VIVID STORM PLUS Electric Slimline Tab Tension Screen User Manual

: July 25, 2024
: VIVID STORM

Table of Contents

PLUS Electric Slimline Tab Tension Screen
Product Information
Specifications
Product Usage Instructions
- To Users
- Safety Instructions
FAQ

PLUS Electric Slimline Tab Tension Screen

Product Information

Specifications

Model: VIVIDSTORM BMO-TS (v2402)
Screen Type: Electric
Control: Remote Control
Installation: Wall/Ceiling/Suspended
Screen Size: Not specified

Product Usage Instructions

To Users

Thank you for choosing the VIVIDSTORM projection screen. Please
read this manual carefully before using the product and keep it
properly.

Safety Instructions

For your security and interest, to ensure safe and correct use
of this product, always comply with the following precautions to
avoid dangerous situations and damage to your unit:

Uninsulated voltages within the body may cause electric shock.
Do not make any contact with internal parts.
Ensure proper electrical grounding for safe use.
Avoid direct contact with the screen surface with hands.
Avoid accessing the inside of the housing, especially during
operation.

FAQ

Q: What should I do if the screen is not retracting

properly?

A: If the screen is not retracting as expected, check the remote
control batteries and ensure they are functioning properly. If the
issue persists, contact customer support for further
assistance.

Q: Can I install the screen on a sloped ceiling?

A: The VIVIDSTORM projection screen is designed for wall,
ceiling, or suspended installation. Installing on a sloped ceiling
may affect performance and is not recommended.

dmosrtmovrimovvirdimvsvitdimovsvritdEiovlesvrcittdmiroivcsvriStdmliiomvslriitndmieovsTvraitdbmo- ts(v2e4r0nt2im)sUoviSosvEirnRtimMSovcAPvrNiLredUUimeAvSnLsvitdiv

stor rm v ivi st Content v id To Users —————————————————2 ivid sto rm iv Safety Instructions ————————————-2 v id Packing Contact —————————————-4
The Introduction Of Product————————–5
v ivid sto rm iv Appearance———————————————5
Certificate ————————————————8
v Important Safety Precautions ———————–9 m v ivid sto rm iv Matters Needing Attention ————————-10
Matters Concerning Projection ——————–12
v Projected Area —————————————12 v id to m About Screen Performance ————————-13 rm iv s r Installation Warning ———————————-14 v id o Before pre installation ——————————14 t m Hardware Parts List ———————————14 o rm iv s r Suspended installation ——————————15 dsto orm m v vividividstostorm Wall / ceiling installation—————————–17

Screen Running —————————————-19 Remote control —————————————19
Screen Height Limit Setting ————————-21 Screen Maintenance ———————————-22 Manufacturer’s Warranty —————————-23 Certificate ———————————————–25 Product Warranty Card ——————————-25

stor rm v ivi st ToUsers v id Thank you for choosing the VIVIDSTORM projection screen.
Please read this manual carefully before using the product and keep it properly.
ivid sto rm iv The manual of products, accessories, user interface, etc. in this description are schematic diagrams and are for reference only. Due to
product updates, the actual product may be slightly different from the schematic diagram, please refer to the actual product.

v id Safety Instructions v ivid sto rm iv For your security and interest, to ensure safe and correct use of this product, always comply with the following precautions to avoid
dangerous situations and damage to your unit:

m v ivid sto rm v iv SafetyInstructions This symbol warns the user that uninsulated voltages within thebody of this product may be sufficient to cause an electric v shock, therefore, any form of contact with any part within the body is a risk of electric shock. rm v ivid sto rm EarthTerminalGroundSymbol This refers to using this product needs electrical grounding.

This symbol reminds the user to some important information related to operation and maintenance. Please read this information carefully to avoid incorrect operation.
Shipping Instructions Please use this product’s original packaging or same materials to transport this product.

v id to m This symbol reminds users do not touch the screen with o rm iv s r handsdirectly.

This symbol reminds the user to stay away from the inside of the housing, especially during operation.

v id o This symbol reminds users not to throw sundries into t m the housing inside to avoid mechanical damage to the screen. dsto orm m viv ivids stor Keepchildrenandpetawayfromtheproduct.

