CAR COMFORT 14508 5W LED Automate Car Mat Instructions
- June 6, 2024
- CAR COMFORT
Table of Contents
14508 5W LED Automate Car Mat
Instructions
General introduction
Read and keep these user instructions
These user instructions belong to this LED car mat (hereinafter referred to as
„product“). The user instructions contain important information on installing
and handling the hail protector cover.
Read the user instructions carefully, especially the safety instructions,
before using the product. Failure to observe these instructions may result in
serious injury or damage.
Keep the operating instructions safe for future use. If you pass on the
product to a third party, be sure to include these user instructions.
Explanation of warning symbols and notices
The following symbols and signal words are used in these user instructions.
Danger This signal symbol/word indicates a hazard with a high level of
risk which, if not avoided, will result in death or serious injury.
Warning This symbol/signal word indicates a hazard with a medium level of
risk, which, if not avoided, can result in death or a serious injury.
Notice This signal word warns of possible material damage.
Read the user instructions.
Don‘t put needles in it.
Protection class III device.
Package contents
- 2 LED car mats for driver and passenger side
- 1 USB connector with function key
- 1 infrared remote control with battery
- these operating instructions
Safety
Proper intended use
This product is only intended for use in passenger cars. It is intended
exclusively for private use and not suitable for commercial use.
Use this product only as described in these operating instructions. Any other
use is considered improper and can lead to property damage or even personal
injury. The product is not a children‘s toy.
The manufacturer or dealer assumes no liability for damage caused by improper
or incorrect use.
Safety instructions
Danger
Risk of death!
Incorrect positioning of this product can lock the brake, accelerator, and
clutch pedals.
→ Only use the product in such a way that the pedals in the driver‘s footwell
are not impaired
→ Brake, accelerator, and clutch pedals must always be able to be fully
depressed
Danger
Risk of death!
Even a brief distraction can lead to a car accident.
→ Do not operate the product while driving.
→ If you are distracted by the LED light, you have to switch it off.
→ The lighting effects (auto, strobe, fade, and sound) must not be used while
driving.
Danger
Risk of death!
Mixing up the LED car mats for the driver and front passenger can block the
brake, accelerator, and clutch pedals.
→ The LED car mats are only to be used in a right-hand traffic.
→ Only use the LED car mats as shown [Fig A].
Warning
Risk of electric shock!
Faulty electrical installations or excessively high mains voltage can lead to
electric shock.
→ Only connect the product to a USB port in the car
→ Make sure that the USB connection is always easily accessible so that you
can quickly disconnect the connection cable from the power supply in the event
of a fault.
→ Do not operate the product if it is visibly damaged or if the connection
cable or USB plug is defective.
→ If the connection cable of the product is damaged, it must be replaced by
the manufacturer or its customer service or a similarly qualified person in
order to avoid hazards.
→ Do not open the product; have the repairs carried out by specialists. To do
this, contact a specialist workshop. In the event of repairs carried out
independently, improper connection or incorrect operation, liability and
guarantee claims are excluded.
→ Only parts that correspond to the original device data may be used for
repairs. This product contains electrical and mechanical parts that are
essential to protect against sources of danger.
→ Immerse the product and the connection cable or plug in water or other
liquids.
→Never touch the USB plug with wet hands.
→Never pull the USB plug out of the USB port by the connection cable; always
grasp it directly.
→ Never use the connection cable as a handle.
→Do not kink the connection cable and do not lay it over sharp edges.
→Only use the product in the interior of vehicles.
→ If you are not using the product, cleaning it, or if a fault occurs, always
switch the product off and pull the USB plug out of the USB port.
Note
Risk of damage!
Improper handling of the LED car mat can damage the product.
→ Do not bring the connection cable into contact with hot parts.
→ Never expose the product to high temperatures (heating, etc.) or the effects
of weather (rain, etc.).
→ Never immerse the product in water for cleaning and do not use a steam
cleaner for cleaning.
→ Stop using the product if it is cracked, cracked or deformed. Only replace
damaged components with suitable original spare parts.
→ Do not insert needles or pointed objects into the product.
→ Do not operate the product near heat sources, open flames such as candles or
in direct sunlight to avoid overheating.
→ During operation, make sure that the USB plug is firmly inserted in the USB
port and that it is free of dirt. If there is insufficient contact between the
USB plug and the USB port, the vehicle vibration can ensure that the power
supply switches on and off at short intervals.
→ Do not switch on the product when it is folded or pushed together.
→ Do not place heavy objects such as suitcases on the product
Use
Warning
Risk of injury!
Improper handling of the product can lead to injuries and damage to the
product.
→ Before commissioning, make sure that the USB plug and the connection cable
are dry.
→ Do not kink or fold the product and keep it away from water and other
liquids.
→ Do not use the product in the vicinity of open flames or other heat sources
such as strong sunlight.
→ Check the product regularly for wear and damage. If there are any signs of
this, the product has been used improperly or has stopped working, stop using
it. Return the product to the dealer or dispose of it properly
Operate the product
Warning
Risk of injury!
Improper assembly of the product can lead to injuries.
→ Place the product in the footwell of the car and make sure that the brake,
accelerator, and clutch pedals are not impaired.
Function control on the USB connector using the function key
Press 1x (switch on) and the color red
Press twice color green
Press 3x color yellow
4x press color blue
5x press color pink
6x press color purple
7x press color cyan
8x press color white
Press Strobe Mode 9 times
Press Fade Mode 10 times
Press for 3 seconds – Music mode – LED strip reacts to ambient noises, such as
music, with changing colors.
Pressing for 5 seconds turns the light off
Function control with the infrared remote control
cleaning
Note
Risk of short circuit!
Water that has penetrated the product can cause a short circuit.
→ Never immerse the product in water.
Note
Risk of damage!
Improper handling of the product can lead to damage.
→ Do not use aggressive cleaning agents, brushes with metal or nylon bristles,
or sharp or metallic cleaning objects such as knives, hard spatulas, and the
like. These can damage the surfaces.
→ Never put the product in the washing machine.
- Before cleaning, pull the USB plug out of the USB port.
- Wipe the product with a slightly dampened cloth.
- Then let all parts dry completely.
Maintenance
There is a battery in the infrared remote control that can be replaced.
Storage
- Store the product in a clean and dry place.
- Keep the product out of the reach of children.
- Avoid bending the product during storage by placing heavy objects on it.
- Do not weigh the product down with heavy objects.
Technical specifications
Power: 5W
Voltage: 5V
Protection class: III
Battery: CR2025
Declaration of conformity
The EU declaration of conformity can be requested from the manufacturer.
Disposal
If the product can no longer be used, every consumer is legally obliged to
separate old devices from household waste, e.g. at a collection point in his
municipality/district. This ensures that old devices are used correctly and
negative effects on the environment are avoided. That is why electrical
devices are marked with the above symbol.
Dispose of the packaging according to type. Dispose of cardboard as waste
paper and foils in the recyclable material collection.
Service and Support
If you have any questions on the product please contact: office@walsergroup.com
A
Walser GmbH
Radetzkystraße 114
6845 Hohenems
Österreich
www.walsergroup.com
www.walser-shop.com