Dongguan Peiyu Electronic Technology A36 Wireless Karaoke Microphone and Speaker Instruction Manual

June 13, 2024
Dongguan Peiyu Electronic Technology

Dongguan Peiyu Electronic Technology A36 Wireless Karaoke Microphone and

Speaker

Dongguan-Peiyu-Electronic-Technology-A36-Wireless-Karaoke-Microphone-and-
Speaker-PRODUCT

Product Information

  • Bluetooth Name: IBSX-A36
  • Bluetooth Version: V5.3
  • Transmission Distance: 10m
  • Output Power: 8W
  • Speaker System: 3-inch full-frequency speaker
  • Rated Input: DC5V
  • Battery Capacity: 1200mAh
  • Usage Time: about 2-3 hours
  • Charging Time: about 2-3 hours
  • Signal-to-Noise Ratio: 90dB
  • Distortion Rate: 1%
  • Frequency Response: 80Hz-18KHz
  • File Format: MP3 and WAV support
  • FM Receiving Frequency Range: 87.5MHz-108MHz
  • External Sound Source: 3.5mm audio input

Product Usage Instructions

Please read the instruction manual before use.

Keys and Functions

  • 1: Short press to decrease the volume, long press for previous song/up channel selection.

  • 2: Short press to play/pause, long press to switch on/off, double-click for TWS connection/exit/FM automatic lock.

  • 3: Short press to increase the volume, long press for next song/down channel selection.

  • MODE key: Short press to switch between TF card/radio/AUX/Bluetooth, long press to switch light color. Double-click to switch the light. When the speaker is turned on and not connected to Bluetooth, double-click any one to conduct TWS pairing.

  • Shutdown: Press and hold the MODE key to turn off the speaker to prevent power loss when not in use.


  • Low Battery Alarm and Automatic Shutdown Function: When the battery power is less than 10%, the speaker will give a prompt sound. When the battery power is less than 3%, the machine will automatically shut down.

Back Interface Description

  • DC5V Type-C Charging Port: For charging the speaker.
  • Charging Indicator: Red light indicates charging, full red light indicates charging complete.
  • AUX Audio Input Port: Insert 3.5mm cable to automatically enter AUX mode.
  • TF Card Socket: Insert TF card to automatically play music (supports MP3 and WAV formats, maximum support of 32GB).
  • USB Socket: Insert USB flash drive to play music automatically (supports MP3 and WAV formats, maximum support of 32GB).

Microphone Operating Instructions

To use the wireless microphone, turn on both the speaker and microphone simultaneously. They will automatically pair through 2.4G wireless signals. Adjust the buttons according to your preferences to achieve your favorite style of sound.

Precautions for Product Use

  1. Do not try to disassemble or replace any parts in the product unless specified in the manual.
  2. Do not put the product into water or any other liquid as it is not waterproof.
  3. If any liquid accidentally enters the product, immediately disconnect and remove the product.
  4. Avoid placing the product near heat sources or direct exposure to fire sources.

Product specification

  • Bluetooth name: IBSX-A36
  • Bluetooth version: V5.3
  • Transmission   distance: ≦10m
  • Output power: 8W
  • Speaker system: 3-inch full-frequency speaker
  • Rated input: DC5V
  • Battery capacity: 1200mAh
  • Usage time: about 2-3 hours
  • Charging time: about 2-3 hours
  • Signal-to-noise ratio: ≥90dB
  • Distortion rate: ≦ 1%
  • Frequency response: 80Hz-18KHz
  • File format: MP3 and WAV support
  • FM receiving frequency range: 87.5MHz- 108MHz
  • External sound source: 3.5 mm audio input.

Wireless karaoke microphone & speaker

operation instruction

Please read the instruction manual before use.