Do not place the equipment near fireplaces or high temperature objects such as gas stoves, barbecue or heaters;
This symbol reminds the user prevent hands or other body parts from entering the inside of the bracket, causing hand pinching; All items that are not product parts should be kept away from moving parts.
2

stor rm v ivi st To prevent electric shock, fire hazard. v id – Using incorrect cables may affect product performance, and may even lead to electric shock, fire and other accidents. In ivid sto rm iv order to ensure product performance and safety, please use the same type of cable as the original cable. v id – If a power extension cord is required, use a power cord with an amperage rating not lower than that of the product.
Otherwise, it may cause the power cord to overheat, and even cause electric shock, fire and other accidents. – In thunderstorm weather or when the product is not used for a long time, please unplug the power plug from the socket to
v ivid sto rm iv avoid damage to the device caused by lightning or power line surges.
– Do not place flammable objects near this product to avoid fire.
m v ivid sto rm v iv Instructions for safe operation v – Never installed the screen in an unstable location, bracket,wall, or ceiling, to prevent the product from falling, causing serious v id o equipment damage and personal injury. t m – Do not attempt to disassemble this product, there are dangerous high voltages inside that could cause personal injury.
rm iv s r When repair is required, it must be done by trained or authorized service personnel. v id o – Do not place this product upright as it may tip over and cause damage.
o rm iv st rm -Make sure the product protected from rain and moisture. – Do not immerse or expose this product to water or other liquids. If any liquid or solid object enters the cabinet, please unplug v id o the power cord of the device immediately and ask professional service technicians to check it before continuing to use it. sto rm iv st rm – Do not place this product in the following environments: Poor ventilation or narrow spaces. Near any device that generates a strong magnetic field. Direct sunlight. v id o Extremely hot, cold or humid environment.
d o m iv st 3

stor rm v ivi st Packing Contact v id When opening the box, check the contents of the box the list below. If there is any omission, please contact the dealer in time.
ivid sto rm iv PLUS Electric Slimline Tab-tension Screen (2402) USER MANUAL

v ivid sto rm v ivid Projectionscreen

User manual+Envelopes

RF wireless remote (includes accessory)

Lifting ring

mrm v vividividstostormrm v viv NO. v id to m 1
o rm iv s r 2 v id to m 3
sto rm iv s r 4 d o m v ivid sto 5

Accessories Name
Projection screen
User manual+Envelopes
RF wireless remote (Contains 1 button cell battery)
(includes accessory)
Lifting ring
Wall / ceiling mounting bracket (with mini “L” type screw driver, includes wall mount accessory)

Quantitypcs 1 1
1 2 2

Wall / ceiling mounting bracket (with mini “L” type screw driver, includes wall mount accessory)
Notice:
– Parking contact will be different for different countries (regions), Please refer to the actual item.
– Please keep the original packaging for future shipments. – Gifts are not covered under warranty. – In special cases, the battery will be taken out before transported.
(Please contact the seller to inquire about the situation)
4

stor rm v ivi st The Introduction Of Product

v id Appearance

Inside the dotted line is the standard projected area
(the actual product does not have this dotted line)

Outside the dotted line is the non-projected

Lifting ring

ivid sto rm viv id Powercord

Housing

v ivid sto rm iv Tab-Tension v Screen material

m v vivid idsto torm m viv (Screenopen-frontview) rm iv s r Screws Housing

Lower axis Lifting ring slot

(Screen open- rear view) Lifting ring

o rm v vivid idsto torm m Housing

(Screen close- top view) Lower axis

sto rm viv ids or (Screenclose-bottomimage) d o m iv st 5

stor rm v ivi st Appearance v id Liftingring
ivid sto rm iv Powercordhole v id Screws
Housing
m v vividividstostormrm vivviv Screenmaterial

(Screen close – front view) Housing
(Screen close – back view) Housing

dosrtmormormvmvivvidivvidivsitdiovsitdosrtmosrtmorm (Screenopen-leftview)

Lower axis (Screen open- right view)

(After the screen is closed internal anatomy left view)

(After the screen is closed – internal anatomical view from the right)

6

dmosrtm7AoppvrePaiomrwovaerncovcirrdedimvsvitdimovsvritdiovsvritdmiovsvritdmiovsritdmiovsvritdmosvrtimovSsvcirreeLtnoimwmHovoearutesarivxniiaigsrldimvsvitdiv

ividstosrtormrm v vivvi ividsitd ScreenStartupIndicator

The screen startup indicator provides the following prompts for the operational status:
– Picture 1, if the screen jitters once at the lower axis, it indicates normal operation. If there are any abnormal situations, please contact after-sales support.

