Lion Country Supply Whelping Supplies Basic Kit Instructions
- June 1, 2024
- Lion Country Supply
Table of Contents
Lion Country Supply Whelping Supplies Basic Kit
INSTRUCTIONS
- Remove the two components from the packaging.
- The whelping nest
- The controller
- Plug the whelping nest into the controller.
- Plug the small cable into the connector on the rights side.
- Plug the controller into wall 110v outlet.
- The unit should automatically turn on when plugged in. If it does not, turn the unit on using the button on top of the controller.
The controller is preset at 94 degrees f. On the right side of the displays, you will see two temperatures, high and low. This Is the range we preset before shipping.
The red light indicates that the unit Is heating. You may here the unit cycle when turning on, this Is normal and should be expected.
The large temperature is the Interior temperature of the unit and may be +/-1
to 2 degrees.
The overall surface of the unit may have a variance of+/- 1 to 2 degrees.
DO NOT SUBMERGE IN WATER . THE Surface IS WATER PROOF BUT THE
ELECTRONCIS ARE NOT.
FOR INDOOR USE ONLY••
47HE UNIT IS SEALED CLOSED, 00 NOT ATTEMPT TO OPEN. OPENING THE NEST WILL
VOID ANY WARRANTY CLAIMS AND MAY CAUSE ELECT.RIC SHOC
DO NOT PWG THE WHELPING NEST INTO THE WALL SOCKET WITH OUT TME
CONTROLLER***
The whelpling nest has a one- year warranty starting on the date of purchase
for parts and workmanship. Warranty claims should be made by phone to
918-333-4872 or
cas@custommoldinges.com. Do not return the
unit for warranty to an authorized dealer. Do not ship parts without a return
merchandise authorization (RMA) number. Packages without
authorization will be returned to sender.
For returns other than warranty, contact the authorized dealer and not CMS.
**IMPORTANT CAUTION***
DO NOT ADJUST TEMPERATURE ABOVE 96 DEGREES AND DO NOT MAKE THE HIGH LOW TEMP MORE THAN 1 DEGREE DIFFERENCE. THE UNIT IS EQUIPPED WITH AN INTERNAL TEMPERATURE SAFETY SWITCH. TO HIGH OF A TEMPERATURE WILL CAUSE THE INTERNAL SENSOR TO SMITH THE UNIT OFF AND WILL TAKE UP TO 45 MINUTES TO RESET. WE RECOMMEND LEAVING THE PREST TEMPERATURE AT 94 DEGREES.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>