SEVEN RX-425W Wireless Optical Mouse User Manual

RX-425W                    www.sven.fi

Wireless Optical Mouse

Congratulations on your purchase of the SVEN PC mouse!

Please read the following instructions carefully before connecting, operating or adjusting this product. Besides, please keep this Manual in a safe place for future reference.

COPYRIGHT
© 2016. SVEN PTE. LTD. Version 1.0 (V 1.0).
This Manual and information contained in it are copyrighted. All rights reserved.

TRADEMARKS
All trademarks are the property of their legal holders.

NOTICE OF RESPONSIBILITY RESTRICTION
Despite the exerted efforts to make this Manual more exact, some discrepancies may occur. The information in this Manual is given on “as is” terms. The author and the publisher do not bear any liability to a person or an organization for loss or damage which has arisen from the information contained in this Manual.

Technical support is onwww.sven.fi.

User’s Manual

1. SPECIAL FEATURES

• DPI resolution switch
• Two additional navigation buttons (Forward and Back)
• Long life battery-fed operation (1 year)
• Convenient for laptop operation

2. PACKAGE CONTENTS

• Optical mouse – 1 рс
• 2.4 GHz USB nano receiver – 1 рс
• AA type battery – 1 рс
• User’s Мanual – 1 рс
• Warranty card – 1 рс

3. SYSTEM REQUIREMENTS

• Windows XP/Vista/7/8/10.
• Free USB port.

4. DESCRIPTION

(1) Scroll wheel
(2) DPI switch
(3) Forward and Back navigation buttons
(4) Optical sensor
(5) Battery compartment
(6) Nano receiver
(7) Connector USB

Fig. 1. Top view

Fig. 2. Bottom view                    3. Nano receiver

5. INSTALLATION

• Open the cover of the mouse battery compartment (5), insert one AA type battery into the battery compartment matching the polarity, and close the cover of the battery compartment (see Fig. 4).
• Connect the included nano receiver (6) to a free PC USB port (Fig. 5).
• To activate the mouse, press any button of the mouse or turn the scroll wheel. If the mouse is connected correctly, it will turn on automatically.

Improper installation of batter can result in failure of the mouse!

Battery compartment cover

1. АА type batterу
2. Battery compartment

Fig. 4. Battery installation

Fig. 5. Receiver connection

• After finishing work you can pull out the receiver (6) from the PC USB port and insert it into the mouse (Fig. 6). When using the receiver again, pull it out from the mouse and connect it to the PC USB port again.
• Do not place the receiver into a confined metal space (table drawer, box, safe), as a metal screen does not transmit radio signals.
• If the battery runs down, the mouse works in jerks. It means that the battery should be replaced with new one, as it is shown in Fig. 4.

Fig. 6. Fitting the receiver into the mouse case

Important
This device meets the highest standards of energy conservation.

6. TROUBLESHOOTING

1. Make sure that the nano receiver has been inserted into the USB port and its distance to the mouse is less than 10 m.
2. Check whether the batteries have been installed correctly.
3. Check if the batteries have run down, replace the batteries with new ones if necessary.
4. Address nearest authorized service center.

7. TECHNICAL SPECIFICATIONS

Notes:

• Technical specifications given in this table are supplemental information and cannot give occasion to claims.
• Technical specifications are subject to change without notice due to the improvement of SVEN production.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road,
№ 02-02, Singapore, 427447. Produced under the
control of Oy Sven Scandinavia Ltd. 15, Kotolah-
dentie, Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.

RX-425W

Documents / Resources

| SEVEN RX-425W Wireless Optical Mouse [pdf] User Manual
RX-425W, Wireless Optical Mouse, RX-425W Wireless Optical Mouse, Optical Mouse, Mouse
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>