FOCAL LITTORA 200 OD Series Loudspeakers User Manual
- June 9, 2024
- FOCAL
Table of Contents
FOCAL LITTORA 200 OD Series Loudspeakers User Manual
IMPORTANT SAFETY INSTRUCTIONS!
Warning symbol. This symbol is designed to warn the user of the presence of important instructions mentioned in the user manual and relating to the handling, operation and maintenance of the device.
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all the instructions.
-
After unpacking the product, ensure you do not leave the packaging within reach of children, as it poses a risk of suffocation.
-
Only clean with a dry cloth.
-
Do not obstruct ventilation openings. Follow the manufacturer’s instructions for installing the device.
-
Do not install the device close to a heat source (e.g. a cooking appliance, flame, etc.) or any other appliance (including amplifiers) that gives out heat. The device must not be exposed to temperatures above 65°C.
-
Only use accessories recommended by the manufacturer.
-
If cords or connectors are supplied, use them properly as described in the user manual without substituting them or modifying them.
-
The methods of installing and mounting loudspeakers to any surface (bracket, ground anchoring, etc.) depend on the conditions and standards of construction, refurbishment, safety and cabling in force and applicable to the surfaces and/or brackets involved. In addition, the products may vibrate and damage the brackets onto which they are mounted. For this reason, the installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of an incident, accident and/or any other result or damage of any kind related to the installation of loudspeakers.
-
Only use suitable handling equipment, trolleys, stands, tripods, mounts or tables recommended by the manufacturer or sold with the device. If using a trolley, take extra care when moving the trolley and device together, to prevent the device from falling off and causing injury.
-
All maintenance tasks should be performed by a qualified professional. Maintenance is necessary following any damage caused to the device, such as damage to the cabling or the plug, objects inserted into the device, liquids spilled inside the device, or if the device is incorrectly operated or dropped.
-
After any maintenance or repair work on the device, ask the maintenance technician to test it to check that it is working safely.
-
If the product is damaged in any way, its IP certification will no longer be valid, so if any liquid or solid comes into contact with the product it could present a danger to the user or could damage a third-party electronic device connected to the product.
-
Beware of buried and semi-buried components, or those running along the ground, as these pose a risk of obstacle, collision and/or fall. Do not allow children or frail individuals to approach them.
-
Some users are not sufficiently independent to safely use the product alone, particularly children under 14 and people with certain disabilities. It is therefore imperative that they are supervised and assisted when using the device.
-
To avoid damaging your hearing, do not listen to loudspeakers at high volumes for long periods of time. Listening to loudspeakers at high volumes can cause damage to the user’s ears and may lead to hearing problems (temporary or permanent deafness, buzzing in the ears, tinnitus, hyperacusis). Exposure to excessive volumes (over 85dB) for more than one hour can cause irreparable damage to your hearing.
The methods of installing and mounting loudspeakers to any surface (bracket, ground anchoring, etc.) depend on the conditions and standards of installation, refurbishment, safety and cabling in force and applicable to the surfaces and/or brackets involved. In addition, the products may vibrate and damage the brackets onto which they are mounted. For this reason, the installation operations must be performed by a qualified professional who is familiar with installation and safety standards. Focal does not provide any end-of-use warranty for a given bracket or installation, as installing the loudspeakers is the customer’s sole responsibility. Focal is therefore not liable in any capacity whatsoever in the event of incident, accident and/or any other result or damage of any kind related to the installation of loudspeakers.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio ortelevision reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Please validate your Focal-JMlab warranty, it is now possible to register your
product online at: www.focal.com/garantie
Package contents:
OD STONE 8 (fig. 1)
- 1 x loudspeaker
- 1 x circular grille
- 1 x waterproof cables connector
- 1 x quickstart guide (quick-start guide)
- 1 x set of safety instructions and warranty terms and conditions
OD SAT 5 (fig. 2)
- 1 x loudspeaker
- 3 x waterproof cables connector
- 2 x screws
- 1 x wall bracket
- 1 x stake
- 1 x quickstart guide (quick-start guide)
- 1 x set of safety instructions and warranty terms and conditions
OD SUB 12 (fig. 3)
- 1 x subwoofer
- 3 x waterproof cables connector
- 1 x quickstart guide (quick-start guide)
- 1 x set of safety instructions and warranty terms and conditions
Key points:
OD STONE 8
- Modern, elegant design that blends seamlessly into your outdoor space
- IP55-certified technical design (water and dust)
- 8″ woofer with Iris IP cone and 1″ aluminium ‘M’-shaped inverted dome tweeter
- Hanging loop
- Compatible 8Ω/70V/100V
- Compatible with OD SAT 5 and OD SUB 12 for an allround system
OD SAT 5
- Discreet design that blends seamlessly into your outdoor space
- IP55-certified technical design (water and dust)
- 5″ woofer with Iris IP cone and 1″ aluminium ‘M’-shaped inverted dome tweeter
- Brackets supplied for in-ground or in-wall installation
- Compatible 8Ω/70V/100V
- Compatible with OD SUB 12 for more bass
OD SUB 12
- Robust design
- IP55-certified technical design (water and dust)
- 12″ woofer with Iris IP cone: A deep and powerful 400W bass
- Adjustable height
- Compatible with OD STONE 8 and OD SAT 5 for an allround system.
