XIO3W Drone User Manual
- June 8, 2024
- XIO3W
Table of Contents
X103W
User Manual
Product Features
This section mainly introduces functions and installation guidelines of X103W and lists the components of the drone and remote controller.
Introduction
Thank you for purchasing the MJX X103W foldable drone. This drone is equipped
with an advanced Global Positioning System (GPS). The GPS communicates with
satellites to enable precise positioning of the drone and hovering over a
specific position. The X103W is also capable of flying in the intelligent
flight modes like Point of interest, Follow me and Waypoint flight.
The drone has a single-axis gimbal for the camera that enables in flight
adjustment of the camera angle from horizontal to vertical position. The
camera transmits 2K videos and 2MP still pictures. The drone has a built-in
micro SD card slot to record videos and still pictures in 2MP resolution.
The remote is ergonomically designed for ease of use with foldable handles
that minimize the footprint of the remote when in storage or carrying. Flight
information is displayed on the phone when the APP is active.
This drone has a maximum speed of 22 km/h (14 MPH) and flight time of about 14
minutes.
Get to Know Your X103W
The drone is stored in the shipping box with its arms folded. Follow the steps below to unfold the arms. Make sure the blades are free when unfolding the arms.
- Unfold the rear arms first (the arms far from the camera);
- Unfold the front arms next.
Note: Unfolding the arms requires a bit of force, you will feel the arm lock when it reached the fully extended position.
Battery installation
Before first flight charge the battery to make sure it is fully charged.
ALWAYS remove the battery from the drone to charge it
Caution: NEVER leave the battery charging unattended. Remove the battery
from the charging cable when the battery is fully charged – all 4 Blue lights
are on.
Insert the battery into
the battery compartment in the top of the drone body. Make sure you insert the
battery in the correct direction. Press the battery into place firmly until it
locks on both sides. You will hear a click once the locking tabs are in place.
Caution: Make sure you press the battery into place firmly and hear the “click” when it is locked. Try to pull the battery out to make sure it is properly installed. A loose battery WILL cause the drone to malfunction and may cause damage to the drone or to the person flying it or others in the vicinity.
Get to Know Your X103W Remote Controller
- Unfold the handles and open the battery compartment door (Pic. 1);
- Install 2*AA batteries into the battery compartment and make sure they are in the correct polarity (Pic. 2);
- Close the battery compartment door (Pic. 3).
- Insert batteries in the correct polarity: the transmitter requires 2*AA batteries.
- NEVER charge Non rechargeable batteries.
- NEVER mix old and new batteries.
- NEVER mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
- Rechargeable batteries MUST be removed from the drone before being charged.
- Rechargeable batteries should only be charged under adult supervision.
- Remove spent batteries from the drone and remote.
- NEVER short-circuit the battery terminals.
The X103W and Remote Parts Identifier
The X103W
This section introduces functions and
features of the X103W.
Flight Modes
Your X103W has two flights modes:
GPS mode: GPS ON
Slide the button up at the right side of the remote to “ON” (Pic.1), the drone
is in GPS mode and can precisely position itself and hover in one location
with the assistance of the GPS. When GPS signal is weak or the drone compass
is interfered, the drone will automatically change into Gesture Mode.
Gesture mode: GPS OFF
Slide the button down to “OFF” (Pic.2), the drone is in Gesture mode. The GPS
is turnned off for positioning, and the drone uses only the barometer to
maintain altitude. The drone will not fly with precise positioning and
hovering. Gesture mode requires the pilot to have better flying skills. In
Gesture mode, the drone cannot position itself or brake automatically, which
increases the risk of potential flight hazards. The drone will also be more
susceptible to its surroundings. Environmental factors such as wind can result
in horizontal shifting, which may present hazards, especially when flying in
confined spaces.
Your X103W has two flights modes:
Drone Status Indicator Lights
Drone status
indicator
No.
| Indicator status|
Meanings
---|---|---
1| Front and rear lights flash yellow rapidly.| The drone 2.4GHz comunication
is disconnected.