m v vividividstostormrm viv iv (Picture1) v id to m v Certificate

osrtmormrm vivvividivsidstosrtormrm REACH v id to *The right to interpret the above certification belongs to our company
d o m iv s 8

stor rm v ivi st Important Safety Precautions v id Please read all the contents of the user guide carefully
and follow the operation steps below.
ivid sto rm iv For reference when necessary, please keep this user guide. v id

In order to avoid damage to the equipment, please prohibit the use of any accessories not authorized by the manufacturer.
2. Be sure to handle the products carefully during transportation, so as to prevent product damage caused by collision.
v ivid sto rm iv 3. In order to ensure the personal safety of the user and realize the reliable operation of the equipment, please make sure to use the power cord provided by the equipment to connect the power supply for charging.
v 4. Please place the device close to the power socket to connect the power supply for charging. m v ivid sto rm iv 5. You need to place the product properly. Please do not place any heavy objects on the power cord and screen to avoid danger
or operation obstacles.
v id o v 6. In order to avoid electric shock, short circuit or fire caused by loose plug, please use the power cord correctly. t m 7. Please do not disassemble the screen by yourself. In case of machine failure caused by your improper operation, the seller rm iv s r and the manufacturer have the right not to be responsible for replace the product. In case of personal injury, no liability shall
be assumed.
v id to m 8. The tubular motor on the electric screen of this product has a temperature control sensor with overheating protection mechanism. If the screen runs up and down continuously for One and a half minutes, the motor will rest for more than 30
o rm iv s r minutes.in order to prevent the motor from overheating and damage,If the motor stops operation due to the start of overheat protection mechanism, please turn off the power and wait for 30 minutes to 2 hours until the motor cools down. v id to m 9.The remote control supplied with this product contains coin / button cell battery. If the coin / button cell battery is swallowed, sto rm iv s r it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
d o m v ivid sto 9

stor rm v ivi st Matters Needing Attention v id Warning! If you do not strictly follow the prescribed precautions during use, this may lead to equipment damage and other
unnecessary damage.
ivid sto rm iv Please observe the family fire safety regulations; do not place the equipment near the fireplace or high temperature v id objects such as gas stove, barbecue or heater to avoid equipment damage.
Please keep this product out of the reach of children.

mormvrmvivvidivvidivsvitdiovsitdosritdmosrtmormormvivviv Do not place the equipment near the t m fireplace or high temperature objects
dsto orm m viv ivids stor suchasgasstove,barbecueorheater

Keep children away from the product

Do not put your hands into the cover of the product
10

stor rm v ivi st Matters Needing Attention v id No one is allowed to open the inside of the equipment and repair the product without authorization, except for the authorized
technicians.
ivid sto rm iv 1. Please make sure that the power supply connected to this product has stable current.
2. If you need to use the extension cord for this product, please make sure that the power cord rating of the extension cord is the
v id same as that of this product, so as to avoid equipment damage due to overheating.
3. When your hands and feet are in contact with water, do not operate the power plug in this case.
v ivid sto rm iv 4. When you encounter heavy rain, wind, thunder or lightning in the process of using this product, please be sure to disconnect the power line.
v 5. The curtain of this product should not be placed in direct sunlight, rain and humid environment. m v ivid sto rm iv 6. In order to prevent the product from overheating, keep away from fire source and high temperature equipment when using
this product. At the same time, the power supply of this product should be cut off before transportation or maintenance. 7. Like any other household appliances, when this product is not used for a long time, please completely disconnect the power
v supply to ensure safety. v id o 8. If there is any obvious damage to any parts of the product, in order to avoid any injury and electric shock, please do not t m continue to use. rm iv s r 9. When installing in the residential and commercial buildings, users should provide reasonable protection for the products to
prevent the radiated RF energy from interfering with the operation of the products. However, there is no guarantee that the
v id o product will not be disturbed in special installation. dostormorm m vivvividivsitdstosrtmorm 11

stor rm v ivi st Matters Concerning Projection v id Projected Area
1.Please project according to the actual projection size of the screen purchased when using the projector.
ivid sto rm iv 2.Since the position of black border has been preset on the screen of this product, please do not exceed the specified projected area during projection. You should note that the default black border is not the projection area.

v ivid sto rm v vivid size

size

m v vivid idsto torm m viv Withoutblackborderdesign: Screen without black border rm iv s r (The screen diagonal size based on 16:9 ratio)

