ARI San Diego 30 Floating Vanity Installation Guide

ARI San Diego 30 Floating Vanity

Specifications

• Dimensions: 30.0″ x 19 1/4″ x 34 1/2″
• Materials & Tools: Safety glasses, Pencil, Level, Tape measure, Stud Finder, Assorted screwdrivers, Assorted Wrenches, Drill, Screw gun, Caulking gun, Hammer, Screws, Nail anchors/Molly screws

FAQs

• Q: What should I be careful of during installation?
  • A: Be sure to avoid internal cables and pipelines when making holes in the wall.

DIMENSIONS

WARNING! In the hole in the wall, please be sure to be careful to avoid the internal cables and pipelines.

MATERIALS & TOOLS

• Safety glasses,
• Pencil,
• Level,
• Tape measure,
• Stud Finder,
• Assorted screwdrivers,
• Assorted Wrenches,
• Drill,
• Screw gun,
• Caulking gun,
• Hammer,
• Screws,
• Nail anchors/Molly screws.

TOOLS REQUIRED

PARTS

Vanity Installation

• Step 1: Vanity Installation
  • Ensure you have all the necessary parts and tools ready.
  • Parts: 645, 3.515, A x2, B x6, C x2, D x2, E x6
  • Tools Required: Assorted screwdrivers, Assorted Wrenches
• Step 2: Vanity Installation
  • Follow the provided measurements and assemble the vanity according to the instructions provided.
• Step 3: Vanity Installation
  • Continue assembling the vanity according to the instructions provided.
• Step 4: Vanity Installation
  • Complete the assembly of the vanity following the provided steps.
• Step 5: Vanity Installation
  • Attach the remaining parts as per the instructions.
• Step 6: Apply Silicone
  • Apply silicone as directed to ensure proper sealing.
• Step 7: Final Touches
  • Complete any final touches required for the vanity installation.
• Step 8: Allow to Set
  • Allow the installation to set for 24 hours before using the vanity.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>