MAVERICK FORCE Force 2 Solo Wash User Guide
- August 22, 2024
- MAVERICK FORCE
Table of Contents
MAVERICK FORCE Force 2 Solo Wash
Specifications
- Model ID: MAVERICKFORCE2SOLOWASH
- Power Linking Voltages and Frequencies:
- 100 V, 60 Hz – Current Draw: 6.82 A
- 120 V, 60 Hz – Current Draw: 5.57 A
- 208 V, 60 Hz – Current Draw: 3.24 A
- 230 V, 50 Hz – Current Draw: 3.07 A
- 240 V, 60 Hz – Current Draw: 2.93 A
Product Usage Instructions
Safety Notes
-
Ensure to follow these safety notes for installation, use, and maintenance of the Maverick Force 2 SoloWash.
What is Included
- AC Power
- AC Plug
- Connection AC Live, AC Neutral, AC Ground
- Wire (U.S.): Black, White, Green/Yellow
- Wire (Europe): Brown, Blue, Green/Yellow
- Screw Color: Yellow/Brass, Silver, Green
Power Linking
- Refer to the table for current draw at different voltages and frequencies.
- Never exceed 12A on a single circuit.
Mounting
- Before mounting, read Safety Notes.
- Use at least 2 mounting points per product.
- Ensure mounting clamps can support the weight.
- Refer to provided mounting clamps or visit the website for suitable clamps.
Control Panel Description
- Button Name: Function
- Navigates upwards through the menu list or increases numeric value.
- Exits from current menu or function.
- Navigates downwards through the menu list or decreases the numeric value.
- Navigate leftwards through the menu list.
- Enables the displayed menu or sets the selected value into the function.
- Navigate rightwards through the menu list.
FAQ
- Q: How do I power link Maverick Force 2 SoloWash products?
- A: Refer to the table provided for the current draw at different voltages and frequencies. Ensure not to exceed 12A on a single circuit. Power-linking cables can be purchased separately.
Safety Notes
These Safety Notes include important information about the installation, use,
and maintenance of the Maverick Force 2 SoloWash.
- The luminaire is intended for professional use only.
- The luminaire should be positioned so that prolonged staring into the luminaire at a distance closer than 47.2 ft (14.4 m) is not expected.
- If the external flexible cable or cord of this luminaire is damaged, it shall be replaced by a special cord or cord exclusively available from the manufacturer or its service agent.
- The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similarly qualified person.
CAUTION
- This product’s housing may be hot when operating. Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
- When transferring the product from extreme temperature environments, (e.g., a cold truck to a warm humid ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow the product to fully acclimate to the surrounding environment before connecting it to power.
- Flashing light is known to trigger epileptic seizures. Users must comply with local laws regarding notification of strobe use.
ALWAYS
- Disconnect from power before cleaning the product or replacing the fuse.
- When using an IP65-rated product in an outdoor environment, use IP65- (or higher) rated power and data cable.
- Replace and secure IP-rated protective covers to all power, data, USB, or other ports when not in use.
- Replace the fuse with the same type and rating.
- Use a safety cable when mounting this product overhead.
- Connect this product to a grounded and protected circuit.
DO NOT
- Open this product. It contains no user-serviceable parts.
- Look at the light source when the product is on.
- Leave any flammable material within 300 cm of this product while operating or connected to power.
- Connect this product to a dimmer or rheostat.
- Operate this product if the housing, lenses, or cables appear damaged.
- Submerge this product (adhere to standards for the published IP rating). Regular outdoor operation is fine.
- Permanently install outdoors in locations with extreme environmental conditions. This includes, but is not limited to:
- Exposure to a marine/saline environment (within 3 miles of a saltwater body of water).
- Locations where normal temperatures exceed the temperature ranges in this manual.
- Locations that are prone to flooding or being buried in snow.
- Other areas where the product will be subject to extreme radiation or caustic substances.
- ONLY use the hanging/mounting bracket to carry this product.
- The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
- The minimum startup temperature is -14°F (-10°C). Do not start the product at lower temperatures.
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.
- In the event of a serious operating problem, stop using it immediately.
FCC Statement
FCC Statement of Compliance
This device complies with Part 15 Part B of the FCC rules. Operation is
subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and the user.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
What is Included
- Maverick Force 2 SoloWash
- Seetronic Powerkon IP65 power cable
- (2) 140mm Omega brackets with mounting hardware
- Quick Reference Guide
AC Power
- This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
| Connection | Wire (U.S.) | Wire (Europe) | Screw Color |
|---|---|---|---|
| AC Live | Black | Brown | Yellow/Brass |
| AC Neutral | White | Blue | Silver |
| AC Ground | Green/Yellow | Green/Yellow | Green |
- To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the product from power via a breaker or by unplugging it.
Power Linking
It is possible to power link Maverick Force 2 SoloWash products. See the table
below for the current draw at each voltage and frequency:
| 100 V, 60 Hz| 120 V, 60 Hz| 208 V, 60 Hz| 230 V, 50 Hz|
240 V, 60 Hz
---|---|---|---|---|---
Current Draw| 6.82 A| 5.57 A| 3.24 A| 3.07 A| 2.93 A
- Never exceed 12A on a single circuit. Power-linking cables can be purchased separately.
Mounting
- Before mounting this product, read the Safety Notes. Use at least 2 mounting points per product.
- Make sure the mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
Mounting Diagram
Control Panel Description
Contact Us
General Information Technical Support
Chauvet World Headquarters
- Address: 3360 Davie Rd., Suite 509 Voice: 844-393-7575
- Davie, FL 33314 Fax: 954-756-8015
- Voice: 954-577-4455 Email: chauvetcs@chauvetlighting.com
- Fax: 954-929-5560
- Toll Free: 800-762-1084 Website: www.chauvetprofessional.com
Chauvet U.K.
- Address: Pod 1 EVO Park Email: UKtech@chauvetlighting.eu
- Little Oak Drive, Sherwood Park
- Nottinghamshire, NG15 0EB Website: www.chauvetprofessional.eu
- UK
- Voice: +44 (0) 1773 511115
- Fax: +44 (0) 1773 511110
Chauvet Benelux
- Address: Stokstraat 18 Email: BNLtech@chauvetlighting.eu
- 9770 Kruishoutem
- Belgium Website: www.chauvetprofessional.eu
- Voice: +32 9 388 93 97
Chauvet France
- Address: 3, Rue Ampère
- 91380 Chilly-Mazarin
- Email: FRtech@chauvetlighting.fr
- France Website: www.chauvetprofessional.eu
- Voice: +33 1 78 85 33 59
Chauvet Germany
- Address: Bruno-Bürgel-Str. 11
- 28759 Bremen
- Email: DEtech@chauvetlighting.de
- Germany Website: www.chauvetprofessional.eu
- Voice: +49 421 62 60 20
Chauvet Mexico
- Address: Av. de las Partidas 34 – 3B
- (Entrance by Calle 2)
- Email: servicio@chauvet.com.mx
- Zona Industrial Lerma Website: www.chauvetprofessional.mx
- Lerma, Edo. de México, CP 52000
- Voice: +52 728-690-2010
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Mexico, France, Germany, or Benelux, contact the dealer of record.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>