Black border has been preset

Black border design: Screen with black border

v id to m Without black border four projector ratio options o rm iv s r 1.Regardless of the ratio, it can be projector. Easily compatible with 16:9 / 4:3 / 16:10 / 2.35:1 ratio;

dsto orm m v vividividstostorm 16:9

4:3

16:10

2.35:1

12

stor rm v ivi st About Screen Performance v id 1.The screen is only suitable for normal throw projectors.
2. If there are regular creases on the screen surface after the screen is opened, don’t worry. This is a normal phenomenon. It is
ivid sto rm iv caused by the screen being curled and tightened for a long time, which does not affect the user’s viewing. After opening the v id screen for a period of time, you will notice that the stripes on the screen will gradually disappear. dmosrtmovrmovrimvvidimvvidivsvitdiovsvitdiovsritdmiovsritdmosrtmosrtmovrimvviv 13

stor rm v ivi st Installation Warning v id Since the installation environment of each user is different, the instructions in this user guide are only for reference. If you
need further installation and safety suggestions, please consult the professional installation company. It should be noted that
ivid sto rm iv no matter what kind of installation method you take, the product should not be loosened or dropped due to vibration or tension,
so as to keep the product stable. The installation personnel of the product must ensure that the bracket accessories used have
v id sufficient strength to support the product and select the appropriate installation position. v ivid sto rm iv Before pre installation
1. When you open the package, please carefully open the screen package to avoid the product from rubbing or falling.
v 2. Please always place the screen in a horizontal position. Do not install the product on an uneven or inclined surface. m v ivid sto rm iv 3. Please keep the screen away from dust, sawdust and liquid to protect the screen from contamination.
v Hardware Parts List v id o Before you install the product, make sure that all parts of the product are included. Please note that the screws supplied t m with this product may not be suitable for all mounting surfaces. Please consult the professional installation personnel or rm iv s r hardware store to get the correct installation screws and anchors.

ostormrm v vividividstostormrm HollowWallAnchor

Small screws

Wall / ceiling mounting bracket (with mini “L” type screw driver)

d o m v ivid sto 14

stor rm v ivi st Suspended installation v id 1. The lifting ring of the equipment has been installed into the slide rail and fixed when leaving the factory.
2. To adjust the position of the lifting ring, loosen the screw on the ring slightly.
ivid sto rm iv 3. After adjusting the position of the lifting ring, please tighten the screw, and then hang the equipment on the fixed wall hook.

m v vividividstostormrm v vivvidiv Unscrewtheliftingring rm v vivid idsto orm Insidethewall ostormrm vivvividsitdstormorm Hangingonthewallhook
d o m iv st 15

Move the lifting ring to the right position Tighten the eyebolt

stor rm v ivi st Note: v id – The fixed distance of the two hanger should be left and right in the middle of the cover, not too close to the middle or side;
– The screen hanging from the ceiling should be flat.
ivid sto rm iv Put the hanger on the hook. For high ceiling installation, chain or steel cable can be used (additional hanging parts need to be
purchased)
mrmv vivvidividivsitdostosrtmormrmv vivvidiv Note:pleasemakesuretheequipmentisinstalledhorizontallyanddonottiltit. dostormorm mv vivvidividivsitdostosrtmorm16

stor rm v ivi st Wall / ceiling installation v id 1. Determine the installation position of the equipment, measure and mark the distance between the top and bottom screw holes
of each bracket, and whether the distance between the two hanger is appropriate, and ensure that they are on the same horizontal line.
ivid sto rm iv 2. Then, drill a hole of suitable size at all marked points and install the bracket on the wall with screws. v id More than two people are required to complete the following steps

m v vivvidividsitdostormorm vivviv Insidethewall

Inside the wall

Wall installation

ormrm viv ividst stormrm outsideofawall sto rm v ivid sto rm Wallinstallation d o m v ivid sto 17

outside of a wall Ceiling installation

Ceiling installation

stor rm v ivi st 3. Lift the screen upward to make it level with the bracket, clip the screen into the bracket slot and push it until a “click” sound
is heard to ensure that the screen is firm.

v id Inside the wall

Inside the wall

ivid sto rm viv id outsideofawall

outside of a wall

m v vividividstostormrm viv iv Wallinstallation v 4. After the equipment is stuck in the bracket, please use the mini “L” type screw driver to tighten the screw to fix the housing v id o and the bracket.

