BILIONE Upgraded Desktop Microphone Stand, Adjustable Mic Stand-Complete Features/Instruction Manual

BILIONE Upgraded Desktop Microphone Stand, Adjustable Mic Stand

Specifications

• DIMENSIONS : 12.6 x 7.28 x 2.95 inches
• WEIGHT : 2.18 pounds
• MAXIMUM HEIGHT: 10”
• MINIMUM HEIGHT: 5”
• BRAND: Bilione

The Bilione Desktop microphone stand has been designed to meet all the live streaming, broadcasting, audio recording, and more. It is a good weight stand which doesn’t clamp to your desk. The weight of the base of the stand is about 1.02lbs and a diameter of 4.89 inches or 12.5 cm. This weight of the base allows it to stand firmly on your desk and provides good stability. The stand can be adjusted to two heights one is 10” and the other is 14.5”. It also features two-screen pop-filters. The first pop filter is used to block air blasts as any normal pop filter would do. The second screen disperses any remaining pressure in the audio. This allows the filter to provide clear and good-quality audio. It banishes the hissing or lip-syncs sounds that come when the letter S is pronounced and blocks the plosives as well.

It comes with a good shock mount which can protect your microphone all around. It has a high elasticity wrap roping design that reduces vibrations from travelling in to mic. It doesn’t support Blue Yeti and is compatible with Blue Snowball, AT2020, AT2035, HyperX QuadCast, QuadCast S, Razer Seiren X, etc. it features a universal microphone clip which is suitable to hold most of the handheld microphones and dynamic microphones.

What’s in the box?

• 1 x adjustable microphone stand
• 1 x Shock Mount
• 1 x Pop Filter
• 1 x Microphone clip
• 1 x 5/8″ and 3/8″ Metal Screw Adapter

How to set up the stand?

You can set up the stand by following these steps:

1. Place the rod into the stand by rotating the screws.
2. Extend the arm of the stand from 10 inches to 14 inches according to your requirement, by rotating the knob that is present on it.
3. At the top of the stand, place the shock mount by inserting the stand in it and rotating it to fix it properly.
4. Place the microphone in the shock mount.
5. To place the pop filter, simply place the clamp on the end of the filter onto the arm of the stand.
6. Tighten the clamp using the knob to fix it firmly.
7. Move the bendable arm of the filter to adjust in front of the microphone.
8. If you want to place the mic directly without using the shock mount. Use the universal mic clip, by placing it at the top of the arm of the stand and rotating it. Place the mic in to the holder.

FREQUENTLY ASKED QUESTIONS

• Will this work with a dongle for iPods?
  No, it won’t work with a dongle for iPod.

• Does anyone know if this works with the Fifine USB microphone?
  Yes, it works with the Fifine USB microphone.

• Is this desk microphone stand suitable for SE Electronics-X1?
  Yes, it is suitable for SE Electronics-X1.

• Will this work with a Blue Spark mic?
  Yes, it will work with a Blue Spark mic.

• Will it work for the AT2020 condenser microphone?
  Yes, it will work with the AT2020 condenser microphone.

• Is this suitable for the Blue Yeti Nano?
  Yes, by using the attached adapter for mounting.

• Will this be able to hold the Audio Technica AT4040?
  Yes, it can hold the Audio Technica AT4040.

• Could it hold the HyperX Quadcast microphone and its shock mount?
  Yes, it can firmly hold the HyperX Quadcast microphone and its shock mount.

• Does this work with the AKG ARA microphone?
  Yes, it works with an AKG ARA microphone using the attached metal adapter.

• Does a RODE NT1A fit?
  No, it doesn’t fit.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>