Powervision Tech PVS10 S1 Explorer Kit Handheld Smartphone Gimbal User Manual

Compliance Information File

Matria code| 70100094-01 v2.0
DESIGNED FOR| PVMG10
SIZE| 153mm*114mm
Color| 1c
DESIGNED| yuki,lui 2021.05.31
SHEET| 02-Feb

Compliance Information

FCC Compliance Information
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ina particular installation. If this equipment does cause harmful interference to radio or television  reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End-user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

ISED Compliance Information

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF Exposure Information

This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0 cm between the radiator and your body.

EU Compliance Information

Hereby, Powervision Tech Inc. declares that the radio equipment type PowerVision 51 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://support.eu.powervision.me/sup-port/home.

TELEC Information

CAUTION
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Environmentally-friendly disposal
Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.

Specifications

Powervision $1

Model| PVS10
Folded Dimensions| 141.5 x 58.4 x27.9mm
Unfolded Dimensions| 258.5 x 58.4 x59.3mm
Weight| 298g
Compatible Payload Weight| 220240g
Compatible Phones Length| 164mm Max.
Operating Frequency Range| 2402~2480MHz
Max e.i..p| <6.2dBm
Battery
Type| Li-ion
Energy| 15.86Wh/1030mAh 15.4V Capacity equal to 4120mAh 3.7 V
---|---
Max Working Time| 15 hrs Under ideal conditions with the gimbal fully balanced.
Charging Time| 2hrs * Measured with a 18W charger
Working Temperature| 0-40C
Charging Temperature| 5-40C
Max Charging Power| 18W, 5V/3A 9V/2A 12V/1.5A
Charging Output
Wireless Output| 10W Max.
USB-C Output| PowerOff: 18W Max. — PowerOn: 5W Max.
Wireless
Model| BLES.O ao

7010094-01 V2.0
402GAAW10100001

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>