION INSTRUCTIONS

Charging for cellphone

• In vertical direction: Support the maximum phone thickness. Put the mobile phone upright in the wireless charging area of mobile phone, and you can see the “Charging indicator” on the display of the mobile phone, showing that it is being charged properly
• In horizontal direction:Put the fold-able stand down,put cellphone in horizontal direction on this stand,and you can see the “Charging indicator” on the display of the mobile phone, showing that it is being charged properly

SPECIFICATIONS

MATTERS NEEDING ATTENTION

• When charging the device, do not use a protective cover with a thickness of more than 5mm, and do not use a protective cover with a metal sheet.
• Do not put metal foreign objects in the charging area.
• When charging, please aim the device at the center of the charging area.
• Please use the adapter we included or another adapter that can achieve at least 18W output.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>