pertura LBS37S Glas Wall Mounting Instruction Manual
- May 15, 2024
- pertura
Table of Contents
Apertura LBS37S Glas Wall Mounting
Product Information
Specifications
- Model: Pertura LBS37S
- Mounting: Glass Wall Mounting
- Dimensions: 37 x 51 x 5.5 cm
- Weight: 172 g
- Material: Glass
- Accessories: Single side adhesive tape, 4×25 screws, 5mm hex key, 10-13mm open-end wrench
Product Usage Instructions
Mounting Instructions
- Identify the suitable location on the wall for mounting the glass.
- Use the provided single-sided adhesive tape to secure the glass to the wall temporarily.
- Mark the positions for drilling holes based on the mounting bracket on the glass.
- Drill holes using a suitable drill bit according to the marked positions.
- Attach the glass to the wall using the provided screws and tighten them securely.
- Use the 5mm hex key to ensure all screws are tightened properly.
Maintenance
Regularly check the mounting to ensure stability. Clean the glass surface with
a damp cloth and mild detergent as needed.
Safety Precautions
- Handle the glass with care to avoid breakage.
- Avoid placing excessive weight on the mounted glass shelf.
- Keep small parts and tools away from children.
Frequently Asked Questions (FAQ)
-
Q: Can I mount this glass shelf on any type of wall?
A: It is recommended to mount this glass shelf on solid walls for stability and safety. -
Q: How much weight can this glass shelf support?
A: The glass shelf can support up to 18Nm of weight when installed correctly following the instructions provided. -
Q: What should I do if the glass shelf becomes loose over time?
A: Check the screws and tighten them using the 5mm hex key provided. If needed, reapply adhesive tape for additional support.
Parts List
Dimension
Wall Mounting
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>