Xiamen Youyichuang Technology W1299 Alarm Clock Instructions

Xiamen Youyichuang Technology W1299 Alarm Clock

Alarm Clock Instructions

Can’t charger phone no longer，send wrong color or any other problems, pls contact us On Amazon or by email for a new replacement.
Our email : nicetwoclock@outlook.com

Important:

If nothing shows on the display when plugged in , please slide the knob toward “ +” Knob:

Wireless charging：

Setting:

Brightness Setting

1. In the normal display mode, slide the knob to adjust the brightness.
2. Slide the knob to ‘+’ to increase the brightness, and to ‘-’ to decrease the brightness.
3. Brightness range. (0%-100%)

2.12 /24 Setting
Press “12/24” button to select 24-hour or 12-hour display mode(default 12-hour clock). When 12-hour clock is selected, the AM or PM icon will be displayed.

Time Setting

1. Press the ‘TIME’ button to enter the time setting menu, and then slide the knob to select the year.
2. After selecting the correct “year”, press the ‘TIME’ button to comfirm and next
3. Slide the knob to select the correct “Month” Value and “Date ” value, press the ‘TIME’ button to comfirm and next (picture above means July,1)
4. Slide the knob to select the“Time”,press the ‘TIME’ button to comfirm . Time setting finished. Attention: to exit setting mode ,stop pressing for 10 secs,and it will return to time display automatically

Alarm Clock Setting(Same setting method for AL1 andAL2)

1. Press the ‘AL1’ button to enter the AL1 alarm clock setting menu.
2. Slide the knob to select correct “ Alarm Time” of AL1. Press “AL1”button to comfirm. (pay attention to the AM and PM, If it is 12-hour mode )

Alarm Switch Setting

1. OFF: Turn off alarm clock
2. MON-FRI: Alarm clock is on when it is Weekday(Monday-Friday)
3. ON: Alarm clock is on everyday

Volume Adjustment Setting

1. Press the ‘VOL’ button to enter the volume setting menu, and then slide the knob to adjust the Volume.
2. Slide the knob to ‘+’ to increase the volume, and to ‘-’ to decrease the volume.
3. Press “VOL” button to confirm setting .

Temperature Setting

Press the“℃/℉”button to switch the ℃(Celsius) or ℉(Fahrenheit)

Snooze Function

1. When the alarm rings, press any button to get 9-minute snooze.
2. If you want to end the alarm clock, please press any button two times.
3. The alarm symbol will flash after the alarm enters snooze mode.

Reset

Use a needle or little stick to push the “RESET” hole to reset all settings.

Warranty

We offer a 90days money back guarantee and 366 days free replacement. If you product have any problem.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>