Shenzhen Aintel Technologies CP500 Smart Body Worn Camera User Manual
- June 6, 2024
- Shenzhen Aintel Technologies
Table of Contents
Shenzhen Aintel Technologies CP500 Smart Body Worn
Camera
Product Introduction
Status Indicator
LED Operation Indicator Light
LED Charging Indicator Light
Unpacking and Checking
Install a Nano SIM Card
As shown below, please take off the cover and unlock the SIM card slot, and
put Nano SIM card into it and then lock it again.
Install and Remove the Battery
Prior to assembly, please aim at the slot on the device, make the battery
protruded contact portion to accommodate the device by pressing the bottom of
the battery and then lock the battery by sliding the locking button as the
shown operation in sequence in the following figure.
As shown below, please take off the cover and unlock the SIM card slot, and put Nano SIM card into it and then lock it again.
Caution
Please be sure to use our original battery. Danger of fire or explosion may be caused if a Non-original battery is used or the positive and negative poles are swapped over.
Battery Charging
Method 1: by USB cable
- Plug the adaptor into the power socket.
- Connect the device with the adaptor by Mini USB cable and then enter into the charging mode if the indicator light turns red.
- The indicator will light green when the device is full charged.
Method 2: by Specified Charger (Optional)
- Connect the charger with the power supply by he Type-C cable，make the cable loop with a counterclockwise rotation and then connect the adaptor through the lead groove as the following shown， and the indicators of both terminal slot and battery slot on the charger light green.
- Put the device with the battery into the terminal slot as shown below, and then the indicator turns red to be in charging.
- An extra battery could be put into the battery slot concurrently, and charged if the indicator turns red.
- The indicators would light green when the charging is completed.
Getting Started
Switch On
Press the power button for 3 seconds under shutdown to power on.
Switch Off
Press the power button for 3 seconds, enter into the shutdown interface and
then tap the shutdown option to power off.
Install and Remove the Belt Clip Bracket
- Align the slot on the top of device with the clamp on the bracket, and push the device down with a click to complete the installation as shown below.
- Insert the belt clip from left to right as shown in figure 3 and fasten it to the undercuts. 360° rotatable design of the belt clip makes a high wearable satisfaction.
- Hold the device with one hand, push the right undercut of the bracket with the other hand, and take the bracket off with the arrow direction as shown below.
Video Recording
In the camera preview, slide the video recording switch downward to start the
video recording and upward the switch to stop it.
Photo Taking
In the camera preview, short press the photo taking button to enable it.
Platform Login
The registration on Intelligence dispatch Network server is necessary to make
this product to have the multiple functions like PoC PTT calling, Video
Uploading, Position Transmitting, and Instant Messaging.
- Click on the icons as Logout, Worktable, PoC Trunking, Message, Address Book, to log on the platform.
- Click the button More to set up the server IP, communication port and data port.
- Click the button Confirm to save the settings and return to the login interface.
- Please make sure 4G and WiFi connection is working, input the account and password to login. The members ID, groups and online status will be shown on the homepage.
Caution
Account and password will be provided by the system administrator. PoC PTT calling, Video uploading, Position Transmitting, Instant Messaging, Job Ticketing, Alarming and Geo-fencing could be enabled after a successful login.
PoC PTT calling
- Enter into groups, and press PTT button to make a call on the current group. Release the PTT button to make the call over.
- Or, Click PoC trunking, and then press PTT to have a group call.
- Or, Click on the icon as shown on the top right corner and select different groups to call.
- Or, Click Address Book, and tick the user/users to make the individual call or dynamic group call.
Video Upload
1.Click on the icon on the homepage to upload the current video information to the dispatcher.
2.Or, the video could be uploaded by an upward pulling with a silent
transmission command on the dispatcher.
Enable the Emergency Alarm
Long press the programmable button which is programmed as the Emergency button
(the default orange one), to enable all the on-site information including
real-time audio and video, location, and terminal ID to be uploaded to the
dispatcher automatically, and send a beep alarm to the dispatcher and all the
members in the same group.
Disable the Emergency Alarm
Long Press the Emergency button to cancel it in the Emergency Alarm status. To
get more features and operation details, please contact us
sales@aintel.cn
FCC WARNING
Absorption Rate (SAR) information:
This device meets the government’s requirements for exposure to radio waves.
The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluations of
scientific studies. The standards include a substantial safety margin designed
to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6
W/kg averaged over one gram of tissue. This device was tested for typical
body-worn operations with the back of the device kept 10mm from the body
without belt clips, 0mm from the body with the belt clips, 25mm frrom the
face. To maintain compliance with FCC RF exposure requirements, use
accessories that maintain an appropriate separation distance between the
user’s body and the back of the device. The use of belt clips, holsters and
similar accessories should not contain metallic components in its assembly.
The use of accessories that do not satisfy these requirements may not comply
with FCC RF exposure requirements and should be avoided. Use only the supplied
or an approved antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>