trulli JAM5 Portable Speaker User Guide
- June 5, 2024
- trulli
Table of Contents
- Important Safety Instructions
- WARNINGS/CAUTIONS:
- REGULATORY INFORMATION
- GETTING STARTED
- TRULLI JAM5
- Getting Started
- Placement guidelines
- Connecting to power
- Operating your JAM5 speaker
- BLUETOOTH® TECHNOLOGY
- STATUS INDICATORS
- STATUS INDICATORS
- Pairing two JAM5s together
- CARE AND MAINTENANCE
- Limited warranty
- Technical information
- TROUBLESHOOTING
- Resetting your speaker
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JAM5 Portable Speaker
User Guide
Read, keep and use all safety instructions
Important Safety Instructions
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, objects have fallen into the apparatus, do not operate normally, or have been dropped.
WARNINGS/CAUTIONS:
This symbol means there is an uninsulated, dangerous voltage within the
product enclosure that may constitute a risk of electrical shock.
This symbol means there are important operating and maintenance
instructions in this guide.
This product contains magnetic material. Consult your physician on whether
this might affect your implantable medical device.
- Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.
- Do NOT make unauthorized alterations to this product.
- Do NOT use a power inverter with this product.
- Use this product only with the power supply provided.
- Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
- Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
- The product label is located on the bottom of the product.
REGULATORY INFORMATION
Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Trulli Audio might cause harmful interference and void the FCC authorization to operate this product. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an output on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product complies with FCC & Industry Canada’s RSS-102 radiation exposure limits set forth for an uncontrolled environment
This device complies with Part 15 of the FCC Rules and Innovation, Science and
Economic Development Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference. and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC ID: 2AXEJJAM5
IC: 26435-JAM5
Model: JAM5
Input: 15V / 2A
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numériqué de la classe B est conformé à la norme NMB-003 du Canada.
This device complies with FCC and Industry Canada radiation exposure limits
set forth for the general population. This equipment should be installed and
operated with a minimum distance of 2 cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
DO NOT attempt to remove the rechargeable lithium-ion battery from this product. Contact your local Eagle Acoustics retailer or other qualified professional for removal.
Please dispose of used batteries properly, following local regulations. Do not
incinerate.
This symbol means the product must not be discarded as household waste and
should be delivered to an appropriate collection facility for recycling.
Proper disposal and recycling help protect natural resources, human health,
and the environment. For more information on the disposal and recycling of
this product, contact our local municipality, disposal service, or the shop
where you bought this product.
Please complete and retain for your records
The serial and model numbers are located bottom of the speaker.
Serial number:
Model number:
Please keep your receipt with your owner’s guide. Now is a good time to register your Trulli Audio product. You can easily do this by going to http://TRULLIAUDIO.com/register
U.S. Phone Number: 1-877-932-3245
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth® SIG, Inc. and any use of such marks by Eagle Acoustics
Manufacturing LLC DBA Trulli Audio is under license.
©2020 Eagle Acoustics Manufacturing LLC DBA Trulli Audio. No part of this work
may be reproduced, modified, distributed or otherwise used without prior
written permission
GETTING STARTED
What’s in the box?
TRULLI JAM5
USB Type-C Cable | USB Type-C wall charger |
---|
Getting Started
JAM5 carrying strap | JAM5 strap connectors |
---|
Quick Start Guide
Control + Buttons card
Quick Start:
Placement guidelines
- For best Bluetooth® performance, place your mobile device within 30 ft. (10 m) of your speaker, and make sure there is a clear line of sight between you and your speaker. Moving your device farther away, or not having a clear line of sight may impact sound quality, and your device may disconnect from your speaker.
- Keep other wireless equipment at least 3 ft. (1 m) away from your speaker.
- Place your speaker and your device outside of and away from metal cabinets, other audio/video components, and direct heat sources.
CAUTIONS:
- Stand your speaker on its base. Standing your speaker on any other side may cause damage to your speaker and affect sound quality.
- Avoid placing your speaker on wet or dirty surfaces.
Connecting to power
Note Your JAM5 ships with a partial charge.
- Plug either end of the USB-C cable into the USB-C connector on your speaker.
- Plug the other end into the USB-C power supply.
- Plug the USB power supply into an AC (mains) outlet.
Operating your JAM5 speaker
BLUETOOTH® TECHNOLOGY
Pairing your mobile device
When you power on your speaker for the first time, the speaker automatically searches for your mobile device.
-
On your device, turn on the Bluetooth® feature.
Tip: The Bluetooth® feature is usually found in the Settings menu. -
Select your Trulli JAM5 from the Bluetooth® device list.
