Shenzhen Youmeile Electronic Technology YML320S Wireless Rechargeable Electric Cleaning Brush User Manual
- June 9, 2024
- Shenzhen Youmeile Electronic Technology
Table of Contents
Shenzhen Youmeile Electronic Technology YML320S Wireless Rechargeable Electric Cleaning Brush
Assembly
Charge It
Please fully charge the tool before use (5 hours).
The red light will be on when charging, and the green light will be on when
fully charged.
When the machine is working, the green light flashes to indicate that there is
no power, and it needs to be recharged at this time.
Choose & Attach Cleaning Parts
The matching 5 heads can reach your various cleaning needs.
Before attach cleaning parts, the machine should be in the stop state.
According to the lock and unlock rotation direction marked on the machine, the
brush head can be installed or removed by rapid rotation.
Working
- Press the ON/OFF switch once to enter the high‐speed working mode. You can use an egg beater to stir eggs, or use an appropriate brush head to remove stubborn stains
- Press the ON/OFF switch twice to enter the low‐speed operation mode.
You can use an appropriate brush head to clean the porcelain surface Hold it
firmly and use with a light pressure as you move the tool back and forth over
the surface to be cleaned.
If too much pressure is applied, the tool will be turned off.
The Versa is designed to shut off if too much pressure is applied.
Heavy Duty Brush
Easy cleaning of corners and recesses of sinks and gas stoves, and powerful
removal of stubborn scum in ovens.
Sponge Brush
Effective decontamination, no damage to hands, no damage to the glaze of
dishes, cookware, pots and pans.
Nano Eco-friendly Cleaning Brush
Effective decontamination, no damage to hands, no damage to the glaze of
dishes, cookware, pots and pans.
Coffee Cup Brush
Clean residual dirt on coffee cups, also can be used to brush wine glasses,
tea cup.
Eggbeater Head
As a portable electric whisk mix the egg yolks and sugar into a smooth paste.
How to Use
When you use this product for the first time or after a long period of time, it should be charged first.
- Insert the data cable of the wireless charging base into the charging port of the adapter.
- Insert the bottom of the product into the charging slot of the wireless charging base.
- When the charging indicator lights up, the product will enter the charging state.
- Red light is on when charging, green light is on when fully charged.
- The switch button does not operate while the product is charging.
- Select and install the brush head to be used.
- Press the ON/OFF key to start working
Attention
If water or sundries enter the charging hole of the charging base, please
clean it before charging, otherwise the charging will fail.
Please do nof charge or maintain the product under 0’C or above 40 ‘C ,
otherwise it will decrease the performance of the product.
Please do not hang debris on the power cord during charging.
During charging, if the temperature of the charger rises, it is a normal
phenomenon.
When charging, make sure the charging plug is tightly plugged in, otherwise
the charging operation may not be carried out.
Please note that slight water throw may occur in use.
FCC Warning
NOTE 1 : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Refer to KDB 784748 Anner A section A.5:
-
(a) Max. Electric Field Emissions: 0.2241V/m
Max. Magnetic Field Emissions: 0.2334A/m -
(b) The maintenance of the system is the responsibility of the manufacturer.
-
(c) To prevent interference, the product should be as far away from devices operating at the same frequency as possible.
RF exposure considerations
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.
this device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions;
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>