Polux VIBORG M Solar Lantern Instruction Manual
- June 4, 2024
- POLUX
Table of Contents
VIBORG M Solar Lantern
Instruction Manual
LATARENKI SOLAR
INTENDED USE / APPLICATION
Product designed for use in households and for other similar general
applications.
MOUNTING
Technical changes reserved. Read the manual before mounting. Mounting should
be performed by an appropriately qualified person. Any activities to be done
with disconnected power supply. Exercise particular caution. Mounting diagram:
see pictures. Check for proper mechanical fastening and connection to
electrical power prior to first use. The product requires preparation before
operating.
FUNCTIONAL CHARACTERISTICS
The lamp is equipped with built-in solar panels. Fixtures turn on automatically after dark.
USAGE GUIDELINES / MAINTENANCE
Clean only with soft and dry cloths. Do not use chemical detergents. Do not
cover the product. Ensure free air access. Battery replacement: see pictures.
The product must not be used in an unfavourable environment, e.g. dust,
moisture, water, vibrations, etc. Product with a nonreplaceable light source
of the LED type. The product cannot be fixed if the light source becomes
damaged. It’s forbidden to use the product with a damaged protective cover.
ATTENTION! Do not look directly at the LED light beam. Product to be used
in a moderate climate. Using the product without the shield is forbidden. Non-
demountable product. Not suitable for independent repairs. The construction of
the product offers no resistance to specific conditions, e.g. due to the
presence of defrosting substances and salt atmosphere; oils, lubricants, and
solvents.
Prevent flooding of the device. In case of failure, the device should be
replaced with a new one. Before first use, the solar lamp must be exposed to
direct sunlight for a few days in order to charge the accumulators. Make sure
that the solar panel is not covered/shaded/overshadowed while installing the
lamp outside in order to ensure the optimal charging of the accumulators. Keep
the solar panel and the chassis of the device clean in order to ensure the
optimal charging of the accumulators during the day. Clean regularly If after
some time the lamp stops working, try changing the accumulators. Use
protective gloves.
ENVIRONMENTAL PROTECTION *
Segregation of post-packaging waste is recommended. This labelling indicates the requirement to selectively collect waste electronic and electrical equipment. Products labelled in this way must not be disposed of in the same way as other waste under the threat of a fine. These products may be harmful to the natural environment and health and require a special form of recycling/neutralising. Keep your environment clean. Used batteries and/or accumulators need to be treated as separate waste and placed in an individual container. Used batteries and/or accumulators should be returned to a collection facility for waste batteries/ accumulators. Information on collection centres is provided by local authorities or sellers of such goods. Used items can also be returned to the seller when a new product is purchased, in quantity no larger than the purchased item of the same type. The above rules regard the EU area. In the case of other countries, regulations in force in a given country must be applied. Contacting the distributor of our products in a given area is recommended.
COMMENTS / GUIDELINES
Failure to follow these instructions may result in e.g. fire, burns,
electrical shock, physical injury and other material and non-material damage.
Sanico Electronics Polska Sp. z o.o.
ul. Okólna 45, 05-270 Marki
e-mail: sanico@sanico.com.pl
www.sanico.com.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>