CHOOSING AN AMPLIFIER
In an 8Ώ Amplifier configuration:
It is not an excess of amplifier power that can damage your loudspeaker and
drivers, but rather a lack of power. In fact, if the volume is too high, the
amplifier saturates and generates parasite signals that may destroy the
tweeter. The dynamic capacity and definition of Littora loudspeakers are high
enough to reveal the strengths and weaknesses of whatever amplifier is
connected to them. Your dealer will be able to guide you, depending on your
tastes and budget.
In a 70V/100V Amplifier configuration:
It is recommended to use an amplifier that delivers 20% more power than the
system’s total power to avoid a surge or damage to Littora products. Your
retailer will be able to guide you depending on your tastes and budget.
An amplifier used at full power, combined with a 70V/100V transformer, can
deliver dangerous voltages. Always disconnect the power from the amplifier and
the transformer before handling, to avoid any risk of electric shock.
Follow the recommendations and instructions/configuration of your amplifier in
order to correctly connect each Littora 200 loudspeaker.
Cable choice
Choose good quality cables with a cross-section appropriate for outdoor
installation: your dealer will be able to advise you.
LOUDSPEAKER POSITIONING
OD STONE 8/OD SAT 5
The loudspeakers should be arranged, evenly spaced, in a line or arc in order
to cover the listening area as best as possible. The space between two
loudspeakers will be at least 6.5ft (2m) for a listening station measuring
between 6.5ft – 19.6ft (2-6m) (fig. 14). However, it is possible to vary these
distances to find an ideal compromise depending on the space layout.
OD SUB 12
To supply the listening area as best as possible, place the OD SUB 12 as close
as possible to the centre of the system, avoiding any pools (fountains,
swimming pools, water sources, etc.). The optimal listening zone is a radius
of 16.6ft (6m) around the sub. For more bass, place it closer to a wall
(fig. 15).
INSTALLATION
Before installing the loudspeakers, ensure that the intended positions on the ceiling/wall/ground are not obstructed by the passage of air vents, for example, or any cables that may interfere with the installation. These products are IP55 certified for increased water and dust-resistance. To protect their service life do not expose them to constantly running water and never immerse them in water. After heavy rainfall, we recommend waiting a few hours before turning them on again; allowing them to dry-out naturally will restore nominal audio functioning.
OD STONE 8
The design of the OD STONE 8 allows it to be placed on any surface without
mounting. It can either be placed or fixed using its attachment loop located
on the base.
WALL-MOUNTING
OD SAT 5 (fig.7)
Before hanging the products, make sure the ceiling/walls are strong, in
perfect condition, and are suitable to remain so longterm. Use a professional
to fix the wall brackets (E) and only use screws and dowels suitable for the
materials. To mount the loudspeakers, securely fasten the bracket using screws
suitable for the materials. For a more discreet installation, thread the cable
through the hole in the middle of the mounting bracket and the notch on the
base (fig. 16). Make sure to leave around 113/4″ (30cm) of cable to allow you
to connect and position the loudspeaker easily afterwards. Next, direct the
loudspeaker towards the listening area and tighten the joints firmly with the
locking screws (fig. 8).
GROUND MOUNTING
OD SAT 5 (fig. 9)
Mounting in the ground is only possible in soil or sand. They cannot be
mounted in rigid metal, wood or concrete floors. Take the stake (F) provided
and plant it using your hand around 4-5cm into the ground. Then drive the
stake in as far as it will go using a suitable tool. For a more discreet
installation, thread the cable through the hole in the middle and the opening
on the bottom of the stake. Make sure to leave around 113/4″ (30cm) of cable
to allow you to connect and position the loudspeaker easily afterwards. The
stake can be cut down for installations in shallow ground. To help cut it,
there are notches on the stake at 4″ and 77/8″ (10 and 20cm).
