JBUDS WNWNAQUDSR Air True Wireless Earbuds User Manual

JBUDS WNWNAQUDSR Air True Wireless Earbuds

We love that you are rocking Jlab Audio!
We take pride in our products and fully stand behind them.

YOUR SATISFACTION IS GUARANTEED

You may exchange or return merchandise within 30 days of the purchase date. Please return the item to the location you purchased it. If your item has been opened or used, restrictions may apply. YOUR WARRANTY
You may register your product at jlabaudio.com/register. All warranty claims are subject to Jlab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

CONTACT US Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact.

FIRST TIME SETUP: BLUETOOTH PAIRING

1. AUTO-CONNECTING EARBUDS
   Press and hold 3+ seconds on both buttons. White lights will flash to indicate earbuds are automatically pairing to each other.

2. CONNECTING TO BLUETOOTH
   Once earbuds pair, the right earbud will flash blue and white indicating the earbuds are ready to pair to your Bluetooth device.

3. CONNECTING TO BLUETOOTH
   Select “Jlab JBuds Air” in your device settings. Voice prompt “Bluetooth connected” followed by solid white lights will indicate you are connected.

BLUETOOTH PAIRING NEW/ ADDITIONAL DEVICES
When earbuds are powered off, press and hold Right Earbud button 1 O+ seconds. The earbud will flash blue and white indicating it is ready to pair to your Bluetooth device. Once connected, turn on Left Earbud to auto connect both earbuds.

ACCESSORIES

BUTTON FUNCTIONS

TURN ON / OFF
Press & hold 5+ seconds.

VOLUME DOWN

1. click. PLAY/ PAUSE
2. click.

VOLUME DOWN

1. click. PLAY/ PAUSE
2. click.

TRACK BACK
Press & hold 1 + second.

1. TURN ON / OFF
   Press & hold 5+ seconds.

2. VOLUME UP: 1 click.

3. ANSWER: 1 click. HANGUP: 2 clicks.

4. REJECT INCOMING CALLS
   Press & hold 1 + second.
   SIRI (iOS) or “OK GOOGLE” (ANDRIOD): 2 clicks.

5. TRACK FORWARD
   Press & hold 1 + seconds.

VOICE PROMPTS

1. “Hello”: Power ON
2. “Earbuds joined”: Earbuds paired to each other
3. “Ready to Pair”: JBuds Air are ready to pair to Bluetooth device
4. “Bluetooth Connected”: Earbud is connected to device
5. “Battery Full”: 100-75%
6. “Battery Medium”: 75-25%
7. “Low Battery”: Less than 25% When power decreases to 10%, “Low Battery” will play
8. “Goodbye”: Power OFF

EQUALIZER MODES

Click either the right or left earbud 3 times for different EQ settings (JBuds Air will cycle 3 EQ settings).

CHARGING EARBUDS

Placing the earbuds in the case will auto power off the earbuds and start charging. Solid blue lights will indicate charging and will turn off after earbuds are fully charged. Removing the earbuds from the case will turn on and auto connect to your device for next use.

CHARGING CASE Connect the JBuds Air to computer or USB 5V output device. LEDs pulse white when charging and turn solid white when fully charged.

FITTING

Try the optional Cush Fins and all ear tips for best fit and proper seal.

1. Hold the earbud vertical to the ear.
2. Twist in the ear canal to lock in.

WARNING
Fully dry off the earbuds before putting in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant but the case is not.

QUICK TIPS

• The Bluetooth connection is established from the right earbud.
  For most stable connection, keep the device near right hand side or in right pocket.

• When receiving/taking calls, only the right earbud will accept and play from your mobile device. The left earbud will mute during calls and continue playback after call ends.

WARM-UP YOUR HEADPHONES

Optional: Burn-in is the process for exercising new audio equipment. We recommend 40 hours of burn-in time for most headphones to reach optimal performance. The main purpose of the process is to loosen the diaphragm of a newly crafted headphone and to stress the headphone driver. Normal, everyday use can also burn-in the headphones though Jlab’s proprietary burn-in provides an ideal mix of sounds and frequency sweeps to achieve this.

• Burn in your audio equipment with the Jlab Audio app available on the App Store and Google Play.
• Or access the burn-in method at: jlabaudio.com/burnin

CAUTIONS

• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds, stressing the cable by rapid pulling or extreme force, or bending the cable at a sharp angle.
• Wax may build up in the earbud tips, lowering the sound quality. Carefully remove the wax with a cotton swab or other small tool to improve the sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• We recommend you treat your earbuds as you would a nice pair of sunglasses and keep them in safe location when not in use.

JLABAUDIO.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>