rm iv st rm Insidethewall

Inside the wall

ostormrm v vividividstostormrm outsideofawall

outside of a wall

v id o Ceiling installation d o m iv st 18

stor rm v ivi st Screen Running v id Voltage information: make sure your screen is working at the correct voltage, depending on the area.
(Using the wrong voltage may cause the screen to become inoperable)
ivid sto rm iv (1) Plug the screen power cord into the correct power outlet. v id (2) When the screen is fully lowered and for prolonged viewing, you may choose to unplug the power cord. At this point, the
screen will remain open and will not retract or close due to the power disconnection. To close the screen, simply reconnect the power cord to resume operation.
v ivid sto rm iv Note: When the screen is turned on, ensure that there is no obstacle and enough space at the bottom of the screen to avoid
equipment failure.
v Remote Control m v ivid sto rm iv For convenient access, the remote controller can be fixed on the wall surface and other planes through the bracket.(wall screw
or double-sided adhesive tape can be used for fixation)

v id to m v Up rm iv s r Stop
v id o Down

Function key

ostormrm viv ividst stormrm Frontofremote control
d o m v ivid sto 19

Screw hole positions

inside the wall

outside of a wall

Back of the remote control

stor rm v ivi st When the battery of the remote control needs to be replaced, as shown in the figure below, unscrew the cover of the remote
control with a small screw, then replace the new button battery, close the cover of the remote control, and tighten the screw to
v id prevent the loose battery from falling off;

m vivvidividivsitdostosrtmormrm vivvivvidiv Pushup

Take out the battery

CR2032
+ 3V

front up side

bottom

load the battery Please place the battery face up and
push it in completely.

dosrtmormormvmvivvidivvidivsitdiovsitdosrtmosrtmorm Pushdown

When the back cover is closed, please jam the slot and push it down.
20

stor rm v ivi st Screen Hight Limit Setting ivid sto rm v vivid id 1

2
Four Times

One Time

v ivid sto rm viv Please ensure that the device is powered on. Begin the adjustment
after fully opening the screen.
m v vivid idsto orm viv 3

Enter adjustment mode: Use a pointed tool to press the ‘Function’ key on the back of the remote control 4 times, then within 10 seconds, press the ‘Down’ key on the remote control 1 time.At this point, if the lower axis of the screen jitters once, it indicates entry into the limit adjustment state.
4

rm viv idst orm TwoTimes

One Time

o rm viv idst orm Lower the screen to the desired height. Press the ‘Up’ key or ‘Down’ t m key for fine adjustments based on the height requirements. For
significant adjustments, press and hold the ‘Up’ key or ‘Down’ key
sto rm iv s r for 2 seconds to continuously adjust the screen position. d o m v ivid sto 21

After confirming the height, use a pointed tool to press the ‘Function’ key on the back of the remote control 2 times. Within 10 seconds, press the ‘Down’ key on the remote control 1 time. The lower axis of the screen will jitter once, indicating the successful lower limit setting. Fully close and then reopen the screen to ensure the correct screen height.
(If the height is not suitable, please repeat the adjustment according to the first step.)

stor rm v ivi st Screen Maintenance v id Cleaning requirements:
1. Use a clean cloth to dip a small amount of water around gently wipe the screen;
ivid sto rm iv 2. Please use a clean cotton cloth or soft dust brush to remove dust particles on the screen; v id 3. Due to the weather, especially the humidityThe screen surface may be wrinkled,it is a normal situation; it can return to
normal under normal temperature, and can be relieved by heating with a hair dryer.
v ivid sto rm viv Warning! m v ivid sto rm iv -Donotscribbleonthescreen.
-Do not touch the screen directly by hand.
v -Do not touch the screen with hard or sharp objects. v id o -Do not clean the screen persistently or vigorously, so as to avoid screen scratch. t m -Be sure to turn off the screen when you are not using the product. rm iv s r -This product is not waterproof, only suitable for indoor use, not recommended for outdoor use. v id o -Avoid sharp objects directly contacting the screen surface, so as to avoid puncturing or scratching the screen surface. t m -Do not use acetone, benzene, alcohol and other organic solvents to clean the screen, which will cause permanent damage to the o rm iv s r screen.
-Do not run the screen up and down for more than 3 minutes, otherwise the screen will stop running. This is the phenomenon of
v id o motor overheating protection shutdown. Please wait 20-30 minutes for the motor to cool down before continuing operation. sto rm iv st rm -To avoid possible injury, do not attempt to remove the screen. If there are obvious damaged parts, please contact your
authorized dealer.
d o m v ivid sto 22

