TIMEFLYS RS5-PALADIN Audio Baby Monitor User Manual
- June 1, 2024
- TIMEFLYS
Table of Contents
TIMEFLYS RS5-PALADIN Audio Baby Monitor
What Is In The Box
-
Baby Unit *1
-
Parent Unit *1
-
Type C Power Cords *2
-
User Manual *1
Quick Setup
-
Plug parent & baby units with type C power cords or install AAA alkaline battery or AAA NiMH rechargeable battery*, make sure your baby units and parent unit are more than 6 feet (2 meters) apart to avoid screeching noise.
-
Power on both units and tune to same channel (Channel A or B).
-
Place the baby unit more than 3 feet (1 meter) away from your baby. Do not place this product on an unstable table, shelf, stand or other unstable surfaces. When power on, you could hear baby’s sound via parent unit.
*Note : AAA NiMH rechargeable battery will be charged when connected with AC power. The indicator light will be in green steadily if the battery is fully charged. The indicator light will be flashed in red when the battery is low.
Safety Instructions
Please read and follow the instructions below prior to using this product.
- This product is not a toy, do not allow children to play with it.
- Strangulation Hazard: please keep the cords away from children for at least 3 feet (1 meter) in order to avoid strangling and choking
- Do not place the baby monitor in or near the crib or playpen. Always locate this product out of children’s reach (at least 3 feet/1 meter away).
- Avoid exposure to direct sunlight and any nearby heaters.
- Do not use or place the product near water, for example, next to the bathtub, sink. laundry machines, shower, swimming pool, or any other wet liquid-based containers.
- Use the adaptor provided in the package or the standard adaptor with correct polarity and voltage(input: 100-240V 50/60 Hz 0.2A; Output: 5V … 1 000mA).
- Only use the charging cables included in the package, do not use other unofficial third party cable to charge the unit. This might result in overheat or electronic component damage.
- Only use the included rechargeable battery for the baby monitor, do not replace it with other batteries. Do not disassemble, squeeze, heat or throw it into the fire.
- Do not overload the wall outlet or use an extension cord.
- Do not place this product on any unstable surfaces or objects.
- Always unplug the baby monito,- from the wall outlet and power source when unused.
- Do not insert any sharp or metal objects into the plug contacts. This might cause electric shock.
- Unplug the product from the power supply before cleaning. Do not use any liquid or aerosol cleaners. Use a dry cloth to clean only.
- Avoid spilling any liquid kind on this product.
- This product is specifically designed for baby care and is not a replacement for adult supervision.
- This product is not designed as a medical device.
- Always test the baby monitor and check the reception status after having moved its setup location. The signal may be affected by the item amount and materials of the wall, items/ or other operation devices that also use 2.4Ghz.
- If the baby monitor is not properly functioning 1please contact the customer service team as soon as possible in order to ideally fix the issues.
This device complies with part 15 of the FCC Rules. Operation is subject to
the condition that this device does not cause harmful interference (7) this
device may not cause harmful interference. and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Changes or modifications are not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions1 may cause harmful interference to
radiocommunications. However, there is no guarantee that interference will not
occur in a particular installation.
if this equipment does cause harmful interference to radio or television reception1 which can be determined by turning the equipment off and on1 the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receivals connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>