2| Front and rear lights flash red, green and yellow alternatively.| The drone
is under initialization detection status.
3| Front lights are solid red, rear lights are solid green.| No GPS signal,
the drone is in gesture mode.
4| Front light are solid red, rear lights are solid green.| Good GPS signal,
the drone is preparing for GPS mode.
5| Front and rear lights flash green rapidly.| The drone is under gyroscope
calibration status.
6| Front and rear lights flash yellow alternatively.| The drone is in compass
horizontal calibration.
7| Front and rear lights flash green alternatively.| The drone is in compass
vertical calibration.
8| Front lights are solid red, rear lights flash red slowly.| The drone is
nearly at low voltage, only 1/4 battery capacity is left. will be displayed on
the remote controller.
9| Front lights are solid red, rear lights flash red rapidly.| The drone is at
low voltage, only 1/6 battery capacity is left. 25 will be displayed on the
remote controller.
10| Front and rear lights flash once and stop for 1.5 second.| Gyroscope
error.
11| Front and rear lights flash twice and stop for 1.5 second.| Barometer
error.
12| Front and rear lights flash three times and stop for 1.5 second.| Compass
error.
13| Front and rear lights flash four times and stop for 1.5 second.| GPS
module error.
Return to Home (RTH) Operation
The Return-to-Home(RTH) procedure brings the drone back to the last recorded Home Position. There are 3 types of RTH modes: Smart RTH, Low battery RTH and Fail safe RTH. The following sections describe each mode in detail.
|
GPS
|
Description
---|---|---
Home Position| | If a strong GPS signal (satellites over 7) was acquired
before takeoff, the Home Position is the location from which the drone
launched. The GPS signal strength is indicated by the GPS icon ( ). The drone
rear indicator lights will blink rapidly from yellow color to green color when
the home position is recorded.
- Drone can not avoid obstacles when it is flying back with the RTH function initiated.
- Drone can not return to the Home Position when the GPS signal is weak or unavailable.
- Drone will stop ascending and immediately return to the Home Position if user moves the throttle stick in the drone reaches 15meter (50 feet) altitudes or beyond during Smart RTH.
- If there is no GPS signal and the remote controller signal lost for more than 6 seconds, the drone can not Return-to-Home but descend slowly until land to the ground and lock the drone.
Smart RTH
Use the RTH button on the remote controller or tap the RTH button in the
“MJX GPS” APP and follow the on-screen instructions when GPS (more than 7
satellites is presented) is available to initiate Smart RTH. During the smart
RTH, you can use the remote controller to guide the drone around obstacles.
You can press the RTH button again to exit RTH procedure and regain control of
the drone.
Low battery RTH
The low battery level Fail safe is triggered when the MJX intelligent
battery is depleted to a position that may affect the safe return of the
drone. Users are advised to return home or land the drone immediately when
prompted.
- When the drone rear lights flash slowly, battery icon “ ” is shown on the remote controller or on the “MJX GPS” APP. And steady “beep beep beep… beep beep beep” sound is heard. At this moment, the drone will automatically return to the Home Position if the flying altitude is beyond 30 meters (100 feet) or the flying distance against the home position is beyond 50 meters (150 feet).
- When the drone rear lights flash slowly, battery icon “ ” is shown on the remote controller or on the “MJX GPS” APP. And steady “beep..beep…beep” sound is heard. At this moment, the drone will automatically return to the Home Position if the flying altitude is beyond 15 meters or the flying distance against the home position is beyond 15 meters. If the drone flying altitude is less than 15 meters or the flying distance is less than 15 meters, the drone will automatically land to the ground.
Attention: When the drone automatically returns home with Low Battery RTH function activated, you can not cancel the RTH procedure by pressing the RTH button to regain control of the drone.
Fail safe RTH
If the Home Position was successfully recorded and the compass is functioning
normally, Fail safe RTH will be automatically activated if the remote
controller signal is lost beyond 6 seconds. Return-to-Home can be cancelled by
the pilot, allowing them to regain control when the remote controller signal
connection is re-established.