stor rm v ivi st Manufacturer’s Warranty v id Thank you for choosing VIVIDSTORM screens for your home or business. We are committed to providing high-quality products that meet your
expectations. To ensure your satisfaction and peace of mind, we offer the following warranty policy for VIVIDSTORM screens:
ivid sto rm iv 1. Warranty Coverage: VIVIDSTORM screens are covered by a limited warranty against defects in materials and workmanship. This warranty v id applies to the original purchaser of the screen and is non-transferable.
2. Warranty Period: The warranty period for VIVIDSTORM screens is 2 Years from the date of purchase.
v ivid sto rm iv 3. Warranty Services: If during the warranty period the VIVIDSTORM screen is found to have a defect covered by the warranty, VIVIDSTORM
will, at its discretion, either repair or replace the defective screen or its components. VIVIDSTORM will cover the cost of parts and labor
v required to perform the repairs. m v ivid sto rm iv 4.Exclusions:
The warranty does not cover damage or defects resulting from:
v – Improper installation, misuse, or abuse of the screen
– Failure to follow the installation and operation instructions provided by VIVIDSTORM
v id to m – Accident, fire, flood, or other external causes
– Unauthorized modifications or repairs
rm iv s r – Normal wear and tear v id o 5. Warranty Claim Procedure: To initiate a warranty claim, the purchaser must notify VIVIDSTORM by contacting our customer service t m department at [Insert Contact Information]. A VIVIDSTORM representative will guide you through the claim process, including providing any
necessary documentation or evidence of the defect.
o rm iv s r 6. Proof of Purchase: To be eligible for warranty services, the purchaser must provide a valid proof of purchase, such as a sales receipt or order v id o confirmation, demonstrating the date of purchase.
sto rm iv st rm 7. Shipping Costs: If a warranty claim is approved, VIVIDSTORM will cover the cost of shipping the repaired or replaced screen back to the customer. However, the customer is responsible for the cost of shipping the screen to VIVIDSTORM for warranty service.
d o m v ivid sto 23

stor rm v ivi st 8. Limitation of Liability: VIVIDSTORM’S liability under this warranty is limited to the repair or replacement of the defective screen or its
components as stated above. VIVIDSTORM shall not be liable for any indirect, consequential, or incidental damages arising from the use or
v id inability to use the screen.
Other branded products or merchandise sold on VIVIDSTORM websites are under warranty provided by the brand owner or distributor. VIVIDSTORM shall act on your behalf with the warranty claims.
ivid sto rm viv id 9. Governing Law: This warranty policy shall be governed by and construed in accordance with the laws of country or region where the product
is shipped to.
v ivid sto rm iv Please note that this warranty policy is subject to change without prior notice. The warranty provided herein is in addition to any rights you
may have under applicable consumer protection laws.
v If you have any questions or need further clarification regarding the warranty policy, please do not hesitate to contact our customer service
department.
m v ivid sto rm iv Thank you for choosing VIVIDSTORM screens. We appreciate your trust in our products. dosrtmormormvmvivvidivvidivsitdiovsitdosrtmosrtmormv24

stor rm v ivi st Certificate

v id Product Name:

Product Model No:

Factory serial No

Inspector:

ivid sto rm iv Dateofproduction

v id The product has been tested and inspected after operationand all the tests and inspections have been
in accordance with the technical requirementsand its quality meets the specified requirements.Only after passing the inspection can they be allowed to leave the factory.

v ivid sto rm iv Product Warranty Card v User information
m v ivid sto rm iv Customername v Postcode: v id o E-Mail:

Customer retention sheet Customer telephone: Customer’s address: Purchasing channels

rm iv st rm Purchasedate: v id to m Invoice number
o rm iv s r Customer signature v id o Date:

Date of production Warranty content After sale:

Satisfied

Dissatisfied

sto rm iv st rm ManufacturerHUI ZHOU VIVIDSTORM FILM AND TELEVISION EQUIPMENT CO., LTD.

AddNO.66 Zhongxing North Rd , Aotou Town, Daya Bay, Huizhou City,Guangdong Province, China

v id o Websitehttp://www.vividstormscreen.com Email Ussupport@vividstormscreen.com Call Us0086-752-3096010

d o m iv st 25

*The final power of interpretation owes to our company

dmosrtmovrimovvirdimvsvitdimovsvritdiovsvritdmiovsvritdmiovsritdmiovsvritdmosvrtimovsvirtimovvirdimvs2v6itdiv