Pairing an additional mobile device
You can store up to eight paired mobile devices in the speaker pairing list.
Press and hold the + and – until you hear, “Pairing.” Pair your device to the
speaker
Reconnecting a device
When powered on, the JAM5 tries to reconnect with the two most recently
connected devices.
Note: The devices must have Bluetooth on and powered on.
STATUS INDICATORS
You can store up to eight paired mobile devices in the speaker pairing list,
and your speaker can be actively connected to two mobile devices at a time.
Note: You can only play audio from one device at a time.
Switching between two connected devices
- Pause audio on your first device.
- Play audio on your second device.
Clearing JAM5 Device History
- Press + and – until you hear “Factory reset.” All devices are cleared and your speaker is ready to pair a new device.
- Delete your speaker from the Bluetooth® list on your device.
Connect the USB cable
-
Using the USB-C cable, connect your device to the USB-C connector on your JAM5.
-
To eject simply remove the cable.
STATUS INDICATORS
Battery indicator
To check the battery charge level, tap the + and – quickly The JAM5 will
display the level of the battery on the LED bars.
Note: Battery performance varies with the content played and the volume level
at which it is played. In typical use, the speaker battery lasts up to 16
hours.
Pairing two JAM5s together
Pairing the speakers manually
True Wireless Stereo mode
- Make sure both speakers are powered on.
- Make sure one and only one speaker is connected to your mobile device.
- On the speaker connected to your device, press and hold and + simultaneously.
- Release the buttons when you see the LED bar scanning
- On the other speaker, press and hold and – simultaneously.
- Release the buttons when seeing the LED bar scanning. After 10 seconds, you hear “True Wireless Connected” from both speakers simultaneously. TWS mode is enabled. You are now able to play audio in unison using your device.
- For an optimal experience, position your speakers:
o In the same room or outdoor area within 5 feet apart
o There are no obstructions between them
Note: Performance may vary based on a mobile device, distance, and environmental factors.
CARE AND MAINTENANCE
Cleaning
- Clean the surface of the speaker and handle with a soft, damp cloth (water only).
- Do not use any sprays near the speaker. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia or abrasives.
- Do not allow liquids to spill into any openings.
Limited warranty
Your speaker is covered by a limited warranty. Details of the limited warranty are provided on the warranty card in the carton. Please refer to the warranty card for instructions on how to register. Failure to register will not affect your limited warranty rights.
Technical information
Input Voltage: 15V
Input Current: 1.89A
TROUBLESHOOTING
Contact Us
No question is too big or too small.
Website
TRULLIAUDIO.com/Support
Email
Alexa@TRULLIAUDIO.com
Telephone
US and Canada (English)
877-932-3245
Common solutions
The following table lists symptoms and possible solutions to common
problems.
No power (battery)
- The battery may be discharged. Connect it to AC (mains) power.
The battery does not charge
- Make sure you are using the Trulli Audio-provided USB cable and USB wall charger.
- Connect to a different AC (mains) power source.
Speaker does not pair with a mobile device
- On your mobile device, turn the Bluetooth® feature off and then on. Remove your speaker from the Bluetooth® list on your device. Pair your device again.
- Pair a different device.
- Clear your speaker’s pairing list. Pair your device again.
- Reset your speaker.
No sound
- Increase the volume on your speaker, your device, and your music source.
- On your mobile device, turn the Bluetooth® feature off and then on. Remove your speaker from the Bluetooth® list on your device. Pair your device again.
- Make sure voice prompts are on. Press the Bluetooth® button to hear the connected mobile device. Make sure you are using the correct device.
- Use a different music source.
- Pair a different device
- If two devices are connected, pause your other device.
No sound from a cabled device
- Power on the device and play music.
- Increase the volume on your speaker and device.
- Press and release the Input mode button until the Input indicator glows white.
- Use a different cable.
- Connect a different device.
Poor sound quality
- Use a different music source.
- Pair a different device.
- If there are two devices connected, disconnect the second device.
- Increase the volume on the device.
- Check device audio settings.
Poor sound quality from a cabled device
- Increase the volume on your speaker and device.
- Use a different cable.
- Connect a different device.
- Check device audio settings.
Resetting your speaker
A factory reset clears paired mobile devices and language settings from your speaker and returns it to the original factory settings.
- Power on your speaker.
- Press + and – for 7 seconds until you hear a tone.
- The JAM5 will turn off automatically
If you could not resolve your issue, see the table below to identify symptoms and solutions to common problems. If you are unable to resolve your issue, contact Trulli Audio customer service.
THANK YOU,
And enjoy your new JAM5. You can follow us on Social media and show yourself
using your JAM5.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>