The X103W Power Switch
To turn the drone ON: Once the battery is firmly installed, press the
power switch for 3 seconds, the 4 Blue lights on the battery will come ON, the
drone will beep and the lights on the arms will be flashing.
To turn the drone OFF: Press the power switch for 3 seconds, the drone’s
lights will go off and the X103W will turn off. The Blue lights on the battery
will turn off.
Intelligent Battery
Made by high-energy battery cells and assembled with an advance battery
management system, the X103W battery is so intelligent that it is capable of
managing the charging and discharging by itself.
The battery capacity is 7.4V 1100mAh.
Charging the drone battery
- The drone’s battery needs to be fully charged before every flight;
- Please use the MJX USB charging cord for this drone;
- Full Charging time is about 120 minutes.
- Adult supervision is required when the drone is used by children under 14 years old.
- Only batteries of the same or equivalent type as recommended should be used.
- Insert batteries in the correct polarity.
- Rechargeable batteries MUST be removed from the drone before being charged.
- Rechargeable batteries should only be charged under adult supervision.
- Spent batteries should be removed from the drone.
- The supply terminals should never be short-circuited.
- The charging line to be used with the product should be regularly examined for potential hazard, such as damage to the cable, plug, enclosure of other parts. If damage is found, the product should not be used until that damaged component is properly repaired.
Attaching and Detaching the Propellers
Attaching the propellers
Install propeller A and propeller B on the corresponding motor shaft and fix
the rotor propellers tightly by rotating clockwise. (A/B marks are at the
bottom of the propeller)
Detaching the propellers
Rotate the screws counter-clockwise to take out the screws and remove the
propellers.
- Please make sure that the clockwise and the counter-clockwise propellers are installed on the correct motors, because the drone will not fly normally for wrong propellers installation.
- Be aware of the sharp edges of the propellers. Handle with care.
- Use only the MJX approved propellers. Do not mix propeller types.
- Stand clear of the motors and DO NOT touch the propellers when they are spinning.
- Check that the propellers and motors are installed correctly and firmly before every flight.
- Ensure that all propellers are in good condition before each flight. DO NOT use aged, chipped, or broken propellers.
- To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.
- ONLY use original MJX propellers for a better and safer flight experience.
The X103W Remote Controller
This section describes the features of the remote controller, including the
instruction on controlling the X103W.
Remote Controller Functions and Status
Flight mode switch
Choose the flight mode by switching the GPS button between the ON/OFF
positions.
LCD Screen display
**Remote Functions and Setup
**
No.
| Remote controller status|
Description
---|---|---
1| Signal strength indicator changes from weak to strong repeatedly.| The
remote controller is under signal connection status.
2| Indicator lights flash slowly with steady “beep beep… beep beep” sound and
the battery level “^” on LCD display is flashing.| The remote controller is
under low voltage status. Please change to a fully charged battery.
3| The drone battery level “ 55 ” on the LCD display is as shown, with steady
short “beep beep beep…beep beep beep” sound.| The drone battery is at low
voltage “ 55 “; the drone will return to the home position if the altitude is
over 30m (100 feet) or the distance is over 50m (150 feet).
4| The drone battery level “55″ on LCD display is as shown, with steady long
beep sound.| The drone battery is at low voltage “55 “; the drone will return
when the altitude is over 15m or the distance is over 15m; if either the
flying altitude or flying distance is less than 15m, the drone will land in
it’s position.
5| Signal strength on LCD display is less than two bars or no displaying, with
steady long beep sound.| 1. The distance between drone and remote controller
is too far causing a weak signal.
2. The battery in the drone is removed after the drone connects to the remote controller.
Gimbal trimmer
The camera angle can be adjusted from horizontal to vertical by adjusting
the gimbal trimmer. This feature gives a better aerial experience. When the
trimmer knob is turned upward towards the “A”, the camera will tilt upward to
the direction of the A; when the trimmer is turned downward towards the “B”,
the camera will tilt downward to the direction of the B.
