DAJA DJ6 Portable Engraving Machine User Manual

DJ6 Portable Engraving Machine
User Manual

DJ6 Laser Engraving Machine LJser Manual.
Please read this manual carefully before use and keep it properly for tuture reference.

Thank you for choosing our laser engraving machine, which is a high-tech optical-electric mechanical equipment. Please read the user manual carefully and follow the  instructions for better use and maintenance of the equipment.

Important Statement!

All losses resulting from improper use or failure to follow the manual instructions shall be borne by the user itself.Our company owns the final interpretation right of the user  manual as well as the right to modify all the items, data and technical details in this user manual.

Safety Precautions

• The operator must read the user manual carefully before use and strictly abide by the operation instructions.
• Risks may exist in laser processing and the user should carefully consider whether the object is suitable for laser processing.
• The object to be processed and corresponding emissions shall comply with the requirements of local laws and regulations.
• This machine adopts four types of laser equipment (strong laser radiation), which may cause the consequences as follows:
• Ignite the ambient combustibles;
• Other radiation or toxic and harmful gases may be produced during the laser processing of different objects;
• Direct exposure in laser radiation can cause physical injury. Fire-fighting equipment must be available on the site. It’ s prohibited to stack flammable and explosive  materials on the workbench and around the equipment. At the same time, the site must have good ventila­tion.
• The place to use the machine should be dry, free from interference and influences by pollution, vibration, strong electricity and magnetism.
• Ambient temperature should be 10-35C and humidity should be 5-95% (no condensing water)
• Working voltage: AC100-240V.
• The engraving machine and other related equipment must be safely grounded before it switched on for operation.
• The machine must be fully monitored during the whole operation process. All power must be cut off before personnel departure to prevent abnormal consequences. In  case of any accidents, please cut off the power immediately!
• It’s prohibited to place any irrelevant objects with total reflection or diffuse reflection in the machine to prevent the laser from being reflected to human body or flammables.
• Keep the machine away from electrical equipment which is sensitive to electromagnetic interference, otherwise the electromagnetic interfer­ ence may occur.
• Laser machine has high voltage or other potential dangers, it’ s prohibited to be dissembled by non-professionals.

Pay attention

Maintenance

Laser head is consumable. It’ s recommended to keep the machine power off for 10 minutes after 4-hour engraving and keep the machine power off for 10 minutes after 1-hour cutting.

chip/Plastic/StonelLeather/Fabric/Bamboo/Metal Paint
Interface Specification| Power Port: DC005, Data Port: USB type B
Wavelength| 450nm
Engraving Area| 80*80mm
Input Power| 24W
Laserhead Power| 3W
Image Format| JPEG/BMPITIF/GIF
Resolution| 0.05mm
Machine Voltage| 12V 2A
Optimal Focus Range| 30-50mm
Max Focus| 100mm
Application Software| Computer Software, Phone APP Engraving Software
Gross Weight| 1.65KG
Product Size (L x W x H)| 167x167x165mm
Packing Size (L x W x H)| 230x 230 x 165mm

Product Structure Diagram

Engraving Parameters

Focus Adjustment

1. Turn laser head left and right to form the smallest focus for higher accuracy and better engraving effect.
2. Optimal engraving distance: 3.5-6cm
3. t’s most important to adjust the focus:
   1. Turn the laser head left and right to make the smallest light spot;
   2. It’s optimal to keep 3.5-6 cm cf distance between laser head and object surface;
   3. The focus of laser head needs to be readjusted to engrave objects of different heights.

Software Download and Installation

Scan the QR code to download.

https://play.google.com/store/apps/details?id=com.yscoco.sculpture

Note: 1. For Android system, open the browser to scan the QR code to download; 2. Corresponding authority should be permitted after successful installation;

APP Machine Connection:

• Connect the machine to power supply; Activate Bluetooth function in the mobile phone;
• Open engraving software in the phone, click “No Connection” in the upper right comer to automatically search for the device;
• Then click “Engraver-0000;r; Note: “000#n” represents the serial number of the machine.
• Wait for 1-2 seconds till “Connected” displayed in the upper right corner, which indicates that the APP has successfully connected to the machine, then continue with the next step.

