TitanOwl WIS09ABGN WiFi to LAN Network Adapter, Wireless to Ethernet User Manual
- June 8, 2024
- TitanOwl
Table of Contents
TitanOwl WIS09ABGN WiFi to LAN Network Adapter, Wireless to Ethernet
INSTRUCTIONS
Important note
- PLEASE READ BEFORE UNPACKING AND USING Adapter
- And PLEASE CONTACT US at info@titanowl.com to address any issue. Otherwise restocking fee may apply due to cost of shipping/handling and labor
- This adapter must be installed first and get SOLID Permanent BLUE LIGHT before using it. Showing purple light and turning off means Not connected to your WiFi network, please use at least 2.0AMP power USB adapter to power it up.
- DO NOT connect it to TV’s USB port – Use USB wall plug, because some TVs do not have standard USB port or do not provide enough power and TV may pick adapter as different adapter wrongfully.
- Use yellow RJ-45 Cable that is included in the package to connect it to your TV or pc or other devices, otherwise there won’t be any Internet or network.
- Your TV NETWORK (or your device’s network in its setup) must be set to WIRED.
- Your TV (or device) must have Ethernet port as mentioned in the listing and advertising. Make sure TV has BROWSER or you know what you need from your TV when it gets connected to internet.
- We recommend to use WPS button for easy installation rather than manual way,
if your router is old and does not have WPS button then follow manual installation, and make sure to REBOOT your router at first. - For manual installation use your phone/tablet or pc to find Wi-Fi_xxxx (xxxx is a random number) network ID and connect to it and follow the instructions to get SOLID BLUE LIGHT on the adapter.
- Make sure to reset your TV and it has updated firmware and has BROWSER.
- Contact us in case of any issue by email and some pictures, easiest one: info@titanowl.com
Common issues
Your TV must be Smart TV, that means TV must have your desired Widget or it is able to download Apps (such as Prime Video, Netflix, Disney or your Favorite APP) or has its own browser. This adapter provides connection to your TV only, as advertised.
If adapter does not have solid blue light after installation that means it is not connected to router, maybe you entered wrong router password or router needs to be restarted. Blinking blue light means the signal is weak.
If connected to router while having solid blue light but no internet, it means your router has issue, please restart/reboot your router and make sure it provides 2.4GHZ signal. Please reset the adapter by pressing RESET button on its side and reinstall it again.