Photo/Video
Press the camera button for a short period – the camera icon “ ” on the LCD
screen will flash once, a single photo was taken; press the camera button for
over 2 seconds – the video icon “ ” on the LCD screen flashes slowly, the
camera is taking video. Press again for 2 seconds to exit video shooting.
Attention: When a Micro SD card is not in the drone or the micro SD card malfunctions, photos and videos can not be taked by pressing the button on the remote controller. Operating the camera can be done only from the APP installed on a phone.
One-key takeoff/One-key landing
- After the X103W unlocked, short-press the “ ” button below, the drone will automatically take off and hover at 1.5m altitude.
- When the drone is flying, short-press the “ ” button below, the drone will automatically land on the ground.
Smart RTH button
- Press the button to start the RTH, the remote controller makes a beep sound and the drone will fly back to the recorded Home Position.
- Press the RTH button again to exit RTH procedure and regain manual control of the drone.
- For more information about RTH, please turn to Return to Home section (on page 5-6).
Low voltage warning
- When the battery icon “ ” is shown on the LCD screen, the drone front lights are solid on and the rear lights keep flashing slowly, the battery is nearly at low voltage condition.
- When the battery icon “ ” is shown on the LCD screen, the drone front lights are solid on and the rear lights keep flashing rapidly, the battery is in low voltage condition.
Signal strength indicator
Signal strength “ ” shows the strength of the signal between the remote
controller and the drone. More bars mean better signal.
Optimal transmission zone
Remote Controller Joystick Modes
Remote control modes
Mode 1: The right stick serves as the throttle.
Mode 2: The left stick serves as the throttle.
- The remote controller is set at Mode 2 by default.
Changing the remote controller mode
Step 1. Press the red lock “ ” button and turn on the remote controller power, the remote controller is under signal connection status (Pic.1); Step
2. Press and hold the RTH button “ ” for 3 seconds to cycle through the
remote controller modes (Pic.2). The remote controller mode will switch every
time the button is pressed. The mode number is displayed on the LCD screen.
The default factory setting is mode 2.
Attention: To change the mode of the remote controller, please make sure that the remote controller is under signal connection status (the indicator lights keep flashing). If not, the mode can not be changed.
Mobile Phone Installation on the Remote Controller
- Pull out the mobile phone holder upwards completely (Pic. 1);
- Tilt the holder 30 degrees towards you and then you will hear a click sound (Pic.2);
- Rotate and fix the support board in place (Pic. 3);
- Place your phone in the holder and adjust the mobile phone holder upward or downward to fit the size of your mobile phone (Pic. 4).
MJX APP for iOS and Android
This section introduces how to download the “MJX GPS” APP and connect with
mobile device.
FPV Real-time Image Transmission Software “MJX GPS”
Where to download “MJX GPS” APP
- For Apple iOS systems, please turn to Apple store, search “MJX GPS” or scan the QR code below to download the software.
- For Android systems, please scan the “Google play” or “MJXRC. NET” QR code or search “MJX GPS” in “Google play” to download the software.
https://itunes.apple.com/cn/app/mjx- gps/id1445507036?mt=8
http://www.mjxrc.com/down/show/3131.html
https://play.google.com/store/apps/details?id=com.mjxgps.app
How to link the “MJX GPS” to the camera
Power on the drone, then enter phone settings option. Turn on WiFi, find
drone** on the list and connect it. When “ ” legend is shown, the WiFi
connection is successful. Exit settings and tap “MJX GPS” APP on your mobile
device, then select your drone model on the home page; click “GO” to enter
into the real-time image transmission interface.
Photos
and video saving feature**
- If the camera is without SD card, videos and photos will be saved on the phone using the APP.
- If the camera is with SD card, videos and photos will be saved on the SD card.
- Videos and photos in the SD card can be downloaded to the APP.