Software Interface Introduction

Introduction to software interface (loading):

1. Setting New User Guide/ Feed-back / User Agreement and PrivacyClauses/Equip ment/Language Setting
2. Load Photos for Engraving Add photos from Album Add photos from Gallery
3. Take photos via camera 0 Software Built-in Graphics
4. Add Graffiti Self-draw Text Photo
5. Edit Text O Add QR code QR Code,Barcode

Introduction to software interface (Loading content) :

1. Contrast
   Drag the slider to adjust the contrast of text and photo

2. ABCD ABCD ABCD
   Contrast 16 Con trast 50 Contrast 80 Black and White

3. To process photos to black and white

4. Grayscale
   Grayscale mode, adopt the function for engraving photos to adjust photo grayscale

5. Contour
   Cutting mode for wireframe cutting of engraving machine

6. Sketch
   Sketch mode, enhance the 3D effect of photo outline
   

Introduction to Software Interface (Load Content):

Computer software installation

Software can be acquired as follows:
Method 1: Acquire the driver, software, photos and other data from the USB flash disc provided Note: Before the use for the first time, please copy all the data from the USB  flash disc to your computer as backup to prevent accidental loss due to improper operation.)

1. Path to Install Driver:
   Enter the USB flash disc and double click the folder: 0l- windows/driver/Windowsl0_Driver/CP210xVCPlnstaller _x64/click Install/Next/Confirm to complete the  installation.

Windows Driver Installation

Path to Install Software:
Enter the USB flash disk and double click the folder:/win­ dows /software/Laser_2.0.41211018)/ After the progress bar has done,the installation is completed /Laser.

Tips:
After clicking Laser_2.0.4 1211018), if anti-virus software or PC Manager prompts to warn the risks. Laser_2.0.4 (211018) file is a win system installation package. If it is misjudged as a suspicious file,Please select “allow all operations” to complete the software installation.
Online Operation:
Connect the machine to the computer with data cable Double click the software icon – click the “connect device” icon — the icon turns blue to complete the online connection.

Mac Driver Installation

Path to Install Driver:
Path to Install Driver: Enter the USB flash disk and double click the folder: 02_MAC/driver/Mac_OSK_VCP_Driver/installation introduction/installation type/installation/installation completed Note; The software can be installed after the driver has beer installed, please watch the video for detailed operation.

Mac software installation and online Introduction

Path to Install Software:
Enter USB flash disk and double click the folder: 02_MAC ‘software/Laser-2.0.4/move software icon to the right/complete installation
Online operation:
Connect the machine to the computer through data cable Double click the software icon –click “connect device” icon — the icon turns blue to complete the online  connection.

lntroduction to the use of software

Introduction to Icon Functions in Software Interface:

Setting of Software Parameters:

FQA

No response from the machine when being powered on.

1. No power supply: Please check the socket and switch as well as the machine power socket to ensure that they have been correctly plugged with normal power supply.

It cannot be connected to computer

1. USB cable not connected: Please check the USB data cable interface on the machine and computer to ensure it’ s correctly plugged. The USB interface on the front panel  of some desktop computers is invalid, it’ s better to connect to the interface on the back.
2. Driver not properly installed: Install the driver according to the instructions. After the installation is done, the computer will recognize the device as a serial port, which  means the hardware connection is OK.
3. Other special problems: Pull out the USB data cable and power cable, keep the machine power off for 5 seconds and then try the connection once again.

No response from the phone APP when being connected to the machine.

1. Wrong Bluetooth connection: Make sure it’ s connected to the Bluetooth released by the machine. Please read “App Connection” in the User Manual for details.
2. Incompatibility: In the case of abnormal connection due to incompatibility of newly-released phone or upgraded system, please contact our customer service with the  screenshot of phone configuration so as to get technical support as soon as possible.

Shallow engraving effect or no traces.

1. Inaccurate focus: Refer to the “Focus Adjustment” in the User Manual to make the correct focus.
2. Engraving speed: Too fast speed is due to short burning time. Please read the “Engraving Parameters” in the User Manual to readjust the parameters.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>