SPREE 23863 Wireless Earbuds with Microphone User Manual
- June 6, 2024
- SPREE
Table of Contents
SPREE 23863 Wireless Earbuds with Microphone User Manual
SPREE WIRELESS EARBUDS
User Manual
Note: For the best performance and to prevent any damage or misuse please read all of the information carefully prior to using the device.
Specifications
Bluetooth Solution: V4.1
RF Range: 10 meters
Battery Capacity: 3.7V/80mAh Lithium
Playing Time: 3-4 hours
Charging Time: 30min.
Standby Time: 50 hours
Supports: HSP, HFP, A2DP and AVRCP/Hands-free
Charging Interface: Micro USB
How to Use
Charging
-When charging, the LED will be solid red light.
-When charging is complete, LED will turn off.
Low Battery
-When battery is running low, a low battery alert will play.
-If the battery is not charged, the headset will turn off.
Pairing
Before using the headset for the first time, you must pair it with the device.
Easy Pairing (First Time Pairing)
-
Turn your headset on.
Once the headset is on, it will automatically enter pairing mode.
A blue LED indicator will start flashing. -
On the device you wish to pair, find the list of Bluetooth devices and “Search for” or “Add” new devices.
Select “SPREE” from the list of devices.
If asked for the Pass/Pin code, please enter 0000 (4 zeros).
* Note: if your phone supports Secure Simple Pairing (SSP), you will not need to enter any code. -
Once the devices are paired, you will hear a message and only the blue LED will flash
-
Some phones might ask for permission to access the phone· contacts list. If you receive a message from your device, please select “OK” or “Allow access”.
Auto Reconnect
If the headset is turned off (either accidentally or intentionally) while
connected to a phone, the headset and phone will reconnect when the “SPREE”
headset is turned back on while in range.
Out of Range
– If the paired devices are separated by a range of 33 feet ( 10 Meters) or
more, the headset and phone will disconnect.
– If the headset and phone do not automatically reconnect when They are back
within the required range, select “SPREE” On the list Of devices with
Bluetooth® technology on your mobile phone to reconnect manually.
– It is possible to use these functions only when your phone supports them.
For further information about using these features, please consult your
phone’s user manual.
Controls
Answering a Call
-When there’s an incoming call, the headset will ring.
-Briefly press the “Call” button to answer the incoming call.
-You can also double press the “Call” button to decline the incoming call.
Ending Call
While in a call briefly press the “Call” button.
Last number Redial
Double press the “Call” button to redial the last number you called.
Audio Streaming
-Play: Briefly press the “Play/Pause” button.
-Pause: While playing music, briefly press the “Play/Pause” button.
-Next song: Briefly press the”+” button.
-Previous song: Briefly press the”-” button.
-Volume up: Press and hold the”+” button.
-Volume down: Press and hold the”-” button.
is distributed by CJ Global Inc.
All rights reserved. 201 0 Maple Ave Fair Lawn NJ 07410
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by CJ Global Inc is under license. Other trademarks and trade names are those of their respective owners.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference, received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s).