XDCOLLECTION P329.96X Plastik-3W Speaker Mit Bambus and 5W Wireless Charger Instruction Manual
- August 15, 2024
- XDCOLLECTION
Table of Contents
XDCOLLECTION P329.96X Plastik-3W Speaker Mit Bambus and 5W Wireless Charger
Instruction Manual
DEVICE LAYOUT
- Volume-/Previous song
- Speaker
- Volume+/Next song
- On/off button/Play/pause button
- Type-C charging port
- AUX port
- Charging indicator
- Wireless charging surface
- Wireless charging indicator
SPECIFICATIONS
| Speaker driver (mm) | 45mm |
|---|---|
| S/N Ratio (dB) | 70dB |
| Frequency range (Hz-KHz) | 150Hz-15KHz |
| Continuous playing time | 4-6 hours |
| Charging time | 3 hours |
| Battery capacity Speaker | 1.200 mAh |
| Mic function | Yes |
| Pick up function | Yes |
| BT version | 5.3 |
| BT pairing name | Bamboo 3W speaker |
| Output | 3W |
| Wireless output | 5W |
FUNCTIONS
| Play/pause music | Short press “O” |
|---|---|
| Pick up phone call | Short press “0” |
| Reject phone call | Long press “0” |
| End phone call | Short press “O” |
| Next song | Long press “>” |
| Previous song | Long press “<“ |
CHARGING THE SPEAKER
A full charge is approximately 3 hours and plays continuously 4-6 hours.
Connect the speaker to the Type-C USB charging cable to charge. When the LED
indicator is RED, the speaker is charging. The LED indicator goes off when the
device is fully charged.
HOW TO USE
If you want to pair your mobile device with the speaker, please make sure the
BT mode on your device is switched on. Switch the power on/off button on to
pair the device. After doing so the speaker will be visible in the Bluetooth
devices overview of your device. Please select ” Bamboo 3W speaker” to pair
your mobile device with the speaker.
USING THE WIRELESS CHARGER
- First plug the wireless charger using the included Type-C cable into the USB port of your wall adapter.
- Make sure your phone is compatible for wireless charging
- Put your wireless charging enabled device on the wireless chargin surface.
WARNING!
- Keep the product dry; do not place the product in damp places.
- Keep out of direct sunlight and high temperatures High temperatures may result in damage.
- Keep out of cold temperatures, this will help avoid internal damage.
- Do not disassemble the product.
- Avoid dropping the product.
- Do not continue to charge the product over 10 hours.
- When charging use the Typ-C charging cable that came with the product.
- Some phone cases may block the wireless charging
- Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger pad.
- Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
- When the mobile device is not placed on the charging surface accurately, your mobile device may not charge properly.
- If you use the wireless charger in areas with weak network coverage, you may lose your network reception.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>