Ekoo Electronic HT-K350 2.2 CH Soundbar User Manual

Ekoo Electronic HT-K350 2.2 CH Soundbar

Thank you for purchasing this Sound Bar, Please read this instruction manual carefully before using this product.

Safety Instructions

Before using this device, please read the following safety instructions and follow all the safety precautions. Read this instruction manual carefully and keep it in your possession so long as you possess the device. Any operation inconsistent with these instructions may result in damage to this device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Matters Need Attention

1. Don’t put this product under high temperature wet environment and it will be worse when it is in the rain or crash strongly.
2. To reduce the risk or electronic shock or fire, do not remove the cabinet cover simply contact a service professional.
3. .ln the rear occurrence of malfunction, do not attempt to repair the unit on your own. Contact a certified service professional for a proper diagnosis and repair
4. If fragments or liquids fall into device box, please cut off the power right away. And it can be used only after professional staff checks it.
5. Don’t install the unit in or near a place where it may come in contact with rain, moisture or other liquids.

Technical Specifications and Features

2.0, AUX (3.5mm),DC IN
Bluetooth version:| 5.0+EDR| Power supply:| 21V 3A
Bluetooth range:| Up to 10m| Dimensions:| 37.8 4.7 2.8 inches
Speaker drivers:| 2″/1OW speakers 4 + 3″/25W subwoofer 2 + Air tubes *1

Accessories

Connections

HDMl(ARC): Use to connect compatible devices using a HDMI cable (not provided).
OPTICAL IN : Use to connect compatible devices using an optical cable (provided).
USB IN: Use to connect a flash drive for direct
MP3/WAV playback (FAT32 format and 64GB max).
AUX IN: Use to connect compatible devices using the 3.5mm – 3.5mm stereo jack cable (provided).
DC IN: Use to connect the power supply (provided Adapter).

LED display

Remote Control

Next track

| JD| ****

3D Surround on/off

---|---|---|---

BT

| Shifting into BT Mode. In BT mode .hold to enter paining mode| ****

MODE

| Shifting between BT/USB/AUX/OPTICAL/ COAXIAL/HDMl(ARC)
BASS+| Increase the Bass| USB| Shifting into USB Mode
BASS-| Decrease the Bass| AUX| Shifting into AUX Mode
OPT| Shifiting into Optical in Mode| HDMIARC| Shifting into HDMl(ARC) Mode
EQ| ****

Shifiting to different EQ

| 0| USB Repeat modes

Control panel keys

1. Power ON/OFF
2. INPUT MODE
3. Volume turning down/ Previous track
4. Pause /Play
5. Volume turning up/ Next track

Input Functions

• Power on/off: Press the Power on/off button on the remote control or soundbar control panel to turn the unit on and off.•
• HDMl(ARC): Connect an HDMI ARC compatible device to the HDMl(ARC) port on the soundbar using a HDMI cable (not supplied). Select HDMl(ARC) mode either by pressing the HDMl(ARC) button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until ARC is displayed on the LED display. Ensure HDMI ARC is selected as the TV’s audio output, then adjust the volume of sound bar using the Volume up and Volume down buttons on the remote control or soundbar control panel
• AUX in: Connect a compatible device using the 3.5mm – 3.5mm stereo jack cable. Select AUX mode either by pressing the AUX button on your remote control or repeatedly pressing the MODE button on the soundbar control panel until AUX is displayed on the LED display. Ensure the connected device is producing an audio signal, then adjust the volume of soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.
• Optical in: Connect a compatible device to the OPTICAL input on the soundbar using a digital optical cable (supplied). Select OPT mode either by pressing the OPT button on your remote control or repeated­ly pressing the MODE button on the soundbar control panel until OPT is displayed on the LED display. Ensure Optical SPDIF is selected as the TV’s audio output, then adjust the volume of the soundbar using the Volume up and Volume down buttons on the remote control or soundbar control panel.
• Bluetooth: Press the BT button on the remote control or repeatedly pressing the MODE button on the soundbar control panel until bt is shown on the LED display. The LED display will flash to indicate that the soundbar is in Bluetooth pairing mode. Ensure that the device you wish to connect is also in pairing mode and search for “AN FLAG HT-K350” in its device list. When the two devices are paired, the LED display on the sound bar will stop flashing and remain constant. (The sound bar will now automatically re-pair with this device whenever it is within range and has Bluetooth turned on.)
• USB media mode: The soundbar is compatible with USB flash drives of up to 64GB(Fat32 format) in size and can play MP3 and WAV audio files directly. Simply insert a compatible drive into the USB port on the back of the soundbar and the unit will automatically switch to USB mode and play the first compatible track.
  USB repeat mode (also accessed via the remote control) enables single track repeat (ONE), all track repeat (ALL)
  The media player also has a memory function that will recall and continue from the last-played point when a USB flash drive that has previously been used with the soundbar is reinserted.

Warranty Policy

1. Within 90 days from the day after you sign for the product, if the product has performance failure.you can enjoy free replacement or maintenance service ;
2. Within 1 year from the day after you sign for the product, if the product has performance failure, you can enjoy free maintenance service.

Non-Warranty Regulation

1. Unauthorized maintenance, misuse, collision, negligence, abuse, liquid injection, accident, alteration, incorrect use of non-product accessories, or tear, alter labels, anti-counterfeiting marks;
2.  Exceeded the validity period of Warranty;
3. Damage caused by force majeure;
4. Not conforming to performance failure;
5. The performance failure of the product is caused by personal reasons.
   Customer Service
   We will try our best to help you solve any problems you may experience with our product.
   For FAQs and more information, please contact our after-sales Email below.
   Email: soundbar@anflag.hk

FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>