Attention: Please make sure that your mobile device supports 5G WIFI
before linking the “MJX GPS” APP to your device.
Real time image quality and FPV distance depend on your smart phone and flight environment. To obtain the best live view, please choose a wide open area to fly in. As tested, the X103W could transmit 2K videos up to 800 meters (0.6 mile) in an environment with no interference.
Flying Your MJX X103W
This section introduces safe flight requirements and basic drone operations.
Safe Flight Requirements
- Please don’t fly the drone in bad weather conditions such as high temperature, snow, strong winds (over 15MPH), rain or fog.
- Always choose a wide open area to fly the drone. Tall structures and large metal structures may affect the accuracy of the onboard compass and GPS system.
- Keep away from people and private property. Never fly directly over people or animals.
- To minimize interference, please do not fly the drone in locations near power lines, military bases, electrical substations and broadcasting towers.
- The drone and battery performance are subject to environmental factors like temperature. Be very careful when flying the drone over 6KM (9000 feet) above sea level since the drone performance will be severly reduced.
- Your X103W cannot use GPS within the polar regions.
Flight limits and GEO zones
Abide by all laws and regulations when flying your X103W. Flight limitations
are pre-programmed into the “MJX GPS” to help users operate the drone safely
and legally. Flight limitations include altitude limits, distance limits and
GEO Zones.
Altitude limits, distance limits and GEO Zones function are implemented to
manage flight safety when operating in GPS Mode.
No-fly zone
All Flight Limits and GEO Zones are listed on MJX official website
www.mjxrc.net. The Zones are divided into different categories and include
locations such as airports, flying fields where manned drone operate at low
altitude, borders between countries, and sensitive location such as power
plants.
The drone will be banned or restricted in the no-fly zone. MJX GPS APP will
send out the corresponding warning. Please pay attention to it at all times.
Pre-flight Checklist
- The Drone battery, remote controller and mobile device are fully charged;
- The propellers are installed correctly;
- The arms and propellers are fully unfolded and secured;
- Ensure the camera lens are clean;
- Use only MJX parts or parts certified by MJX. Unauthorized parts or parts not from MJX certified manufacturers may cause malfunction causing damage to the drone, endanger the operator and others or cause safety issues.
Operating Your X103W
Signal connection between the drone and remote controller
-
Press and hold the red button “ ” and turn on the remote controller power switch (Pic. 1). The remote controller will beep twice, and the signal strength bars “ ” will be flashing; the remote controller is under signal connection status.
-
Signal connection is done once for all if the remote controller is not linked to other drones.
-
Set the connection one by one to avoid signal connection error if multiple drones are used in the same area.
Drone initialization detection
After signal connection, the drone enters into initialization detection
procedure with front and rear lights flashing red, green and yellow
alternatively. Make sure that the drone is set on a flat and still surface for
the initialization detection. The drone initialization detection takes about 8
seconds. Once the remote controller sends out 2 beep sounds and the drones
front and rear lights flash yellow alternatively, initialization detection is
completed.
Attention: Make sure that the drone is set
on a flat and still surface for the initialization detection.
Drone compass calibration
- Compass calibration should be performed after successful drone initialization detection.
- The drone compass calibration should be done before every flight. If the battery changed to a new one or the battery is reinstalled, the compass calibration should be repeated.
Two steps of compass calibration:
Step 1: Horizontal calibration
After successful drone initialization detection, the drones front and rear
lights flash yellow alternatively. Hold the drone horizontally and turn it 360
degrees along the vertical axis 3 circles. The drone front and rear lights
will change from flashing yellow alternatively to flashing green alternatively
when horizontal calibration is completed.
Step 2: Vertical calibration
Hold the drone with the camera facing up, and turn it 360 degrees along the
longitudinal axis 3 circles. The front and rear lights of the drone will
change from flashing to solid on, the compass calibration is completed
successfully.
Attention: To fly in GPS mode, please
choose an open space for the flight, and make sure that the satellite amount
is over 7.
