Vorgee 808044 4 Layer Back Float Buoy User Manual
- June 3, 2024
- Vorgee
Table of Contents
Vorgee 808044 4 Layer Back Float Buoy
DEFECT
The product may not comply with the mandatory standard ‘Consumer Goods (Swimming and Flotation Aids) Safety Standard 2017’. Buoys in the affected batch may have an unreliable clip. The central (secondary) safety wall lock may not hold, allowing the buckle to be released with a one-hand motion, or by pulling firmly on both straps.
HAZARD
If the clip is released, the strap and buoy may loosen or separate from the swimmer. Sudden release of the clip could increase the risk of serious injury or death by drowning.
WHAT TO DO
- Please check your Back Float Buoy for the batch codes F/F/T and F/E/U. The Batch code can be located on the top side of the product, underneath the strap. Or on the back left hand corner, if still packaged.
- If your Back Float Buoy has the batch codes F/F/T or F/E/U, please cease use immediately and contact Vorgee to arrange a reply-paid return, and for instructions on obtaining a replacement or refund.
CONTACT DETAILS
You can contact Vorgee by phoning 07 3841 8871 Mon-Fri 8:00am-4:00pm, via email at enquiries@vorgee.com or go to www.vorgee.com
Seeproductsafety.gov.au for Australian product recall information
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>