Acer XN253QX LCD Monitor User Guide
- June 9, 2024
- Acer
Table of Contents
Acer XN253QX LCD Monitor
Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
- To clean the LCD monitor screen:
- Turn off the LCD monitor and unplug the power cord.
- Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
- Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
- Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
- Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
- Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD monitor outside this range may result in permanent damage.
- Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
- Monitor-to-PC signal cable is frayed or damaged.
- Liquid spills onto the LCD monitor or the monitor is exposed to rain.
- The LCD monitor or case is damaged.
- In order to prevent damage to the LCD panel, do not place the monitor face down on a surface.
Connecting your monitor to a computer
-
Turn off your computer and unplug your computer’s power cord.
-
Connect the signal cable to the HDMI (optional) and /or DP (optional) input socket of the monitor, and the HDMI (optional) and /or DP (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector.
-
Connect the USB Cable(Optional)
Connect the USB 3.0 cable to port for fast charge.
Connect the USB 3.0 cable to port. -
Insert the monitor power cable into the power port at the back of the monitor.
-
Plug the power cords of your computer and your monitor into a nearby electrical outlet.
Note: Audio output is only for audio output model. Please check user manual for more instruction.
External controls
-
Power button
Turns the monitor on/off. Blue indicates power on. Amber indicates standby/ power saving mode. -
Function key
- Press to view Main page. Press again to enter hotkey1 function.
- When the Function Menu is active, press this key to view the basic information for your monitor and current input or reset the custom color settings to the factory defaults.
-
Function key
- Press to view Main page. Press again to enter hotkey2 function.
- When the Function Menu is active, press this button to select select scenario mode or game mode .
-
Function key
- Press to view Main page. Press again to enter Input select function.
- When the Function Menu is active, this button will quit the OSD.
-
Function key
-
Press to view Main page. Press again to enter next function in the Function Menu.
-
The single toggle button on the backside of the Display bezel operates like a joystick. To move the cursor, simply toggle the button in four directions. Press the button to select desired option. Red indicates operable. Grey indicates inoperable.
G-SYNC & the 3D Experience
3D visual effects require 3D-compatible software, n Vidia® 3D Vision TM
glasses kit and a compatible n Vidia® 3D graphics card.
G-SYNC requires an NVIDIA GeForce GTX650Ti BOOST GPU or higher. For more
information, visit the n Vidia® website:
http://www.nvidia.com/page/home.html
Note: Acer monitor is purposed for video and visual display of information
obtained from electronic devices.
Regulations and safety notices
FCC notices
This device has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This device generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this device does cause harmful interference to radio or television reception,
which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/television technician for help.
CE declaration of conformity
Hereby, Acer Inc., declares that this LCD monitor is in compliance with the
essential requirements and other relevant provisions of EMC Directive
2014/30/EU, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/EU
and Directive 2009/125/EC with regard to establishing a framework for the
setting of eco design requirements for energy-related product.
Notice: Shielded cables
All connections to other computing devices must be made using shielded cables
to maintain compliance with EMC regulations.
Notice: Peripheral devices
Only peripherals (input/output devices, terminals, printers, etc.) certified
to comply with the Class B limits may be attached to this equipment. Operation
with non-certified peripherals is likely to result in interference to radio
and TV reception.
Caution
Changes or modifications not expressly approved by the manufacturer could void
the user authority, which is granted by the Federal Communications Commission,
to operate this product.
In order to prevent damage to the monitor, do not lift the monitor by its
base.
Operation conditions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Notice: Canadian users CAN ICES-3(B)/NMB-3(B)
Disposal of waste equipment by user in private household in the European
Union
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is your
responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and
electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and
ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste
equipment for recycling, please contact your local city office, your household
waste disposal service or the shop where you purchased the product.
SPECIFICATION
LCD Panel
| Driving system| TFT Color LCD
---|---|---
Size| 24.5 “W (62cm)
Pixel pitch| 0.28mm(H) x 0.28mm(V)
Brightness| 400cd/m2(Typical)
Contrast| 1,000:1(native)
Viewable angle (Typical)| 170° (H) 160° (V) (CR≥10), 176°(H), 170°(V) (CR≥5)
Response time| 1ms (G to G)
0.4 ms (G to G, Min.)
Panel Type| TN
| H-Frequency| HDMI:30-90KHz, DP:67-255KHz
V-Frequency| HDMI: 24-60Hz, DP:30-240Hz
Display Colors| 16.7M Colors
Dot Clock| 300MHz(HDMI)/350MHz(DP)
Max. Resolution| HDMI: 1920×1080 @60Hz DP: 1920×1080 @240Hz
Plug & Play| VESA DDCCI/DDC2B
Energy Efficiency Class| A
*Annual Energy Consumption(Typical)| 37 (kWh) (for HDMI-input Model)
Power consumption @200cd/m2| ON Mode| 28W(typ.)
Sleep Mode| 0.5W(typ.)
Off| 0.5W(typ.)
Input Connector
| DP (Only DP Model) HDMI (Only HDMI model)
USB Hub / USB3.0 x 4 (Only USB Hub Model)
Input Video Signal| DP signal(Only DP-Input Model) HDMI signal(Only HDMI-Input
Model)
Speakers(Typical)| 2W x 2
Audio| Audio-Output (Only Audio-Output Model)
Maximum Screen Size| Horizontal:543.7mm Vertical:302.6mm
Power Source| 100-240V~, 50/60Hz
Environmental Considerations| Operating Temp: 0° to 40°C Storage Temp: -20° to
60°C Operating Humidity: 20% to 80%
Dimensions| 558 (W) x 398~513(H) x 236(D)mm
Weight (N. W.)| 6.17kg Unit (net)
Mechanism spec
| Tilt: -5° to +25° Swivel: +/-20°
Height adjustment: 115mm Pivot: Yes
foot stand: Yes
External Controls:| Functions| Brightness
Aim point
Contrast Language
Blue Light OSD Timeout
Dark boost Transparency
Adaptive contrast Refresh rate num
Gamma Input
Color Temp Hot Key Assignment
Saturation Wide Mode
6-axis color Deep Sleep
Volume Quick Start Mode
ULMB Power-off USB charge
Over Drive Game mode
- All specifications are subject to change without notice.
Find manuals and other documents for your Acer product on the official Acer
support website.
*Annual energy consumption is calculated using the typical power consumption 4 hours per day, 365 days per year.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>