Y4-aespaFL Official Fanlight User Manual

Y4-aespaFL Official Fanlight

Specification

• Product: aespa OFFICIAL FANLIGHT
• Size: 94 x 94 x 257 (mm)
• Weight: Approximately 200 (9)
• Materials: ABS, PC
• Components: Fanlight, Strap, User manual
• Batteries: AAA Battery 3EA
• Usage Time: About 3Hours
• Certification:G R-C-REI-SME-aespa01 Bluetooth
• Planning: SM ENTERTAINMENT
• Manufacture: Dreamus company

Caution

• If a strong impact or exposure to water will cause damage.

• Do not disassemble or assemble on your own.

• Please use a genuine alkaline AAA batteries.

• Please remove the batteres when not in use

• Keep batteries in a safe place, out of children’s reach

• Do segregate your product and used batteries from household waste for recycling.

• where possible, according to local laws.

• nsert batteries corectly, following the symbols for positioning the positive ) and negative ( ends of each battery.If not, it might cause product mafunction and
  Overheating which may result fire or bums.

• There’s a possibility of radio frequency interference during wireless operation

How to use

aespa Official Fanlight has Standard Mode and Bluetooth Mode

Standard mode
Standard Mode is the mode that the light changes by clicking the power button.

• Standard mode ON /OFF
  Please press the power button briefly.

• Order of changes of the light
  aespa On-) aespa Blink -) aespa Flicker -> aespa Mode – Off
  Please maintain standard mode for wireless control during the concert

Bluetooth mode

• Bluetooth Mode is only used to register the seat through the exclusive application.
• The Fanlight is not controlled centrally if the Bluetooth Mode is on.
• Please change to the Standard Mode for central control at a concert.
• Please folbw the direction of the exdlusive application, when the Fanlight is on Bluetooth Mode
• The application will be released later.

Replacing Batteries

If the battery is low voltage, the power is automatically turned off.
Please replace with new batteries.

CAUTION

• Be sure to insert the batteries after checking the polarities.
• Be sure to put the battery holder with the pointed side up.
• When the batteries are overheated suddenly, please remove the batteries immediately and contact to customer service center. (Do not hold by hand due to risk of bum)
• It is recommended to use new batteries for each concert or performance
• If you force to tum the battery holder over 90 degrees to open or lock the battery holder, it may damage the Fanlight.

Other Functions

Exclusive Accessories of aespa Official Fanlight

• You can decorate your own aespa Official Fanight with the exclusive accessories.
• Water or physical damage without custom emblem can cause product malfunction. aespa Exclusive Accessories are sold separately.

Warranty Period and Repair Service

• Any defect, replacement, or refundof the product, please contact your dealer.

• Free waranty period is three months from the date of purchase. Even within the free waranty period, if the defects of the product occured by the customer’s fault,
  repair cost will be charged.

• Shipping charge is the customer’s responsibility.

• Repair service is only provided after requesting the service through an email.

• Please send the product after application and consultation is completed.

• Replacement Service: Product can be replaced within the free warranty period (3 months from the date of purchase) for the following factors: (the shipping charge is on customer’s responsibility)

• Defects of operation of LED.

• Malfunction of the power button.

• Defects of the battery holder.

• Paid Repair Service: within the one year after the date of purchase, the product can be repaired for the following factors, but the repair cost and shipping fee will
  be charged

• After the free warranty. (three months after the date of purchase)

• Damages on the product or the circuit caused by customer’s fault

• Disassemble the product for any modification

• Damages on the circuit by using non-certified battery.

• Damage to circuits and internal flooding due to inundation or rain.

Customer Service Center

• Product inquiry and customer service Dreamus Company.
  • TEL: 1577-5557
  • WEB: www.iriver.co.kr /[email protected] (Representative mail)D
  • Wamty:3 months from date of purchase
• How to get customer service
  In case of proper use, we will inform how to repair or replace the product after Customer consultation via phone call or email. In case of improper use due to Customer’s fault, will inform repair cost including logistic cost for customer service.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harnmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Statements
“This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1] this device may not cause interference, and [2) this device must accept any interference, including interference that may cause undesired operation of the device.”

SM ENTERTAINMENT Co., Ltd. All Rights Reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>