EYESUN OEM KDC-0006 Children’s Toy Walkie Talkie User Guide
- June 6, 2024
- EYESUN OEM
Table of Contents
CHILDREN’S TOY
WALKIE TALKIE
3+ FOR AGES
WARNING: CHOKING HAZARD-Small parts Not for children under 3yrs.
MAME IN CHINA
Operation Instruction of Interphone
Introduction to functions
LCD display panel
Standard accessories
Operation guide
Setup menu
-
Keep a press of for abaut 3s to power on, and then, keep a press of for about 3s to power off.
-
When the device is power on, press [OK] key to enter “channel” setup menu. At this time, the channel number on the display screen will flash, and then, keep a press of [ ] key to select the number. After setup, press [ ] key for twa times to save and exit the setup menu.
-
Or. press [OK] key for two times to enter the secondary menu “group cade (CTCSS)” for setup. At this time, the group code (CTCSS) iran on the display screen will fiash, and then, press[ ] key, s0 that selection of group code (CTCSS) can be conducted. 01-99 group(s) can be selected. OF is to close the group.
After setup, press [ ] key for two times to save and exit the setup menu. -
Or press [OK] key for three times to enter the secondary menu of VOX” for setup. After that, press [ ] key to select. There are three sensitivities for selection. OF is close After setup. press [ ] hey for two times to save and exit the setup menu.
-
Or press [OK) key for four times to enter the secondary menu of “call sound selection” for setup. Press a/v] key to setect. And you can select the first to the tenth call sound. After setup, press [ ] key for two times to save and exit the setup menu.
-
Or press [OK) key for five times to enter the secondary menu of “keypad tone” for setup. Press [ ] key to select. When ON is selected, the keypad tone will be enabled; when OF is selected, the keypad tone will be disenabled. After setup. press [ ] keyfor two times to save and exit the setup menu.
-
Or press [OK] key for six times to enter the secondary menu of “tone for emission completion” for setup, Press [ ] key to selection, When ON is selected. the tone for emission completion will be enabled: whan OF is selected, the tone for emission completion will be disenabied, After setup, press (d ] key for two times to save and exit the setup menu.
-
Or press [OK] key for seven times to enter the secondary menu of “alarm clock” to select a mode. Press [ ] key to set. There are 01-24 hour(s) for selection. When OF is selected, the alarm clock is disenabled. After setup, press [ ] key for two times to save and exit the setup menu.
-
Or press [OK] key for eight times to exit setup menu.
Power on and power off the interphone
Keep a long press of [ ] key for about 3s, there is s sound of toot, and the display screen is on, indicating that the device has been powered on. Keep a long press of [ ] key for about 38, there Is. sound of “toot”, and the display acreen is off, Indicating that the device haa baen powered off.
Emission and receiving of sound by interphone
Note
Before communication, the channels of the tegen members and groups have tobe
the same.
For setup of channel and group. please refer te point 2 and point 3 in “setup
menu” of previous page.
- Press [ ] key for two times to Cail the members in the group.
- Hold [ ] key to speak to the meenbers in the group, After speaking, release.
- After other members reply, pros: [ ] kay again to speak to other members.
- In case of multiple groups, ewitching of group for communication can be conducted.
- During communication, the emission tower loon on the screen [ ] will be on.
Adjustment of intercom volume
Press [ ] key to turn up the volume, and press [ ] key to turn down the
volume.
Thare are 8 levels of volume,the lowest level is “I” the highest level is
Battery life mark
The battery mark displayed on the diaptay ecreen indicates the battery life in realtime. “ ” means full battery life, and “ ” “means low battery life.
Note
When the battery life mark is “ ” ‘it means the battery life is extremely low
at this time, there may be noise, and the device may power off at any time.
Timely charging is required.
Product features
Interference elimination (CTCSS)
Interference elimination code can eliminate the interference of the same
channel maximumly, and it aiso provides multiple selection for you. Refer to
poet 3 of “setup menu’ for the specific mathads for setup.
Repetition of this process can set different combinations for each channel.
If CTC8S function is set for one channel, other calls of different group code of the same channel can be ignored.
TOT (time-out timer)
The function of time-oul timer is to prevent lang-lime channel occupation and
too lang continuous emission duration of the interphone, the device wil be
healed, therefore. So, TOT limited duration is set.
During use, when the duration of continuous emession of signal exceeds 180s,
trne-oul will be determined, at this tne, the interphone will stop emission
automatically to retease the ocoupied channel and avoid the body from being
heated.
At this time, loose [ ] key and than press. [ ] key, emission can be
recovered.
Sat and send ringtone
You can set the ringtone that you live nn the interphone and send the ringtone
to the members in the group to fascinate the members to identify your
callings.
Refer to point 5 of “setup manu” for the specific methods of operation
VOX function
After VOX function is enabled. during communication, continuous communication
with the members in the group can be achieved wanout holding [ ] key. just
like the hands-free function of mobile phone.
