Lensbicon LXBK-001 Intelligent Dynamic Zoom Glasses Instruction Manual

LXBK-001 Intelligent Dynamic Zoom Glasses
Instruction Manual Product instruction manual

Overview:

The company independently developed this smart glasses with independent intellectual property rights.
Uses and main features

1. Scope of application: under 18 years old, myopia less than 600 degrees, astigmatism less than 100 degrees of people without eye disease.
2. According to the user’s individual vision condition, customize the use cycle and determine the use plan.
3. Each parameter is tailored according to the detailed vision of the user at the time of registration. In the later stage, the system automatically adjusts according to the vision improvement data uploaded by the user and fed back to the cloud data center through the network information.
4. It does not affect the normal use of eyes during use.

Principle and parameter

1. Yuncai dynamic glasses are based on the principle of brain vision and Bates theory, and use scientific and technological means to carry out accurate and intelligent zoom training to achieve active prevention and control of myopia in teenagers.
2. The rated voltage is 5V DC power supply.
3. Data signal connection requirements: Connect to the smartphone APP via Bluetooth, and connect the smartphone APP to the cloud data center.

Precautions for use:

1. Placed in a cool, dry, ventilated, non-corrosive gas and explosive gas indoor environment, this product is strictly prohibited to wash, avoid using chemical agents such as cleaning agents to wipe the body and lenses.
2. Ambient temperature: 0℃ ~ +40℃; Relative humidity: 10% ~ 70%.
3. Need normal visual light source environment, illuminance to meet the user’s normal eye needs for reading, writing, using electronic products, etc.
4. It is strictly prohibited to use during intense exercise and strong vibration.
5. When wearing, handle gently to avoid chafing the surface of the lens.
6. When failure occurs, non-professional authorized maintenance personnel shall not disassemble and assemble this product without authorization.
7. Please store the product in the box when you do not use this product. Please pay attention to eye hygiene and do not use your eyes too much (such as watching mobile phones, computers, games, etc.).

Product instructions:

The graphics provided in this manual may not be the same as the actual, please refer to the actual.
This product is subject to change without notice!

1. Before using the product, please ensure that the product is charged, and please follow the operation instructions of the product.
2. Product boot: Long press the start switch “A” for 2 seconds, the work indicator “C” is green, indicating that the product is started.
3. During the use of the product, the work indicator “C” always shows green.
4. Use the original standard charging data cable, connect to the USB charging interface “B”, and the product starts charging.
5. During the charging process, the charging indicator “D” shows red. Please stop using the machine when charging.
6. When the charging is complete, the charging indicator “D” is off.
7. Product shutdown: Long press the start switch “A” for 2 seconds, the work indicator “C” is off, indicating that the product is shut down.

Troubleshooting:

1. Long press the start switch “A”, the product does not turn on or work,
   please try charging.

2. If the card machine is faulty, use the reset key to forcibly restart it. The original data will not be lost.

3. For other faults, please go to the product purchase store or designated after-sales service outlet for identification and maintenance by professional maintenance personnel.

FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential  installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no  guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged  to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer
could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>