IDEON Audio Sigma Wave USB Isolator Instructions
- August 6, 2024
- IDEON Audio
Table of Contents
IDEON Audio Sigma Wave USB Isolator Instructions
Eigma Wave USB isolator
Thank you for purchasing the Ideon Audio Sigma Wave USB isolator.
This is a brief reference guide to quickly set up and use your device. You can
download the full manual and the warranty terms from our web site at
https://ideonaudio.com/downloads.
Front Panel
Power On/Off
To power on the device, lift the on/off (power) switch to the “ON” position
located at the back of the device, as shown in the photo. A white LED light at
the center of the front face will indicate that the device is on. The long
white LED strip on the front faceplate indicates that the device is operating
normally, and that the USB signal is passing through. To turn off the Sigma
Wave, use the same on/off switch at the back of the unit and move it to the
“OFF” position.
Back Panel
Back Panel
Please complete all necessary connections (see pictures below) before
connecting the power cord to the mains. Once all connections are made, connect
the power cord to the mains and switch the device on, as shown./
PC /Laptop or Streamer / Music Server
Σigma Wave USB Isolator
DAC or Re-Clocker
© Gideon Audio, 2024 – Σigma Wave | Quick Reference Gideon Audio reserves the right to change specifications without notice. For any other info refer to the full manual.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>