Keys and functions

  1. Short press to decrease the volume, long press the previous song/up channel selection key
  2. Short press, play/pause, long press the switch, double-click TWS connection/exit/FM automatic lock
  3. Short press the volume increase, long press the next song/down channel selection
  4. MODE key: Short press TF card/radio//AUX//Bluetooth switch and long press to switch the light color. Double-click the switch. When the light speaker is turned on and not connected to Bluetooth, double-click any one to conduct TWS pairing, and it will enter the pairing mode, and wait for the pairing to succeed within 30 seconds. ~ Shutdown: when the speaker is not used, press and hold the “M” key to turn it off to prevent power loss.
    • Low battery alarm and automatic shutdown function: when the battery power is less than 10%, the speaker will give a prompt sound, and the speaker should be charged in time at this time. When the battery power is less than 3%, the machine will automatically shut down

Back interface description

  1. DC5VType-C charging port
  2. charging indicator
  3. AUX audio input port, insert 3.5mm cable to automatically enter AUX mode
  4. TF card socket, and insert TF card to automatically play music (supportin g TF card playback, with a maximum support of 32G (supporting MP3 and WAV m usic formats).
  5. USB socket, insert USB to play music automatically (support USB flash dr ive, maximum support 32G (support MP3 and WAV music formats)

Microphone operating instructions

Dongguan-Peiyu-Electronic-
Technology-A36-Wireless-Karaoke-Microphone-and-Speaker-
FIG-4

Description of product operation

Bluetooth mode

  1. Bluetooth connection: Bluetooth mode is turned on by default. Enter Bluetooth mode or press “M/*” to switch to Bluetooth mode, turn on Bluetooth scanning of mobile phone, search for “IBSX-A36” and click Pairing. After the connection is successful, there will be a prompt tone, and Bluetooth is connected.
  2. Play music: Turn on the Bluetooth of your mobile phone or other devices and play your favorite songs.
  3. After the machine is connected to the mobile phone once, Bluetooth has a memory function, and it can be automatically connected or manually connected after the machine is turned on: if it is necessary to disconnect, Bluetooth can be forcibly disconnected through the Bluetooth device of the mobile phone or by double-clicking the power-on key.

TF card/USB mode

  1. When a TF card/USB is inserted, the machine will automatically play it after insertion with a prompt tone. When all TF cards are inserted, you can switch by pressing the “M/*” button

AUX (external audio input) mode

  1. When the AUX external audio cable is plugged in, the audio will be automatically inserted and played first, and there will be a prompt tone.
  2. When both AUX and TF cards are inserted at the same time, they can be switched by pressing the “M” button

FM mode: Bluetooth mode is the default mode after startup. You can switch to FM mode by pressing the power button briefly (if there is a TF card and Line in, you need to press it twice) (special note: you need to plug in a USB charging cable to search for a radio station). When you enter FM mode for the first time, you need to double-click the play pause button to search for FM radio stations. When you search for a radio station, you can scan it completely from 87.5 to 108.0MHZ, and the radio station will be automatically saved when you scan it.

Indicator light status

  1. Charging indication: The charging red light is on, and the full red lig ht is off.

Description of music light

  1. This product has six music light modes, namely: color horse racing, gra dual breathing (red, blue and green alternating gradual breathing, red brea thing, blue breathing, green breathing, and turning off the light effect; P ress the “m/”key every long time to switch a lamp effect. Double-click the M key to switch the light.

Use of wireless microphone

  1. The speaker and microphone are turned on at the same time, and the 2.4G wireless signals are automatically paired. At this time, users can start to shout wheat, and they can make buttons to adjust to their favorite style according to their own preferences.

Precautions for product use

  1. Do not try to disassemble or replace any parts in the product unless the operation mode is specially marked in the manual
  2. Do not put the product into water or any other liquid, this product is not waterproof.
  3. If any liquid accidentally enters the product, please immediately disconnect and remove the product.
  4. Do not place this product near a heat source or directly expose it near a fire source.
  5. Do not place this product in an environment with strong electromagnetic force, otherwise it will lead to product failure. When the microphone squeals, please move the direction of the microphone, or move the sound distance far away to eliminate the squealing.

The FM reception effect is not good, special note: you need to plug in the USB charging cable to search for the radio station. Please adjust the direction and position of the speaker or check whether there is electronic equipment interference nearby.

Packing List

  • Speaker× 1
  • Charging Line× 1
  • Instruction x1
  • Microphone: x1

FCC Warnning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals