DELL T99W373PC15 5G WWAN Module Instructions

DELL T99W373PC15 5G WWAN Module

Product Information

Specifications :

• Compliance : FCC Part 15, Industry Canada license-exempt RSS standard(s)
• Frequency Band : 5.925-7.125 GHz
• Operating Conditions: Must not cause harmful interference, must accept any interference
• Antenna Requirement : Must not be co-located or operating with other antennas or transmitters

Product Usage Instructions

FCC Guidelines:

1. Reorient or relocate the receiving antenna if experiencing interference.
2. Increase the separation between the equipment and receiver to minimize interference.
3. Connect the equipment to a different circuit than the receiver if interference persists.
4. Consult the dealer or a radio/TV technician for assistance if needed

FCC Caution:
Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment. Do not co-locate this transmitter with any other antenna or transmitter.

Industry Canada Guidelines:

1. Ensure the device does not cause interference with other equipment.
2. Accept any interference that may affect the device’s operation.
3. Avoid co-locating the device and its antenna(s) with other transmitters, except tested built-in radios.

FAQ (Frequently Asked Questions)

• Q: Can I operate this device in the 5.925-7.125 GHz band?
  A: No, operation in this frequency band for control of or communications with unmanned aircraft systems is prohibited.

Federal Communication Commission Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

• Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
• This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Radiation Exposure Statement:
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.

Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

Industry Canada statement

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>