ARCHILIGHT Motion S Track 48V Surface Mounted Suspended Instruction Manual
- June 8, 2024
- ARCHILIGHT
Table of Contents
**ARCHILIGHT Motion S Track 48V Surface Mounted Suspended Instruction Manual
**
SAFETY INSTRUCTIONS
- Please read these instructions before commencement of installation and pass on to the user of the equipment.
- Disconnect mains voltage before starting to install.
- This luminaire isn’t suitable for looping-in connection to the mains supply.
- If in doubt consult a qualified electrician.
- This luminaire may get very warm while in use, let it cool down before touching.
- Use an appropriate driver for the power of the led and for the amount of luminaires which are going to be connected to it.
- The light source for this luminary is not replaceable; when the light source reaches the end of its useful life, the entire luminary must be substituted.
*CHANNEL CORNER H90°**
017M26A H90
*CHANNEL CORNER V90°**
017M26A V90
*CHANNEL CORNER E90°
017M26A E90
**
END FEED COVER
017M26L05
POWER FEEDER UNIT
017M26L01
Cable Section and Length Between Track and Power Supply
| Track Length(m) | 10 | 20 | 29 |
|---|---|---|---|
| Cable Length(m) | 1 | 10 | 20 |
| P(W) | Cable Section (mm2) | ||
| 75 | 0,75 | ||
| 1,5 | |||
| 150 | 0,75 | X | |
| 1,5 | X |
SURFACED MOUNTED INSTALLATION
SUSPENSION WIRE INSTALLATION SQUARE BOX
SUSPENSION WIRE INSTALLATION CYLINDRICAL BOX
ELECTRICAL CONNECTION POWER SUPPLY
Documents / Resources
|
ARCHILIGHT Motion S Track 48V Surface Mounted
Suspended
[pdf] Instruction Manual
Motion S Track 48V Surface Mounted Suspended, Motion S Track, 48V Surface
Mounted Suspended, Surface Mounted Suspended, Surface Mounted, Mounted
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>