XDCOLLECTION P330.89X RCS Recycled TPU Fit Watch User Manual

: August 31, 2024
: XDCOLLECTION

XDCOLLECTION P330.89X RCS Recycled TPU Fit Watch User Manual

DEVICE ACTIVATE & CHARGE

Please charge the watch for 2 hours before first use with the included charger. The charging method is illustrated
Make sure that the Fit watch is charged in order to work

COMPATIBLE WITH BELOW VERSIONS:

Apple Store: IOS 8.0 & above
Google Play store: Android 4.4 and above (most common models) Support BT 5.0
Before connecting with the app, please make sure the BT connection of your mobile device has been enabled.

PAIR THE DEVICE

Apple iPhone (IOS 0 and up), please search “Flagfit 2.0” in the App store to download and install it.
Android phone (4.4 and up), please search “Flagfit 2.0” in the Google Play Store to download and install

Download the app by either scanning the QR code or search for
“Flagfit 2.0” and download in the Apple Store or Google Play Store.

CONNECTING THE ACTIVITY TRACKER TO THE APP

Note: Turn on the BT on your phone and keep the watch near the phone while pairing.
Please note: the screenshots di¦ers from versions of the APP due updates of the new versions.
Make sure the screen is on before pairing by tapping your finger to the device. This is a point touchscreen, which means that this activity tracker could only be remoted by the sensor that is located within the square position on the screen.
Single click on the sensor: to switch interface or option
Press and hold the sensor: to enter the chosen function or to turn on device.

PAIR THE DEVICE

After you downloaded the app, turn on Bluetooth on your phone. Open the app and press ‘add new device’. The app will find the activity tracker as ’Fit Watch’. The name of your personal activity tracker are to be found in the menu of the activity tracker. Scroll to ‘more’, hold the button for 3 seconds and then select ‘info’ with holding the button for 3 seconds.
Note: Device must connect through the App. Do not pair directly by BT on your mobile device.

CUSTOMIZE BRACELET

After connecting successfully, you can personalize and adjust your app according to your personal information (sex, height, weight and birthdate) and you can set your daily workout goals (sports target and sleeping target).

CHANGING MODUS

Once the device is connected to the app successfully, it will immediately start recording and analyzing your activities and sleep automatically. Tap on the sensor on the screen of your activity tracker to switch into di¦erent display modes as followings:

Tap on the device to change between above display modes.

Home screen:

Here you can check the time, date, your daily steps, your burned calories, and the kilometre distance you walked.

Weather:

Press for 3 seconds to see detailed information about the weather today.

Heart rate monitoring:

Tap the screen until to the heart rate icon to test your heart rate data, please wait around 10s to show your heart rate.

Blood pressure:

This function will measure the pressure of your blood.

Blood oxygen:

This function will measure the concentration of oxygen in your blood.

Messages:

Here you can check the messages you received.

Training:

Long press the button to select training modus. Scroll through the di¦erent modes and select your training type by long pressing the screen.

Stop watch:

Long press to select stop watch modus and short press to start/pause. Long press to end stop watch function.

PRESS MORE FOR EXTRA OPTIONS:

Info:

Press for 3 seconds to see the firmware version number and Bluetooth address of the watch.

Brightness:

Press and hold to choose di¦erent brightness. There are 4 levels of brightness. acker back to factory settings.

Restore Settings:

Press and hold the button for 3 seconds to clear all the data in the bracelet. The data in the APP will be cleared on that day (other historical data will be retained).

Power Off:

Press and hold for 3 seconds the button to switch o¦. The phone will shake at the same time (if the phone is in low power, it will not shake.)

APP FUNCTIONS

To keep track of activities in the app, you must ensure that the synchronization function is on during the day. If this is not the case, the app cannot save your activity history. You can synchronize by opening the app daily.

Arrow:

Select to start a cumulative distance and time track.

Step goal:

Here you can see how many percent of your daily step goal you completed.

Sleep record:

When you wear the watch during your sleep, you can here check information about your sleep.

Heart rate:

Select heart rate and then press start to check your current heart rate.

Blood pressure:

Select blood pressure and then press start to check your current blood pressure

Feature:

Here you can change the settings of your bracelet

Profile:

Here you can check if the app is connected to your bracelet, create an account and sign in, change your daily step goal and check the app version.

Training screen funtions:

Nursing and wear consideration and precautions

This product is an electronic monitoring device and does not serve to provide medical reference or
Periodically clean, especially the parts in contact with the Use a clean, moist cloth.
Keep the band away from hot water and Non-toxic
If the display is broken, do not
Do not expose your product to extremely high or low
Do not make the product for a long time by the direct
Do not use abrasive cleaners to clean the

Basic Specifications
Display: 1.3” screen
Battery Type: Rechargeable Li-Poly Battery
Battery Capacity: 180mAh
Standby Time: 15days
Waterproof Level: IP67
Data Sync: BT 5.0
Working Temperature: -20~60°C