POSTURE360 210805 PostureSense Wearable Device User Guide

POSTURE360 210805 PostureSense Wearable Device

Product overview

This product is a wearable device that is inserted into a dedicated shirt or dedicated band.It measures the user’s posture changes in real time and alerts them with vibrations when bad posture is detected.
Users who receive notifications can correct their bad posture and form good posture habits.

Composition

PostureSense Components

• Sensor (Main Device)
• Band (Sensor Band)
• User Guide

Name of Each Part

How to use

Power on/off

• To turn the PostureSense On press the sensor’s power button.
• It will vibrate once and the LED will start blinking. The sensor is now On.
• While the sensor is On the red LED light keeps blinking.
• If you press and hold the power button for more than 2 seconds, the sensor vibrates twice, the LED light blinks twice then it switches off.
• After 2 minutes of not being used (sensor placed horizontally), the sensor will vibrate 3 times, and will automatically turn off after an additional 1 minute.

Recharging

1. When recharging, take the sensor out of the band and connect a USB-C cable to the charging port. (USB-C cable is not included in the pack)
2. While charging the LED light blinks.
3. When charging is complete, the LED light stays on without blinking.
   Fully charge the battery before using the PostureSense for the first time.

PostureSense usage

1. Wear the PostureWear shirt.
2. Insert the sensor into the back of the band’s fixed frame with the sensor’s charging port facing down.
3. Insert the band of the sensor into PostureWear’s sensor pocket in the front.

Installing Posutre360 App

1. Search and download the Posture360 app from the app store.
2. Install, launch the app and sign up.
3. After registration is complete, follow the instructions in the app to link your PostureSense with the app.

Cautions and Safety

Safety precautions

• PostureSense uses electricity so if an inappropriate method is used it might cause injury.
• Posturesense is not a medical device and is not intended to diagnose, treat, or prevent disease.
• For people with related medical conditions, if you think that using
• posturesense will affect you, please consult your doctor.
• When the vibration notification is disturbing from what you are doing please refrain from using it as much as possible, as the data is not accurately measured.
• Posturesense is not waterproof, so avoid contact with moisture and be careful not to let water in.
• To prevent damage to the product and shortening of the battery life, please observe the proper operating temperature and storage temperature (-10°C-45°C).

Notes on the built-in battery
The built-in battery is not user-replaceable, and applying heat or forcibly opening the sensor module’s lid will void warranty service and may expose you to risk.

FCC Rules

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with the FCC RF exposure requirements.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>