ATEZR P5 40W Laser Engraving Machine Instruction Manual

: May 15, 2024
: ATEZR

Table of Contents

Dear user:
Packaging List
Adjust The Belt Tension
FCC STATEMENT :
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ATEZR P5 40W Laser Engraving Machine Manual

Dear user:

Welcome to join! Thank you for purchasing the P5/P10/P20 Plus/V35Plus with Atezr. Are you ready for the new experience of a lifetime? We sincerely hope you enjoy the next phase journey of discovery. Remember, Atezr is there for you wherever you are!

Packaging List

Product Manual

USB card and card reader

Brush

Wire tie

Toolkit

Cautions

High-intensity laser beams generate extremely high temperatures and a lot of heat as cutting burns the substrate quantity. Certain materials may catch fire during cutting, creating gas and smoke. Do not leave the machine unattended during the engraving process. After use, be sure to clean up the sundries and inflammables in the machine. Always keep an available fire extinguisher nearby to ensure safety. When using a laser engraver, the material generates fumes, vapors, particles, and toxic materials in plastics and other combustible materials. These smog or air pollutants may harmful to health.
When installing the equipment, make sure that the workplace must be clean and that there are no flammable or explosive items. A sheet of metal must be placed under the bottom when engraving or cutting.
When using the laser engraving machine, it is recommended to wear laser safety goggles. Avoid skin exposure to type 4 beams, especially at close range. Youth aged 12-18 must have parental supervision during use. Do not touch the laser engraving module when the machine is on.

A1
A2

Y-axis left and right slide rails

B1

B2

Upper and lower support beam

C

X-axis slide rail
D

Adjustable rod

E1 E2 E3 E4 F
Support feet Laser module

Step 1 Framework assembly

Step 2 Install the belt tension adjustment nut

Step 3 Install the X-axis assembly

Step 4 Install the bottom support feet

Step 5 Install the Adjustable rod

Step 6 Mounting the Laser

Tighten the laser module adjustment knob (Rear of the laser module).
Step 7 Install the cable tie
Step 8 Install the cable tie

6 holes are connected to the motor

4 holes are connected to the laser module

2 holes are connected to the limit switch

Pay attention to the front and back of the interface.
6 holes are connected Be aware to insert correctly.

Mission Completed
Congratulations!

Adjust The Belt Tension

Y axis:

Loosen the fixing nut on the side
Adjust the back tightening nut, and adjust the belt to the proper tightness
Tighten the side-fixing nut

X-axis:

Loosen the fixing nut on the side
Adjust the back tightening nut, and adjust the belt to the proper tightness
Tighten the side-fixing nut

Adjust The Belt Tension
How To Focus

Release the laser module and turn the focus setting lever down
Move the laser module until the focus setting lever reaches to the engraving material
Lock the laser module
Turn up the focus setting lever

Engraving Software

LIGHTBURN
https://lightburnsoftware.com/

Laser GRBL
https://lasergrbl.com/

After-sales and Warranty Policy:

All ATEZR laser engravers are warrantied to the original purchaser only, when purchased through an authorized seller of ATEZR products for a period of one (1) years from the date of purchase, to be free of manufacturer defect or failure. (Note: ATEZR will require the proof of purchase and the date of purchase upon the claim.) Lifetime technical support will be added to after-sale services.
ATEZR laser engraving machine can update an extended warranty period. Please contact to ATEZR customer service department for more detailed information.
The ATEZR warranty is limited to defects, malfunctions, or failure to function properly, based on the manufacturer’s defect. Any cause of improper use, lack of maintenance, inappropriate use caused the damage to personal items, incorrect or insufficient power to the equipment, and similar failures not related to manufacturer’s defects will not be covered.
ATEZR will not be responsible for the failure of the product, or the loss caused by the operation or use of the product.
In addition, the warranty will cover the repair or replacement of related equipment with new or refurbished equipment during the warranty period, or in some cases replacement of parts of the same model, at ATEZR’s sole discretion.As part of the ATEZR warranty, if separate parts are required to replace, ATEZR will directly provide the new separate part to the customer instead of replacing the entire machine. Such conditions may include but are not limited to belts, rollers, motors, or any other items that ATEZR deems more suitable to be supplied separately.
If you need after-sales service, please find the specifically authorized dealer for the product you purchased. If authorized the dealer does not respond to your problem, please contact the ATEZR official to file a complaint and obtain the warranty rights. ATEZR customer service department: service@atezr.com

The terms and conditions of the ATEZR warranty are subject to change without notice. Be sure to check the terms of the ATEZR warranty prior to your purchase.

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.