zoefrobot MR2600ZW LAWNMOWER Dirk & Betsie APP Handleiding User Manual
- June 4, 2024
- zoefrobot
Table of Contents
zoefrobot MR2600ZW LAWNMOWER Dirk & Betsie APP Handleiding
APP Download And Installation
The robot mower can be remotely controlled via the mobile phone APP. Please follow the instructions below or refer to the product guide in the APP interface APP Download and Installation Please scan QR Code below to download and install APP.
Or search for Zoef Robot Smart in the Playstore of APPStore
Activate Wi-fi Mode On The Mower
- Please ensure your garden is in strong Wi-Fi signal range;
- Power on the mower
- Setting -> Wi-Fi Setting -> Press ‘OK’ –> Update Success;
- Confirm Wi-Fi indicator light is now rapidly flashing.
Wi-Fi Indicator Light:
- Wi-Fi connecting standby: LED light blinking;
- Wi-Fi connecting successfully:
- LED light keeps on for 2 minutes then light off;
- Wi-Fi connecting unsuccessfully:
- LED light keeps blinking for 3 minutes then light off.
Open APP And Add Device Like Below Images
- Open Zoef Robot Smart APP, Sign Up and Login; Choose + to add device.
- At the top, choose Auto Scan, make sure the Wi-Fi indicator LED now blinks. (see page above)
- When the mower is found, Choose next
- Enter Wi-Fi password Current according to current Wi-Fi;
- Connecting;
- Mower connects successfully;
- After successful connection, you will enter operation interface.
Introduction Of APP Function
Start/ Pause Mowing
Under standby or mowing status, press ‘Start/ Pause’ button to start/ pause
the mowing job.
Cancel Mowing
Cancel the current mowing job under Paused status, then switch to Standby
status.
Recharge
Under standby status, press “Recharge’ button to return mower to dock station.
Under recharging status, press ‘Recharge’ button can stop the recharging job.
Spot Mow
Under standby status, press ‘Spot Mow’ button to start the spot mow function.
Under spot mow status, press ‘Spot Mow button can stop this job.
Quick Appointment
Under standby status, press ‘Quick Appointment’ to set the working time of the
mower needs to work.
Booking Mowing
Under standby status, enter interface by Settings-> Booking Mowing, then the
working time can be set.
Zone Mowing
Under standby status, enter interface by Settings -> Zone Movwing, then use
the zone mowing 8 function by setting the zone parameters including length and
ratio.
Notice:
- The distance refers to how far the mower will go along the boundary wire before entering into the yard. The percentage refers to how often the mower will start mowing from each zone.
- The value of distance should be 0-500m, while the percentage should be 0-100%. The sum of percentage of each zone should be 100%. Or the setting cannot be completed.