Kmart 43040421 Gaming Switch Charging Case User Manual
- June 6, 2024
- Kmart
Table of Contents
Kmart 43040421 Gaming Switch Charging Case
Warnings and cautions
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery at an extremely high temperature in a surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- The apparatus shall not be supplied by a power source exceeding PS1 (i.e. 5Vdc 3A).
Product
- Snap joint
- USB-C output
- Adjustable stand
- On/Off button
- LED Power indicator
- USB-C input
- USB-A output
- Joy-Con Grip
- Card slot
- Joy-Con Release button
**How to charge the Charging case
**
As shown below: Charge the Charging Case with USB-C cable and standard charging adaptor. During charging, the LED indicator lights will go on and blink with the power increase. The case is fully charged when the fourth LED light is on without blinking.
- 1 LED on: 10%-25% charged
- 2 LEDs on: 25%-50% charged
- 3 LEDs on: 50%-75% charged
- 4 LEDs on: 75%-100% charged
How to charge the Nintendo Switch
- Fix the Switch into the Charging case, make sure the charging port is well mounted to the USB-C connector of the case, close the snap joint.
- The charging process is automatically started after the connection. The LED charging indicators of the case are on according to the power level.
- The Switch is fully charged when the power indicators of the Switch are all on without blinking.
Product Features
The Charging case is super slim with a 5,000mAh battery built-in, offering the Switch 2-5.5 extra hours of use. The back stand is robust and angle adjustable. Besides, to improve the grab feeling of the Switch. We provide the option of a pair of Joy-Con grips.
Product Specification
- Battery type: LI-polymer
- capacity: 3.7V/s,ooomAh
- USB-C input SV=2A
- Charging time: 2-3.5 H
- USB-A output: 5V=2AMax
- or USB-C output: SV= 2AMax
- Size: 26812637±0.5mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>