UNIWELD TGB6 Gas Test Gauges Instructions
- July 13, 2024
- UNIWELD
Table of Contents
Gas Test Gauges
Gauges/Thermometers
TGB6 Gas Test Gauges
Use to pressure test all new installations for leaks and inspection codes.
After installation and the system has been pressurized, the leakage will be
indicated by a pressure drop on the gauge.
| Replacement
Gauge| 1/2″ FPT| *Top Mount
3/4″ FPT| 1″ FPT| Side Mount
3/4″ FPT
---|---|---|---|---|---
15 psi, 2”
1⁄10 lb. incr. Full Scale| GP210-5| TGB215| TGB15| TGB115| TGH15
30 psi, 1/4 lb. incr., 2”| GP211-5| TGB230| TGB30| TGB130| TGH30
60 psi, 1 lb. incr., 2”| GP212-5| TGB260| TGB60| TGB160| TGH60
100 psi, 1 lb. incr., 2”| GP213-5| TGB2100| TGB100| TGB1100| TGH100
**0-6 psi/1⁄10 lb.,0-12 in.
of Mercury, 4” [100mm]| GD408IP| TGB206| TGB6| TGB106| TGH6
0-15 psi/1⁄10 lb.,0-30 in.
of Mercury, 4” [100mm]| GS410-5IP| TGB4215| TGB415| TGB4115| TGH415
**Special sensitive 21/2” diaphragm gauge for more accurate low pressure reading.
- Uniweld reserves the right to use either plated steel or an aluminum hex body when supplying a top mount gas test gauge assembly.
Water Test Gauges TGW300DP
Part#| Description| Replacement
Parts
and Gauges| Description
---|---|---|---
TGW300| Water test gauge with 3/4″ female hose connection, 21/2″ gauge, 300
PSI| TGW| 3/4 ” FHT x 1/4 ” female NPT connection only
TGW300DP| Water test gauge with 3/4″ female hose connection, 21/2 ” gauge, 300
PSI Drag Pointer| GS316-5| 21/2 “, 300 PSI, 12 o’clock dial
| | GS316-5DP| 21/2 “, 300 PSI, 12 o’clock dial, Drag Pointer
Uniweld Products, Inc. Fort Lauderdale, FL 33312 U.S.A. Customer Service:
800.323.2111
info@uniweld.com •
www.uniweld.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>