Step 2: Vertical calibration Hold the drone with the camera facing up, and
turn it 360 degrees along the longitudinal axis 3 circles. The front and rear
lights of the drone will change from flashing to solid on, the compass
calibration is completed successfuly.
- Please do not calibrate the compass in strong magnetic area, such as magnetic field, parking garage or construction area with underground metal reinforcement.
- Please stay 10 feet away from magnetic materials (such as keys, cell phones, etc) when calibrating the compass.
- Please keep away from large metal objects when calibrating the compass.
Gyroscope calibration
After the drone and the remote controller are bound, set the drone on a flat
surface (Pic. 1), push and hold both joystick to the lower left position (Pic.
2) to calibrate the gyro. Once the drone front lights turn from flashing to
solid on, the gyro calibration completes successfully.
- The gyroscope calibration was done at the factory. Gyroscope calibration is not needed unless the drone can not exit the drone initialization detection procedure.
- Please make sure to set the drone on a flat horizontal surface when performing calibration, failure to do this will affect the flight characteristics.
How to lock and unlock the drone
- To unlock the drone: Press the red button “ ” . The motors will start rotating, the drone is unlocked.
- To lock the drone: After the drone lands on the ground, press the red button “ ” for 3 seconds, the motors will stop rotating and the drone is locked.
Warning: NEVER attempt to lock the drone by pressing the “ ” button when the drone is airborn !!! Or the drone WILL crash and be damaged.
Drone operation
Initial Flight
Basic flight operation steps
- Place the drone in a wide open area with its front facing away from you.
- Turn on the drone and remote controller.
- Connect the remote controller with the drone and then proceed the drone initialization detection.
- Connect your X103W with your phone and enter into the image transmission interface.
- Unlock the drone after the drone gyro detection is completed.
- Push the throttle joystick forward, the drone will take off; Control the drone’s flight with left/right joystick.
- Push the throttle joystick down to land the drone.
- Push down the throttle joystick and keep it at the bottom position for 3 seconds to lock the drone.
- Remove the battery from the drone and turn off the remote controller.
Video suggestion and tips
- Complete the pre-flight checklist;
- Set the camera gimbal angle to your desired position;
- Fly the drone in good weather with little wind;
- Perform test flights to establish flight routes and to preview scenes;
- Push the control joystick gently to keep the drone movement smooth and stable.
Appendix
X103W Product Specifications
Drone
Gross Weight
(Battery and propellers included)
| X103W: 246g (8.7 Oz)
Dimensions| Folded: 15010060mm (lengthwidthheight) (642.4 inch)
Unfolded: 34534560m (lengthwidthheight) (13.613.62.4 inch)
Diagonal| 255mm (10 inch)
Max Ascent Speed| 2m/s (6.56f/s)
Max Descent Speed| 2m/s (6.56f/s)
Max Speed| 22km/h (14 MPH)
Flight Height Limitation| 80m (260 feet)
Max Flight Time| 14 minutes (no wind)
Max Wind Speed Resistance| <Level 2
Max Tilt Angle| 35°
Max Angular Velocity| 200°/s
Operating Temperature Range| 0“C-40“C
GNSS| GPS
Hovering Accuracy Range| Vertical±0.5m (1.5 feet)
Horizontal±1.5m (4.5 feet)
Operating Frequency| 2.4-2.4835GHz
5.15-5.35GHz
Transmission Power (EIRP)| 2.4GHZ<20dBm 5GHz<16dBm
Gimbal
Controllable angle| Tilt: -90°- 0°
Camera
Image Sensor| 1/3 “ CMOS; Effective Pixel: 2 million
Lens| FOV: approx. 110°
Aperture: f/2.4
Shooting Range: 1m to «
ISO Range| Photo: 100-1600 (Auto)
Video: 100-1600 (Auto)
Electronic Shutter Speed| Electronic Shutter: 1/30s-1/10000s
Still Image Size| 2048×1152
Still Photography Modes| Single Shot
Video Resolution| 2K: 2048×1152
Color Mode| RGB Mode
Max Video Bitrate| Video 12Mbit/Transmission 2Mbit
Supported File System| FAT32
Photo Format| JPEG Format
