stador T69 True Wireless Earbuds User Manual
- June 9, 2024
- stador
Table of Contents
stador T69 True Wireless Earbuds
PACING LIST
OVERVIEW
POWER ON/OFF
AUTO POWER ON
When opening the lid of charging case, the earbuds will automatically turn
on and start pairing
Auto Power Off
Put the earbuds back in the charging case and close the case to turn them
off.
Manual Power On
If the earbuds are not in the charging case, press and hold the MFB of each
earbud for 2 seconds to power them on.
Manual Power Off
If the earbuds are not in the charging case, just press and hold the MFB of
either earbud for 5 seconds to power them off.
BLUETOOTH CONNECTION
- Open the charging case, and the two earbuds will automatically power on and enter pairing mode(One of the earbud flashes red and blue indicators alternately, the other earbud flashes blue indicato r slowly)
- Activate the Bluetooth setting on your phone, search and connect “T69″ (Once connected, you will hear a voice prompt” connected” fromn the earbuds.and the LED indicators of both earbuds go off. )
RESET
When should I reset the earbuds?
- When only one side of the earbuds play music.
- When you can’t make the two earbuds work together.
- When both of the earbuds fail to pair with each other or other connections issues,etc.
How to reset it?
- Delete “T69” from the Bluetooth list on your phone and turn the Bluetooth off.
- Take out the two earbuds from the charging case,wait until one of the earbuds flashes red and blue alternately and another flashes blue slowly.
- Tap the control area(FBM)of either earbud 6 times quickly, the earbuds will turn off with voice prompt” power off”. Reset done.
- Put the earbuds back into the charging case.wait several seconds,and take them out again. Then turn on the Bluetooth on your phone and find the “T69 to connect.
HOW TO WEAR?
For earbuds to effectively transmit sound, they need to be lodged in your ear. Please place the earbuds snugly into your ear correctly in a comfortable way.
MUSIC
INCOMING CALL
CHARGING
Charging the Earbuds
Put the earbuds into the charging case and close the case,the earbuds charging
indicator for the L/R sides will flash from the 1st grid to the 4th grid to
show the charging status of the earbuds. In order to save power consumption,
the charging indicator for the earbuds will turn off in 10 seconds. after the
charging case is closed until the case is opened again. A single full charge
for the earbuds takes around 1.1 hours.
Charging the Charging Case
Method 1: Wired Charging
Please use 5V/1A adapter with the charging cable to charge the case.You can
also charge it with a computer USB or other devices USB interface.
Method 2:Wireless Charging
Put the charging case correctly on the wireless charging pad to charge. (The
Wireless Charging Pad Not Included) Please try to reposition the charging case
if it is not charged.
PRODUCT MAINTENANCE
SPECIFICATION
Earbud (Each)
- Model Name: T69
- Transmission Distance: 10m/33ft (without obstacles)
- Supports: HSP/HFP/AVRCP/A2DP
- Battery Capacity: 40 mAh
- Charging Time: 1.lH
- Standby Time: 300OH
- Weight: approx 4g
- Size: 35.25 18.40*10.43 mm
Charging Case
- Battery Capacity: 400 mAh
- Charging Time: 2H
- Charging Port: Type-C
- Weight: approx 38g
- Size: 63.8928.81 52.45 mm
PRODUCT MAINTENANCE
- Never dismantle or refit the product to avoid malfunction or fire hazards.
- Keep away from corrosive liquids to avoid damage to the product.
- Keep away from extreme ambient temperatures below 10C or above 60-C.
- Keep away from children and pets.
- Never touch the earphone with sharp objects, otherwise, it will easily cause scratches.
- Don’t use the product in thunderstorm weather to avoid malfunction or electric shock.
- If it has not been used for more than 1 week, please charge and maintain it in time to ensure that it is safe.
FCC
FCC Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.