LWYTJO X0091 Short Light Fixture Instruction Manual
- June 2, 2024
- LWYTJO
Table of Contents
LWYTJO X0091 Short Light Fixture
DIMENSION
WHAT IN THE BOX
INSTALLATION INSTRUCTION
- Install the short arms 2 on the canopy 4 with lock nut and teeth lock washer 1.
- Install the long arms 3 on the canopy 4 with lock nut and teeth lock washer 1.
-
Pull the orange operating handle A to open the inlet hole, and insert the wire B.
-
Press the operating handle A to finish the wiring.
(Note: one inlet hole can put 2 or 3 wires inside) -
Connect all the wires by parallel with splicing connector 6(all live line-L use one connector, and neutral Line-N use another connector).
-
Install the bracket 7 on the junction box with screw.
-
Connect wire 8 to your home line.
-
Install the fixture on the bracket with screw 5.
-
Install the bulbs 9.
X0091-4
Please read carefully before installation!!!
Note : Please make sure that the electricity is powered off during installation! Only a professional electrician should install this kind of product!
Specifications
- Short Arm Components: Lock nut and teeth lock washer x 2, Short light arm x 2
- Long Arm Components: Lock nut and teeth lock washer x 2, Long light arm x 2, Splicing connector x 2
- Other Components: Canopy x 1, Screw x 2
Frequently Asked Questions (FAQ)
Q: Can I install this product without prior electrical knowledge?
A: No, it is recommended that only a professional electrician installs this
product due to safety reasons.
Q: How many wires can fit into one inlet hole?
A: Each inlet hole can accommodate 2 or 3 wires.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>