| Video Format | MP4, Compressed Format H.264 |
|---|---|
| Supported SD Cards | >Class 10 Micro SD Cards (not included) |
| Operating Temperature | 0″C-40″C |
Remote Controller
Operating Frequency| 2.4-2.4835GHz
Max Transmission Distance| 800m (0.51 mile)
Operating Temperature| 0C-40C (32-100 F)
Battery| 2*AA
Transmission Power (EIRP)| 2.4GHz<20dBm
Operating Current/Voltage| 200mA@3V
Intelligent Flight Battery
Capacity| 1100mAh
Voltage| 7.6V
Operating Temperature| LiPo 2S
Energy| 8.36Wh
Net Weight| 61g
Charging Temperature Range| 5C- 40C
Charging Current| >1.5A (Max) 2A Adaptor
Charging Time| 120 minutes
APP
APP Name| MJX GPS
Image Transmission System| WIFI 5GHz
Real-time Image Transmission| 720p@20fps
Latency| 200-300ms
Required Operating System| iOS 9.0 or later
Android 4.4 or later
What Is in the Box
Package includes the following parts.
Cautions and Safety Notes
- This drone is not a toy, but a hobby grade model. It should be assembled and operated properly. Pilot must operate this drone in a safe way. Improper operation may cause injury or property damage.
- This drone is appropriate for pilots aged 14+ who are skilled with flying experience.
- Users are in fully responsible for proper operating this drone. The manufacturer distributor or dealers will bear no responsibility for damages caused by misuse.
- Keep small accessories away from kids to avoid accident.
Guidelines for Safe Flying of the X103W
Hobby grade radio control drones are considered to be the most dangerous
potential products.
Users should conform to the principle of “safety comes first”. Never fly the
drone close to airports, above crowds or in zones storing dangerous goods.
REMEMBER, you are responsibile for accidents caused by improper operation.
-
Stay away from obstacles, crowds, power lines, trees or water
Always choose a wide open area for every flight, away from people and property. Never fly directly over people or animals. Please don’t fly the drone in bad weather conditions as high temperature, snow, strong wind (≥level 5), rain or fog. Maintain a 2m (7ft) distance from the drone when taking off or landing.
-
Keep the drone in dry environment
The drone is composed of sophisticated electronic components and mechanical parts. To avoid damages on the mechanical and electronic components, please keep the drone in dry environment and use a clean cloth to wipe the surfaces and keep it clean.
-
Practice flying together with skilled pilot
Beginners are suggested to practice flying together with skilled pilot’s guidance. Do not fly alone. -
Keep proper operation and safe flight guidelines in mind
Please read carefuly the user manual before flying the drone. It contains important information on product functions and operation tips. Learn how to use the accessories, safe flight always comes first. Stay informed of and abide strictly by relevant local laws and regulations. Keep away from any no- fly zones and respect other people’s privacy. -
Safe flying
Please make sure you are in good mental shape before every flight. Fly the drone as per your flying experience. Never fly the drone under the influence of alcohol or drugs. Keep the remote controller at least 20 cm (8 inchs) away from your body when flying the drone. -
Keep a safe distance from a flying drone
Never touch a flying drone under any circumstance. Don’t approach and touch a drone on the ground if its propellers are rotating. Severe injuries may be caused by rotating propellers. -
Keep away from heat source
The drone is made of metal, fiber, plastic, electronic component and other material. Please keep it away from any heat source to avoid deformation. Never leave the drone in the sun, damage will be caused by sun exposure and high temperature. -
Environmental protection requirements
To protect our blue planet, please recycle the drone conforming to local laws and regulations.
Note:
a) Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
XIO3W Drone User Manual – Download [optimized]
XIO3W Drone User Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>