Attention: cutting the stake will create sharp edges which could cause
injury.
Next, direct the loudspeaker towards the listening area and tighten the joints
firmly with the locking screws (fig. 8)
OD SUB 12
To supply the listening area as best as possible, place the OD SUB 12 as close
as possible to the centre of the system, avoiding any pools (fountains,
swimming pools, water sources, etc.). For more bass, move the OD SUB 12 nearer
a wall (fig. 15). Prepare the space for the sub by digging a hole measuring
13×345/8×15 (330x880x380mm) (fig. 10).Positioning (fig. 10 and 11): To get the
most out of the sub, make sure there is a minimum 23/4″ (7cm) between the
ground and the part above the ground. Adjust the height of the vent to suit
you by twisting it whilst positioned in its location. Then cover the body with
around 3/4″ (2cm) of soil. Warning: This product is only intended for use with
the body underground.
CONNECTIONS
OD STONE 8
With its 5-strand cable, the OD STONE 8 adapts perfectly to 70/100V (fig. 5)
or 8Ω (fig. 4) amplification. To do this, make the appropriate connections
using the waterproof cable connectors provided (B). To avoid any signal
disturbance, ensure that any strands that are not used are electrically
insulated using suitable equipment.
| +| –| Short circuit
---|---|---|---
8Ώ| Red| Grey| None
70/100V| Blue| Yellow| Red and Green
OD SAT 5
The power of the OD SAT 5 is adjusted using the two-position notched selector
on the back. To access it, remove the screw on the back of the satellite (fig.
6). Each position selects two values. It is the type of amplifier connected to
the speaker that determines the power emitted by the speaker.
Example: In the 20W/40W position, a 70V amplifier will deliver 20W while a 100V amplifier will deliver 40W.
8Ώ|
---|---
70V| 5W| 10W| 20W| 40W| OFF
100V| 10W| 20W| 40W| Θ| OFF
8 Ω
Dedicated position for a traditional 8Ω hi-fi amplifier.
5W/100 W, 10W/20 W, 20W/40 W and 40W/Θ
In these positions you can use a 70V or 100V amplifier.
Θ Do not use
This position requires the use of a 70V amplifier only. Using a 100V amplifier may damage the loudspeaker and the amplifier.
OFF
Default position No link is active.
OD SUB 12
With its 5-strand cable, the OD SUB 12 adapts perfectly to 70/100V (fig. 5) or
8Ω (fig. 12) amplification. To do this, make the appropriate connections using
the waterproof cable connectors provided (B). To avoid any signal disturbance,
ensure that any strands that are not used are electrically insulated using
suitable equipment.
| +| –| Short circuit
---|---|---|---
8Ώ| Red| Grey| None
70/100V| Blue| Yellow| Red and Green
SPECIAL PRECAUTIONS
Running-in period
The speaker drivers used in the Littora range of loudspeakers are complex
mechanical assemblies which need a running-in period to operate at their best
and to become acclimatised to the temperature and humidity of your
environment. This running-in period varies depending on the conditions in
question and may take several weeks. To reduce this time, we recommend
operating your loudspeakers for about 20 consecutive hours at a moderate
volume. Once the loudspeakers’ characteristics have totally stabilised, you
will be able to enjoy your Littora loudspeakers’ performance to the full.
Conditions of warranty
All Focal loudspeakers are covered by warranty drawn up by the official Focal
distributor in your country. Your distributor can provide all details
concerning the conditions of warranty. Warranty cover extends at least to that
granted by the legal warranty in force in the country where the original
purchase invoice was issued.
Specifications
LITTORA 200 OD SAT 5
Type of speaker 2-way outdoor speaker
Speaker drivers 5″ (12.7cm) Midbass, Iris IP cone 1″ (2.5cm) Aluminium
‘M’-shaped tweeter
Bandwidth 90Hz – 28kHz
Impedance 8Ώ
Minimal impedance 5.2Ώ at 250Hz
Sensitivity 88dB
Power 50W RMS – 100W Peak
Recommended amp power 8Ώ 20W – 100W
Transformer positions 70V – 100V / 5W, 10W, 20W, 40W
Temperature tolerance -20° / 65°
IP rating IP55
Angle coverage 90°
Dimensions (WxDxH) 125/8″x81/4″x125/8″ (32x21x32cm)
Weight 5.5lbs (2.5kg)
References
- Top-of-the-range speakers and hi-fi equipment | Focal
- Top-of-the-range speakers and hi-fi equipment | Focal
- Extension de garantie | Focal
- Focal
- Top-of-the-range speakers and hi-fi equipment | Focal