glitzhome 1010202758 Bar Stool Installation Guide
- June 7, 2024
- glitzhome
Table of Contents
Glitzhome Corporation (Shanghai), Ltd.
Assembly Instruction
BAR STOOL
Carefully unpack and identify each component before beginning assembly. Before you begin, please refer to the parts list to make sure that you have all parts. Please take care when assembling the unit and always place the parts on a clean, soft surface.
Get social with us and discover more about our products, tips, and exclusive discounts!
PRE-ASSEMBLY PREPARATION
-
CAUTION: Assembly will require at least 2 adults. DO NOT use power tools.
Please inspect all items BEFORE assembly. If for any reason you need to return this item, please kindly return it in its original packaging. -
WARNING!
1. DO NOT let any sharp objects touch or rub the surface of the product.
2. When assembling, do not let children play around the working area.
3. DO NOT tighten all bolts and screws completely until the entire unit has been assembled and set up.
4. DO NOT USE if this product becomes damaged, and/or components are broken or missing. -
CARE AND CLEANING: DO NOT scratch or chip the finish. DO NOT use abrasive chemicals for cleaning.
Clean with mild soap on a soft rag. Rinse and dry thoroughly. -
MAINTENANCE: Please periodically check all fittings and re-tighten as necessary.
kindly Reminder: Two bags of hardware separately inside the carton.
One bag for one sool to assemble.
STEP 1
Insert the Gas Lift (D) to the Base (B) as shown the below diagram.
Warning!
Please remove the plastic cap before assembly.
STEP 2
Attach the Leg (C) to the Seat (A) by using Allen Bolt (E) and Allen Wrench
(F) as shown the below diagram.
STEP 3
Insert the Gas Lift (D) to the Leg (C) as shown in the below diagram.
STEP 4
A few days after initial assembly, the product may acclimate to its new
environment. Please ensure all screws are still securely tightened.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>