Refer to paint 4 of “setup menu” for the specific methods of operation.
Note
After VOX function is enabled, the product is under long-time emission and
regaining status, the power consumption of the ’ machine will greatly enlarge,
the battery Ife of the device will be shortened, Please be careful to use this
function.
Scan
Scanning function is used to monitor the channel for transmission or scan
the channel of the interphone of the opposite parties.
Keep a long press of [ ] key, the screen will display the scanned channels.
When the signal of channel is scanned, scanning will be stopped. You can hear
the sound of the current channel. At this time, press [ ] key, communication
can be conducted on this channel.
Tips: During scanning, pressing of [ ] key can change the direction of scanning.
LED flashlight
The LED flashlight of this product can be used for supplemental lighting
within a small scope. When the device is powered on, press [ ] key, the LED
flashlight will be powered on, press again, the LED flashlight will be powered
off.
Alarm clock “ ” function
This product is equipped with alarm clock function. Refer to point 8 of
“setup menu” for the specific methods of setup. After the alarm clock is set,
the display screen will show the mark of “ “
Note
The set alarm clock is only available for this time. After the device is
powered off, the alarm clock will be invalid automatically. The time set for
the alarm clock is calculated after the time when the alarm clock is set,
therefore, it will not synchronize to the daily clock.
Keyboard lock function
To avoid accidently change of interphone setting, this product is equipped
with the function of keyboard lock. Keep a long press of [OK] key for about
3s, a” ” icon will be displayed on the screen, and there will be a sound of
“toot”, indicating that the keyboard has been locked, setting, volume increase
and volume decrease cannot be done in menu.
After the keyboard is locked, only [ ] key and [ ] key can be used.
Unlocked: Keep a jong press of [OK] key for about 3s to unlock the keyboard,
the” [ ] “icon in the screen will disappear, and there will be a sound of
“toot”, indicating that the keyboard has been unlocked.
Battery charging
When the battery mark on the display screen is “ “, it means the product needs
to be charged.
During charging, please connect the USB cable to the charging port at the
bottom of the product. During charging, “ ” will flash, indicating the device
is being charged. When the device is fully charged, the battery mark “ ” on
the screen will stop flashing.
When the product is powered on or powered off, this product can be charged.
Main technical indexex
Frequency| 462.5625MHz-462.7250MHz
467.5625MHz-467.7125MHz
---|---
RF OUTPUT| ≤0.5W
Working voltage| 3.3V~4.2V
Communication distance| 1~3km (depending on the geographic position and
environment)
Encryption| CTCSS, DCS
Channel number (simplex)| 22
Frequency stability| +5ppm
Charging input| DC5V 1000 mA
Battery capacity| 400mA/h
User safety information
To safely and effectively use this product, please read the following information.
- Before entering inflammable and explosive places, please turn off the power supply of the walkie-talkie. It is forbidden to charge in inflammable and explosive environments.
- In order to use the product safely, the product can not be used under the charging state.
- DO NOT use the interphone whose antenna has been damaged, making the damaged antenna cable touch skin may cause slight burning.
- The interphone can only be repaired by professional technicians, DO NOT disassembly without permission. DO NOT disassembly without permission.
- To avoid the problems caused by electromagnetic interference/electromagnetic compatibility, please power off the interphone in the place with the mark of “no interphone”.
- This interphone is not waterproof, please keep it dry.
- DO NOT expose this interphone to direct sunlight or heat source for a long time.
- During emission of this interphone, keep this interphone vertical, and get close to the interphone.
If you carry the portable interphone, please ensure that, during emission, the interphone is at least 5cm to body.
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Consult the dealer or an experienced radio/TV technician for help.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, incl uding interference that may cause undesired operation.
Safety Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Your wireless handheld portable transceiver contains a low power transmitter. When the talk bottom is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate at a duty not to exceed 50%. For body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with manufacturer accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could damage the transmitter and may violate FCC regulations. Hold the transmitter approximately 2 inches (25mm) from your face and speak in a normal voice, with the antenna pointed up and away.
- This product contains small parts that children can use under parental support;
- Do not swallow parts lanyards need to be installed by adults;
- Donot bend, pull or fold the parts.
- Do not throw parts at people or other objects;
- The package contains important information that must be retained;
SCHEUFER Technologies GmbH
Hertleinstrasse 37 ,91052,Erlangen,Germany
Tel +491631711818
VISHTEC UK CO.,LTD
UNIT G25 WATERFRONT STUDIOS,
1 BOCK ROAD,LONDON,UNITED KINGDOM,E16 1AH;
Tel:+44 20 3286 4115
SHENZHEN DELANDA TECHNOLOGY CO., LTD.
6th Floor, Building 1, Zhongkenuo Industrial Park,
Hezhou, Xixiang, Baoan, Shenzhen, China 518126
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>